Question about Panasonic PT-51HX41 51" Rear Projection Television

1 Answer

Blue waves My TV just started showing blue waves (lower 1/3 of screen) and the color has more blue then any other color. Text is doubled with the color blue. Is it worth fixing as the TV is 6 years old and how much roughly would it cost to fix.

Posted by on

  • emcquat Sep 11, 2008

    I have a cinvergence problem and cannot get the blue projection to line up on the screen to adjust with 8 cross-hair areas. This occurred after an unexpected power outage in our neighborhood

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 132 Answers

You need convergence circuit repair. The cost depends on where you live and who you call.

In Calgary, Canada typical TV shops want $300 to $650 for convergence repair. They will include cabinet damage and wall scratches for free.

It is a difficult technical repair to attempt as a rookie tech. It is even more difficult if alignment is required or any secondary problems are encountered. If you have no tools, no experience soldering or doing electronic repair; you may end up with scrap or paying a high price for someone to fix after your attempt to repair.

easyab

Posted on Aug 27, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi 53udx10b screen is dark, very blue and red. there is a red wave across the top of the screen. there is a blue "ghosting" of any text on screen.


The tv have a problems known as a convergence picture problems,it is dead.Tv set have any colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes,than the tv convergence board it is dead to causes all these problems.Now the tv set convergence board must have to be repair like replacing 2 STK convergence ICS and some or all of it resistors too.To fixed the tv set convergence board to solved the tv set convergence pictures promblems.The tvs shops will cost u like $300-350 for parts and labors.

Aug 18, 2011 | Hitachi 43UWX10B 43" Rear Projection...

2 Answers

Projection HDTV Pansonic 47" Curving blue and green colors on top and bottom of screen.


You will need to replace your two convergence I.C.s.They are two large IC mounted on a large aluminum heat sink.Replace both,look for any burned resistors near them,replace those if needed,and readjust your convergence. Good Luck

Let me know if you need any further help

Mar 29, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

There is blue yellow color blur on the screen with cable or dvd


Hi,
This problem is of "CONVERGENCE". You have to replace the convergence IC's which is better to buy a new one TV, Just contact any expert and replace the convergence IC's and your TV work fine again you need not to buy a new TV.
Thanks for using fixya.

Jul 24, 2009 | Toshiba 42H81 42" Rear Projection...

3 Answers

Our 1991 RCA projection TV P52150CP started being hazy blue when first turned on then it gradually would become mostly normal screen. Today the whole screen is a blue haze. You can see the picture sort of...


Most likely it is the Blue CRT Driver Board or the Blue CRT failing. There is no quick way to varify unless you call a repairman out to see.
Hope this Helps,
Skyassoc

Jul 03, 2009 | RCA P52926 52" Rear Projection Television

2 Answers

Funny colores and shades on my Toshiba projection TV


the convergence tube is the faulty part in this case a new convergence tubes replacing is required.

Jan 30, 2009 | Toshiba 42H81 42" Rear Projection...

1 Answer

Blue wave across screen


Just click below for convergence repair kit;

http://servicemanuals.vstore.ca/

Double images and colors are blurry .Blue,red and yellow wave coming up from the bottom of the screen on the lower left symptom is for busted convergence IC,you must replaced this IC in order that will works better again.STK 392-xxx ICs and it's associated resistor,this resistor automatically change value,can caused truoble even though you change the ICs.If you bring this to a service center they cost you $600 to $700,but if you buy the repair kit you can save more,don't wory it is very easy because there is intallation guide including in the repair kit. Feel free to ask whatever the result... click the link for sample picture guide step by step installation;

Hope this may help;

Regards,
VOTIT

Sep 08, 2008 | Apex Digital GB5108 51" Rear Projection...

2 Answers

Rainbow on the screen


Do you have any larger speakers close to you tv. Or any magnets been neer it. If you unplug it for a while the tv should have remove the rainbow

Aug 28, 2008 | Panasonic PT-53TW53 53" Rear Projection...

Not finding what you are looking for?
Panasonic PT-51HX41 51" Rear Projection Television Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4872 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...