Helo sir, when I put a CD in to my Sony DVD player, it showing the below msg: 'not accpeting due to area problem!! My cousin brought this from USA

http://www.multi-region.net/lg
shuold do it

HI,

I'll let you know the region code for it.

I WILL GIVE U IN A MOVEMENT

as my name is antoaloysius from bangalore india i brought 2ns of nwe042 walk men but for the past 1year i am trying to load the soft ware i even took to sony show room but they said that its not possible sir
please tell me what is the correct soft ware sir and even you can tell me which show room in bangalore has the soft ware i will go there sir
i will bewaiting for your kind reply

antoaloysius

Try below steps
- Check network wiring path (connectivity to the antenna) - Re-Hot PA - Re-Hot RF area
Try do as per attached picture shown below

Check this link out :

http://support.microsoft.com/kb/935466

And try to download and install the below codec pack and its free

"http://www.free-codecs.com/k_lite_mega_codec_pack_download.htm"

Thank you

Dear Sir,
Try to check the data cable of your dvd player.

It cannot be done. The Decode is different for each region. USA is falling behind in this technology.

DVDs are encoded to a particular region and will only play on dvd players that are encoded to accept that region. Usually a computer dvd reader is region free meaning that it can play DVDs from any region without a problem. For example the USA is region 1 and Austrailia is region 5. A disc made for Australia (region 5) will not play in a standard USA player (region 1). see this link on Wikipedia for more information HERE . The good news is that sometimes you can set up your DVD player to accept discs from any region. If you are interested let me know the exact model of your DVD player and I will look it up. Please rate me well if this has helped.

The unlock method should work for DVD players bought in regions 1 (USA) and 3 (south East Asia)

You need to use a One4All Universal remote for regions 1 & 3

1. Switch on the player
2. Pop open the CD compartment
3. Enter the following code (using the remote): 2812
4. Highlight the region
5. Change to 9 (for Multi-region) using the 'Enter' button
6. Hit 'Clear' to exit