Question about Mitsubishi WS-55511 55" Rear Projection Television

1 Answer

Ws-55511 What does a 11 code stand for?

Posted by on

  • skipperone1 Aug 11, 2008

    umm....total series of blinks is 20, but after watching the blinks, the light just comes on, goes off, comes on, goes off. Not even a glimps of a double or triple blink. In your experience, is this a common problem with this television?

  • skipperone1 Aug 11, 2008

    I appreciate your help. I think I'm just going to call someone out before I end up throwing a brink throgh the front if it. Thanks again for everything.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Thats not a valid error code for mitsubishi.It should blink a series of blinks, for the first digit then pause very briefly then blink another series of blinks for the second digit.

Posted on Aug 11, 2008

  • Sonny Berry
    Sonny Berry Aug 11, 2008

    you will need to watch real close as it should blink a series of single blinks, then pause very briefly then blink another series of single blinks.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the dm board for ws-55511 located


The dm power board is the small board shown in the illustration below it has the 7 capacitors on it and its located inside the metal box on the far left side of the TV when looking in the rear cover. The metal box stands up vertically2_12_2013_9_52_00_am.jpg

Feb 12, 2013 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Mitsubishi WS-55311 55 In. Rear Projection Television will power on but won't stay on


When it shuts down have you tried accessing the self diagnosis feature to retreve the error code?If so whats the blink code your getting?

Feb 10, 2013 | Mitsubishi WS-55311 55" Rear Projection...

1 Answer

Dark pic on screen, unable to correct with regular means.


Regardless, my answer stands. It needs repair by a qualified technician. Rates vary by area. Make telephone inquires.

Jan 09, 2010 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Mitsubishi WS-55413 timer light flashing. tv will not power on


you have some caps that have failed in the dm module
that will have to be replaced to correct the problem
if your know how to change them and have the tools the caps can be obtained through most electroinc parts suppliers
there 1000mfd 16v we increase working voltage to 35WV
if you can change them let me know and i can give you locations on the board and the dm stands on the right side of chassis at rear

Oct 24, 2009 | Mitsubishi WS-55413 55" Rear Projection...

1 Answer

Mitsubishi WS-55819 TV Wont turn on.


code stands for loss of vertical. I had one of these if you can check pico fuses, check the ones on the main power board the one with the 2 convergence amps if any of them are blown then most likely the convergence amps have shorted out.

Aug 10, 2009 | Mitsubishi WS-55819 55" Rear Projection...

1 Answer

Ws-6580 error code 23


CODE / INDICATES
12 / No error has occured
21 / X-Ray Protect Shutdown
22 / Short Protect Shutdown
23 / Horizontal Deflection failure
24 / Vertical Deflection failure

Aug 06, 2009 | Mitsubishi WS-65809 65" Rear Projection...

1 Answer

I need master reset code for v-lock ws 65"


hi
menu > settings > security > change lock code > apply master code in place of lock code and press ok > enter new code what you want

Jan 23, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Mitsubishi HDTV 1080 WS-55859. Error Code 12


Did you push in the device and the menu buttons at the same time and get the error code...  I have the same problem and I get a 1,2 code....   I am looking for what the codes stand for...
Have you got any help on this....
Scott
mu email is smartin38@verizon.net

Sep 11, 2008 | Mitsubishi WS-55859 55" Rear Projection...

1 Answer

TV wont come on.


if your timer light wont stop blinking? on the vary left of the chassis. is the stand up module or as it is called the digtil module. there are 4 1000 uf caps at 35 volts the top of the caps will be swoling

May 28, 2007 | Mitsubishi WS-55513 55" Rear Projection...

Not finding what you are looking for?
Mitsubishi WS-55511 55" Rear Projection Television Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...