Touch screen color black and has a wireless radio and has a camera

Start - Programs - Canon Utilities - U-Scan Utility

1. Make sure that the machine is turned on.
2. Flick the HOME screen, then tap Scan. ...
3. Tap Attach to E-mail.
4. Tap the computer to forward the scanned data. ...
5. Specify the settings as necessary. ...
6. Load the original on the platen glass.
7. Touch the Color button for color scanning, or the Black button for black & white scanning.

Canon : PIXMA Manuals : MG7100 series : Attaching the ...

ij.manual.canon > Manual > ug_scanning0800

Canon : Manuals : MG7120 : Scanning Easily Using IJ Scan ...

ij.manual.canon > WebPortal > PTL > ptl-service > mdl...

MG7120Scanning Easily Using IJ Scan Utility - Windows - IJ Scan Utility is an application for scanning photos, documents, and other items easily. Complete from scanning to saving at one time by simply clicking the corresponding icon in the IJ Scan Utility main screen.

Could be interference or a wire is corroded or shorting out. Most likely the wire.

Check your Users Manual , All cameras set in different ways

I'm assuming this is a DVD player or at least contains a video screen. The message you are seeing sounds like the rear camera input has been activated. They give this alert to inform drivers that the view through the rear cam may be reversed. Most cameras have a switch setting to allow this adjustment.

If you do not have a rear camera installed, then it sounds to me like the rear camera trigger has been improperly connected. This is a wire that when it sees a 12-volt signal, activate the rear cam input on the radio. If you do not have a rear camera, this wire should not be connected. You did not give a make/model so I cannot begin to guess the wire color, but look for a wire that is not either black, red, yellow, white, gray, green, violet, or blue (with or without stripes). There is no standard color for this wire. Some Alpine units use orange/white, but on most radios, this is a dimmer wire. Pioneer and Kenwood often use a light purple or purple/white.

Find out what wire is for reverse camera and disconnect it.

you find it your radio catalogue correctly.

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

yes it can be fixed.if you registor your camera and it is still under warnty, they should replace the screen ,or maybe the cam.

Sounds like a cracked screen. My Rebel t1i looked the same way when i dropped it a month ago. Not sure of cost to repair i never looked into it but probably not cheap.

Your screen is broken. It needs to be replaced.

Right, Following is part number of required flexible wire..
" 1-864-761-11 " --FP-185 FLEXIBLE BOARD
It is available in Part Store for $26
Qualified tech will charge approx $100 to fix this camcorder.
Good luck.