Question about Projection Televisions

1 Answer

New lcd panel for LG 37 LB1DB - Projection Televisions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

If you are looking for a part number you need to get the LC370 number off the original panel on the back of the set if you go to one of the part distributors and type in that number it will cross you to a part number and price

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

From 1 to 10 ten been the best how good are this tv 55PP9363H/17 1 TOSHIBA 6211M15 1 SONY KFSOWE620 1 MAXENT MX26X3 1 SAMSUNG LN32BS40P8D 1 MAXENT MX26X3 1 MAXENT MX42XM11 1 SONY KDLS2VLISO...


The Samsung LN40B540P8F I would rate a 9. Only God is 10.

All the DLP sets, you can throw out

All the Older Projection sets you can throw out

I would take the rest for scrap parts.

I hope this is helpful.

Dec 18, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

37 INCH LCD MAGNAVOX TV WILL NOT TURN ON. MUST BE


This problems,very common in LCD tv,after the tv was in used about a year or two.The new technalogy LCD tv don't handle heat very well,not like the old CRT Tube Tvs.The power supply board tend to have bad capacitors componnents leakage,that bulges up it top or puff up gases escape,that why it take times or couples pushes to the power botton to turn the tv on.U know basic electronic's,and have soldering tools and solders?Take the tv aparts,check for these bad capacitors,that bulges,puff up in the power supply board and replaced them,than ur power will work normal again.Or tries Websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Apr 29, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I have a Phillips LCD tv model #42PF7421D/37. and


I know on the plasma TV's it was a matter of updating or downloading and re-installing the firmware/software for the TV to fix the issue. Go to the following page and if the model you have is indeed a 42PF7421D/37 download the software on the page. Make sure you follow the installation instructions to update the software otherwise the set will become a 150 lb paper weight.

&scy=US&slg=AEN&sct=LCD_TV_SU&cat=TV_CA&grp=SOUND_AND_VISION_GR&session=20091111140139_64.85.227.44&ctn=42PF7421D/37&mid=Link_Software&hlt=Link_Software">Philips Support Page

Nov 11, 2009 | Projection Televisions

1 Answer

LG REAR PROJECTION TV DARK SCREEN PROBLEM


very possible unit has bad optical engine .May not be worth repairing.Optical engine is complete unit that includes lamp,LCD panels, fans,optics and other parts.They come complete and cost about 3-6 hundred dollars ..thanks

Jul 30, 2009 | LG 62SX4D 62" Television

1 Answer

Codes for my fios remote do not work on my new tv. it's a new emerson 32in lcd hdtv


Emerson Codes 004,006,012,023,024,025,026,027,028,029,030,031,032,033,034,035,036-37-38 039 041 042-043-044-046-047-123-124-162-171-179-191-196-208

Dec 12, 2008 | Projection Televisions

1 Answer

My 8 yr old daughter thru the remote and broke the screen on my 32in LG lcd tv. All black now, looks like broken glass on left side. Can it be repaired for less than new?


your lcd panel is bad most of the time that is the most expensive part on the tv. cost on a 32inch lcd panel is 650.00 not including labor . this lg panel is not aviable now.sorry.


thanks doctor video leadng edge electronics since 1987

May 11, 2008 | Projection Televisions

1 Answer

No sound from Phillips 37 LCD


The audio output IC is probably faulty this cost only a few dollars if you replace it your self.Let me know if you need further assistance or more information.

Mar 30, 2008 | Projection Televisions

1 Answer

Lg 37 inch lcd has a dark shadow vertical line down left side of screen about 1cm wide and does not seem to go right to the top or bottom and is slightly wavey


reseat the LVDS cable inside the set. this is the multi wired connector that connects the main board to the panel. if that doesn;t solve your problem replace the main board. if you turn off the set and you can still see it in the screen it is the panel.

Feb 14, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...