Every time i press graph on my ti 83 plus it says ERR:Window Range 1:Range how do i solve this problem so i can graph

Reset the windows dimension to defauts. Press ZOOM then 6:ZStandard.

There is no such error message from the TI 83PLUS. Did you mean WINDOW RANGE?
The easiest way to correct the messed up window dimensions is to reset them. You can press the Zoom button and select 6:ZStandard

Here is the link to post where I show several ways to draw a circle. If you do not have the conics applications download and instakk it on the calculator.
You can also use the cabri Jr application downloadable from education.ti.com. This application is dedicated to geometry.

I tried all possible situations where one would get an error ERR: ARCHIVED 1:QUIT 2:GOTO in relation to graphing, and I was unable to do so. Thus I cannot explain your error (in relation to graphing). I conclude that the error is unrelated to the graph.

As a general rule, one you get message ... 1:Quit, 2:GOTO press 2 and you will be shown the location where the offending symbol is.

Anyway, to graph functions, always deactivate the statistical plots

1. Press [2nd][Y=] to access (STATPLOT) then press [4:PlotsOff]
2. Command PlostOff echoes on main screen.
3. Press [ENTER], calculator answers Done.
4. Open the [Y=] editor to enter your function and
   
5. Press [GRAPH].
6. If you do not see any graph,

• press [ZOOM][6:ZStandard] or
  
• adjust the window dimensions by
  
• pressing [Zoom] and
  
• setting the Xmin,Xmax,Ymin,Ymax values
  
• making sure that Xmin is less than Xmax, and Ymin is less than Ymax.
  

There's something wrong with your window limits, for example Xmax < Xmin or Ymax < Ymin. Press WINDOW to bring up the window editor and examine the values, making sure there are no inconsistencies.

If you don't see anything wrong, post a comment here listing all of the entries in the window editor.

Press ZOOM and select Zoom standard (ZoomStd).
Alternatively, press the WINDOW key to access the window range setup
Set Xmin=-10
Xmax=10
Ymin=-10
Ymax=10
These are the standard dimensions of the window.
You can change the dimensions as long as Xmin is less then Xmax, and Ymin is less than Ymax. Do not make Xres close to Xmax-Xmin.

Press the 2nd key, then press the plus key then press 7, then 1, then 2. Your calculator will be reset and you should be able to graph the equation as long as y-intercept is between -10 and 10. If not, you'll need to change your window by typing in a new domain and range.

Try zoom 6

A problem exists with the window variables, for example Xmax < Xmin or Ymax < Ymin.

Press WINDOW to bring up the window editor and examine the values for any inconsistencies.

Simple:

Hit this sequence:

"ZOOM" "0"

That is for the "Zoom Fit" option. The calculator does not like the window you have for the equation you've given it. With this option, it will automatically give you the best fit in the window for the equation!