Question about Food Processors

Open Question

KitchenAid food processor KFP 350 stem support for blade

Hi, my kitchen aid broke last nite...this is the 2nd food processor that has broken IN THE SAME Place....I think its called stem support for the blade

Posted by on

3 Suggested Answers

ThaMp3Doctor
  • 8596 Answers

SOURCE: Kitchen Aid food processor, model # KFP 700 from 1970s

The closest I have seen recently - there is an auction for a complete KFP-700 with work bowl/lid intact on eBay right now:
http://cgi.ebay.com/Kitchen-Aid-12-Cup-Food-Processor-model-KFP-700_W0QQitemZ150328616612QQcmdZViewItemQQptZSmall_Kitchen_Appliances_US

-Tha Mp3 Doctor

Posted on Mar 14, 2009

  • 145 Answers

SOURCE: I have a kitchen aid food processor, it is on, but motor doess no

This sounds like an issue relating with the assembly of the machine. The motor is definitely getting power if the indicator is lit. However, Kitchenaid food processors are designed (as a safety feature) to remain unengaged if the unit is not assembled in such a way. Here is the proper assembly:

Please disassemble the unit. This means: removing the blade, removing the work bowl, the work bowl cover, and unplugging the unit.

Starting with the work bowl: place the handle at the 9 o'clock position, which is out to the left. Rotate downward to the 6 o'clock position until it locks in, centered over the button panel.

Repeat the process with the work bowl lid.

Depending on which food processor you have, you may need the feed tube pusher depressed at least half way down the feed tube.

Plug in the unit. The blade does not have be installed for unit it to work at this point, assuming everything is assembled properly and the motor is functioning. The motor should now be working.

Posted on Jul 07, 2009

  • 145 Answers

SOURCE: kitchen aid model kfp 7

This may be caused by a number of factors. Most commonly, it is because the work bowl is being over-filled or too much pressure is being exerted on ingredients as they fall through the feed tube. Doing this may cause the disc to come off balance and start sheering plastic.

Call Kitchenaid Customer Service and provide them with this description. They will replace the unit free of charge, regardless of it's age or warranty. Their toll-free telephone number is:

1.800.541.6390.

Posted on Aug 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a dough blade for kitchenAid food processor Model 4KFP 600 WH


Kitchen Aid list them, it's on this page called blade, dough

http://www.kitchenaidpartsonline.com/modellookup/index/thirdstep/keyword/KFP600/model_no/KFP600WH/model_id/398686/diagram_id/10083552

Feb 24, 2015 | KitchenAid Food Processors

1 Answer

Looking for a base for Kitchen Aid food processor KFP 700.


Base of motor housing or whole motor unit assembly?

Oct 04, 2014 | Food Processors

1 Answer

How can I get kitchen aid blade out that is stuck


The blade will be stuck on the shaft and both will be damaged and require replacement. With that knowledge you now understand that drilling a hole sideways through the blade cap isn't wrecking anything you are going to use again. You can then get something into the hole for leverage. Here in NZ blades are under $20 and motor shaft sleeve is about $5. If you don't replace the parts it will happen again.

Aug 11, 2014 | KitchenAid Kitchen Aid 13-cup Food...

1 Answer

Blade spins and hits side of bowl


Get in touch with Kitchen Aid, that should not be happening.

Feb 19, 2014 | KitchenAid Food Processors

1 Answer

Need a replacement lid for KFP350 Kitchen aid food processor(#4176396). Any available? Any lids that are compatible with this machine (5 cup)?


My KFP350"s "driver stem" just broke so I may not be needing any of my other parts. If you are interested in any remaining parts (all still working perfectly and the mini bowl has never been used) then please contact me!

Aug 22, 2013 | KitchenAid KFP350 Little Ultra Power 5...

1 Answer

Do you have a manual for kitchen aide food processor KFP 600


Here is a link to the KFP600 User manual on KitchenAids website:
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Instructions%20and%20Recipes%20-%209701758.pdf

If you ever need any parts, remember us at The Mending Shed, we can repair anything under the moon, and we are a Authorized KitchenAid service center, we carry all of the parts for their food processors.

Thank you,

Colleen
Customer Service
MendingShed.com
800-339-9297

Jan 19, 2013 | KitchenAid KFP600 Ultra Power 11 Cups Food...

2 Answers

Kitchen Aid food processor, model # KFP 700 from 1970s


The closest I have seen recently - there is an auction for a complete KFP-700 with work bowl/lid intact on eBay right now:
http://cgi.ebay.com/Kitchen-Aid-12-Cup-Food-Processor-model-KFP-700_W0QQitemZ150328616612QQcmdZViewItemQQptZSmall_Kitchen_Appliances_US

-Tha Mp3 Doctor

Mar 12, 2009 | KitchenAid Food Processors

1 Answer

Kitchen aid model kfp 7 The wide slicer disk cut into the top of the cover leaving pieces of plastic in the sliced potatoes. What would cause this to happen.


This may be caused by a number of factors. Most commonly, it is because the work bowl is being over-filled or too much pressure is being exerted on ingredients as they fall through the feed tube. Doing this may cause the disc to come off balance and start sheering plastic.

Call Kitchenaid Customer Service and provide them with this description. They will replace the unit free of charge, regardless of it's age or warranty. Their toll-free telephone number is:

1.800.541.6390.

Aug 25, 2008 | KitchenAid KFP740 Food Processor

Not finding what you are looking for?
Food Processors Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Food Processors Experts

Ryan S
Ryan S

Level 2 Expert

328 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

clay_pots_47
clay_pots_47

Level 1 Expert

7 Answers

Are you a Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...