Question about Whirlpool GSC9455 Top Load Washer

1 Answer

Washer will not drain after wash cycle or the spin cycle

My speed queen washer stops after the wash cycle, will not drain. Timer control keeps running and than it goes into a spin cycle with water in the washer. As the water swirls around it eventually gets pumped out and the spin is normal. Same happens after the rinse cycle. Any help would be appreciated

Posted by on

  • Anonymous Mar 19, 2014

    washer goes through cycle, apparently all water is out, but pump keeps running

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 172 Answers

Check to see if your pump is slightly plugged with a sock or ?

Your top loader should pump out in about a minute and a half when totally full of water.

Posted on Aug 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cold water won't stop before rinse cycle


if it fails to stop running only at the rinse part of the cycle it is probably in the timer as the solenoid valve has to cut the water off when the washer fills for the wash cycle too. fills for wash cycle and cuts off water, washes and drains, refills for rinse cycle and water just keeps running? does this every time you run it? that's in the timer. bad solenoid (water inlet valve) would keep running even on wash fill up. hope this helps.

Feb 25, 2014 | LG WM2688H Front Load Washer

1 Answer

Coin-operated Speed Queen washer: Model swtt21wn


speed queen double front load washer spinning without stop,please give some idea,thanks alot

Feb 21, 2011 | Speed Queen SWT921 Top Load Washer

1 Answer

The washer quits at rinse and spin dry cycle


I've had the same experience with my Speed Queen washer. Approached the accredited Speed Queen agents for assistance, when tech support was deployed to diagnose the problem.
In the end, I was told that the "timer" went bust. So the wash cycle seems to work 100%, but when it comes to rinse and spin the contacts on the timer don't make contact, and the motor waits in anticipation for it's next command, and that the high pitch noise heard.

Jul 04, 2009 | Speed Queen AWS52NW Top Load Washer

1 Answer

SPEED QUEEN TOP LOAD WASHER HA4011W. Motor trips at SPIN start


I would call whoever repaired the washer back out and have them diagnose.

Jan 23, 2009 | Speed Queen AWS52NW Top Load Washer

1 Answer

28+ year old- Speed Queen Heavy Duty top loader


It sound like you drain hose is siphoning off the rinse water, It needs a standpipe make sure the drain hose is at about the height of the top of the washer, Make sure the drain hose isnt stuck in the drain it also needs an air cap. the drain hose should not lay on the floor to run to the drain

Please let me know if this doesnt solve your problems

Aug 31, 2008 | Speed Queen AWS52NW Top Load Washer

2 Answers

GE Adora front load washer overloaded now won't start


Washers - Resetting Electronic Controls on a Washer

If there is a pause in the washer cycle, the controls will lock up. The pause can occur because of a power failure or it was put in the test mode at the factory.

Also, if the washer was stopped before the cycle was complete or the consumer has pushed the stop/pause button to temporarily stop the cycle and the cycle is not reset. Over a period of 24 hours, the washer will pump out and spin, but will stay in the final spin.

To correct the situation, shut off the circuit breaker for 30 seconds or unplug the washer, then turn the timer knob around and back to any position other than final spin. Verify the water is turned on and restore power. This should resolve the issue.

Apr 23, 2008 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
Whirlpool GSC9455 Top Load Washer Logo

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...