Question about Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver

1 Answer

HAMMER MODE SLIPS OUT

WHEN I PUT THE DRILL INTO HAMMER MODE IT SLIPS INTO A NEUTRAL MODE ,BETWEEN HAMMER AND DRILL ICON

Posted by on

  • Anonymous Mar 18, 2014

    ARMATURE FAULTY

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 313 Answers

I am guessing the transmission problem not enough tension to the clutch

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I put a Dewalt DC988 hammer/drill in hammer mode?


turn the selector lever from hammer / drill to hammer
it is a second lever close to the gear box of the drill

Sep 17, 2016 | Dewalt Drills & Drill/Drivers

1 Answer

Drill slips when in forward drill mode, sounds like a gear is grinding on another gear. Does not slip in reverse or in hammer mode.


Dewalt XRP drill gearbox - YouTube

? 3:16
https://www.youtube.com/watch?v=s262yXyUYD4
Nov 23, 2011 - Uploaded by Ultimate Handyman
This is extremely useful if the gearbox on your drill is damage... ... i was using my dewalt hammer drill in the drill mode and suddenly got slower i though the battery was running out. as i ...Looking forward to the repair video.

Nov 22, 2015 | Drills & Drill/Drivers

1 Answer

Dewalt hammer drill chuck won't turn model DCD985


Make sure the speed selector lever on the top of the tool is all the way in gear, and the dial selector on the tool is in drill or hammer drill mode. If in screw mode make sure it's set to a level that it won't "clutch" out.

Feb 17, 2015 | Dewalt Drills & Drill/Drivers

1 Answer

Can't engage drill or hammer settings on de walt dc 925 xrp


Try turning the ring to 2 or 3 and run the drill holding the chuck so the clutch slips then try turning it to drill setting. Also try to do it in different speed settings. If not it sounds like a fault in the gear module. It might just be a metal clip just under the clip in side. Undo the 4 screws holding the gearbox onto the housing and carefully remove it, you might see the fault or loads of dirt that needs cleaning. Go to http://www.2helpu.com/world/map.aspx for a drawing.

Jun 01, 2012 | Dewalt 18v Battery Hammer Drill Dcd950...

1 Answer

Clutch slips reguardless of setting, in both drill and hammer mode. won't drill. is this a transmittion problem?


You can get the part replaced with metal gearing and clutch and that shouldn't happen again, but the cost may not be worth it

Mar 08, 2011 | Dewalt 18v Battery Hammer Drill Dcd950...

1 Answer

My dewalt slips bad in the drill mode whiile i am drilling in hard material the drill slips real bad and it also does it in the hammer mode. Is that normal


Check the speed selector switch. if it is not fully engaged (usually because of dirt) the gears will slip. cycle the switch a few times.

May 21, 2010 | Dewalt DC920KA Heavy Duty Xrp 18V Cordless...

1 Answer

Hammer-mode engagement


there should be a slider type switch on top of the drill. and there will be a picture of a hammer, and a picture of a drill. slide accross to the drill picture for drill, and hammer for the hammer drill

Apr 07, 2010 | Dewalt 18 Volt Compact Drill Kit

1 Answer

Dewalt dw567


if i'm confused i'm sorry, but don't confuse and impact driver with a hammer drill

2 different tools altogether

Feb 27, 2010 | Dewalt DW056 18 Volt Cordless Impact...

1 Answer

3rd gear slips AGAIN!


A gear needs replacement.
Most likely the speed change ring.
It's a known defect on these drills.

Jul 05, 2009 | Makita Tools 18V 1/2" Lxt Lithium - Ion...

1 Answer

Makita 8444d mxt drill


what is the setting in your clutch. if you set the clutch to the highest setting and it`s still slipping then you need transmission assy.

May 28, 2008 | Makita 18V LXT Lithium - Ion Cordless...

Not finding what you are looking for?
Dewalt DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dewalt Drills & Drill/Drivers Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Jim Thurston

Level 3 Expert

669 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Are you a Dewalt Drill and Drill/Driver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...