Question about Irons

2 Answers

Rowenta Steam generator dg5030 parts

Hi, I need a replacement trigger for inside the handle of above iron but can't get one through rowenta or the people listed on their site as they say I have to send in the entire iron as the tank comes as whole, the iron part comes as a whole part and something else. I know damn well someone somewhere has the parts that make up these whole parts but not sure who. Can anyone help? I did find one place who said they would take 4 weeks (from krups??) but lost their details.

Posted by on

  • judypeeler Sep 02, 2008

    I have the same problem. I'm getting ready to send mine in for repair unless

    you have located someone or have found the part to fix it.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

I spoke with smallappliances.com on 6/15/09 and the iron trigger is not available separately for this model yet. you have to buy the whole iron unit which is about 85.00

I've taken it apart and have the trigger switch out, i'm going to compare it to the switch for my other rowenta that is available and see if it is the same shape/size. I'll report back!

Posted on Jun 16, 2009

  • ocampo4396 Jul 14, 2011

    it is crazy to have to replace the entire iron unit for a $10.00 part. it is robbery. I will never buy another Rowenta Iron againg

  • ocampo4396 Jul 14, 2011

    I have the same problem with my 2nd Rowenta Steam iron, guess I did not learn with the 1st one DG980 . same issue the trigger button broke and was not able to replace it at that time, so I replace the iron with another version of a Rowenta steam Iron and same thing on this Iron DG5030 trigger knob has broke and called several place and they tell me I have to replace the entire unit.... Guess this is the only way Rowenta stays in business by robbing us..... I also will never buy another Rowenta Iron.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fix rowenta dg5030


Send it in for repair.
Google Rowenta Repair Center

Jul 22, 2014 | Rowenta DG5030 Iron

2 Answers

Rowenta iron dg3050 iron potion broken and will not hold steam can you replace the iron part


More than likely your steam valve is broken or stuck. I had one of these and they are worth having repaired. Google Rowenta Repair Center.

Jun 15, 2014 | Rowenta DG5030 Iron

1 Answer

Rowenta pressure iron and steamer model DG5030? We have purchased the iron and cord, now we need to assemble the part.


Google Rowenta and go to their website, they will have parts diagrams and wiring diagrams. Hope this helps, please post solved on fixya.com. So I get credit for a solved problem if it does.

Apr 30, 2014 | Irons

2 Answers

Steam comes out of the place where you put the water in


check the holes in the hot plate are not blocked with lime scale...sounds like you have a back pressure problem

Dec 29, 2012 | Rowenta DG5030 Iron

1 Answer

Do you know where I can buy the trigger knob for a rowenta steam iron model dg5030


Hi there.
You can buy parts for your steam iron at http://www.rowentausa.com
Regards.

Jul 14, 2011 | Irons

3 Answers

No steam. I pressed the steam button on the underside of iron handle and no staem.


There 's a leaked capacitor in the circuit board. You just have to replace it and it works again.

Please visit the following page for detailed instructions:
http://thechipfreak.blogspot.com

Jan 15, 2010 | Rowenta DG5030 Iron

1 Answer

Won't steam


I know it's a silly question but are you pressing the trigger in the handle? If you are then the solenoid valve may have failed

Nov 20, 2009 | Rowenta Steam Generator DG050 Iron

1 Answer

No steam comes out of iron


Hi, there is probably a something broken in the moulded plastic trigger assembly (there is a plastic broken finger that actuates a micro-switch under the rubber handle cover). If you are so inclined, use an orange stick and gently pry up the rubber handle cover on either side from the front to the rear cord end to access, inspect and troubleshoot. I am in SoCal and use the California Electric website to obtain parts or go to the Rowenta home website to locate useful manual information, PDF reader and dealer near you.

Jul 09, 2008 | Rowenta Steam Generator DG050 Iron

1 Answer

Steam trigger broke


i did some research for you and i found out the main web for Rowenta Usa and they do provide spare part as well.
You can also send the iron to a repair center near to you if under the warranty at no cost.
This is the information i got from them
http://www.rowentausa.com/rowenta/frame.aspx
Good Luck

Jun 17, 2008 | Rowenta DG5030 Iron

Not finding what you are looking for?
Irons Logo

Related Topics:

840 people viewed this question

Ask a Question

Usually answered in minutes!

Top Irons Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

kakima

Level 3 Expert

96467 Answers

Are you an Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...