Had the same problem but pump seemed to be trying to pump out. Took out the dishwasher and tilted it back 45 degrees until the water ran out - bit messy. Put it back on the level and try the start/reset. It worked for me. Seemed like something blocked and draining the water sorted it. Had a similar problem with an indesit a few years back and the same thing worked with that
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is important to find out which light is flashing - if you have an LCD display then is there any character like Fxx or Uxx on it.
Which LEDs on the drawer door lid top are on. If water is not draining then it is linked to the rotor pump or drain sump being blocked.
Not sure what you mean by beeping "delay" I am not sure if there is any such light on the dishwasher. The HRS DELAY is displayed on the LCD when dishwasher has been set in delayed start mode. Are you seeing this flashing in an orange background?There could be several reasons for water not draining. Does the beeping go away if you press the power on/off button? Also does the delay flashing stop. Have you checked to see nothing is blocking the drain pump which is the same rotor that drives the washer arms.. What about the kitchen down pipe - is it clear?
If you think you have to take the drawers out to reach the drain hose then follow instructions on page 7 step 2 of the installation manual. It is for a later model but your one should be similar.
Make sure you turn the mains power off when working inside the dishwasher.
your not alone. i to have this error 4 and so do hundreds of others.it means low water level even like mine your water level probably isnt low.what happened to mine was the sensor got a layer of fat and oil scum buildup on it and couldnt detect the water level so i cleaned it and worked good for another month. then same problem.solution- dishwasher had an "accidental short due to water leak" wich insurance covered and bought me a new dishwasher (fisher and pikel) now no more problem