How to connect wire less connection with my laptop,
Please Help Me: i am using the 3com router, it just disconnect and shows not Limited connection, Not connected, when i troubleshoot it shows acquiring network address. so how can I solve the problems and how can I connect the wireless internet? Please help me. Plz how to configure the connection and 3com wireless setup.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
limited connectivity means you didn't get an IP address. Is the router set to give addresses via DHCP, or is another PC doing that? Most common cause of this problem is wrong authentication (normally "open") or encryption type (WEP, WPA or WPA2). Pklease note that encryption keys can be set as HEX or ASCII, if they are HEX it will be only numbers 0 to 9 and letters A-F. ASCII can be anything.
first coonect your wifi router witjh your laptop with ether net then go to this link http://192.168.0.1 then type user :admin and password also admin or blank then go to dhcp then enbale it with auto . then disconnect your cable from laptop. then go to my network places then find wireless network then simply conect your network. thtas it.
you need to get into the routers settings (192.168.1.1 in your web browser) and look for DHCP, and enable it so as to give your pc's there automatic ip addresses, also check in the general settings if it's a modem router that you have got a internet connection from your ISP and all the dns and ip addresses are showing.
Go to the properties of each network card in network connections in your control panel and click on the TCP/IP line and click properties again and ensure obtain ip address automatically is selected and click ok.
Restart all pc's if neccasary and refresh your web browser when trying to get online.