Question about Televison & Video

3 Answers

Emprex me1 media player firmware update

Hi,downloaded firmware to update media player timer function.read me said unzip to pendrive and plug in usb an restart player.system comes up loading but ignores pendrive an boots up without updating.lite on usb stik low.have tried plugging external hardrive in using usb with same update on it in case not enougth power no result.any clues plz?

Posted by on

  • labratone Aug 16, 2008


    Shut your hole you slaaaaaaag

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The USB pen has to be FAT32 and all the files from the zip have to be in th root directory of the pen drive

Posted on Dec 29, 2008

Unplug your Emprex with the USB plugged into it, then while holding down the power button plug the emprex back in, keep holding the power button down until the screen changes from loading to the updating page, usually you have to hold the power button down for a around 15 seconds then the update starts, once it starts updating let go off the power buton and let it do its thing

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

COBY MP3, MP610-4G, NOT WORKING. SCREEN READS, "FILE SYS ERR"


Updating the firmware should be done for this type of error: For PDF instruction you could download this by doing below: 1. Go to http://cobyusa.com 2. In the right side of the page type MP610 and hit Enter 3. Click MP610 Firmware Update for File Sys Error 4.Unzip file and read the procedure
If you have no time to download pls perform the ff: File Sys Error This is a system firmware update. This update will fix the "File Sys Error" message and restore the MP3 player back to the factory settings. The firmware update file can be downloaded at www.cobyusa.com. Important This procedure will delete all contents on the MP3 player. Please make sure that you back up all your documents before proceeding with the firmware update. To backup all contents on the MP3 player, simply connect the MP3 player to your computer. The MP3 player will be listed under "MY Computer "as a removable disk. Double-Click on the removable disk and copy and paste all the folders/files on your desktop.
Firmware Update Procedure Do not have any USB Devices connected to the computer including the mp3 player. - Download the firmware file from our web site. The file will automatically run itself once it is done downloading. The below screen will appear. Do the Following: 1- Connect the MP3 player to your computer. It will show up in the number one box in the firmware update software.The windows explorer bar will also pop up when you connect the mp3 player to the computer. Simply close the explorer bar. 2- Once the MP3 player shows up on the number one box, click on the "Firmware Feature" icon to start the firmware update. 3- After the firmware update has been completed, you will receive a check mark in the firmware number one box. Disconnect the mp3 player from the computer. Close the firmware update software. Turn the MP3 player on. If the mp3 player reads Coby, then the firmware update is successful. Use Windows Media Player to transfer your music files in the mp3 player. This will restore the Artist, Albums..etc selections in the Music menu. If you have a problem with this device, please read the troubleshooting guide on the user manual or visit us on the web at www.cobyusa.com for Frequently Asked Questions (FAQs). If these resources do not resolve the problem, please contact Technical Support. Phone: 800-727-3592 Weekdays 8:00AM-9:00PM EST Weekends 9:00AM-5:30PM EST Weekdays 8:00AM-5:30PM EST

Feb 18, 2011 | Audio Players & Recorders

1 Answer

PLAYER UPDATE REQUIERD !!! PLEASE REFER TO THE MANUAL


Hello,

All online support for iRiver players is on next site:
http://www.iriverinc.com/lounge/loungeList.asp
note
If you enter an unreadable page: return to / start from the support site above.

Download of the manual
>
select a category: Manual
select a product: E10
click GO
select: User Manual of E10
Click the zip file in the language you prefer: English.zip for English .
Unzip the file after the download with Winzip or Winrar, to see the PDF file that can be read with Adobe Reader.
<
Upgrade using iRiver PLUS3 = Download and run iplus3.exe for matching the software on your computer and the firmware on the player
>
In page top of the support site: click Plus3
Click the Overview | Function | Download to see what Plus3 is and how it works.
Click Download irver PLUS3 to directly start the installation of this program onto your computer
<
Update the firmware = Download the firmware and run the firmware updater
for putting new firmware into the player
>
select a category: Firmware
select a product: E10
click GO
select: New Firmware of E10
Download the updater zip file
Unzip the firmware updater with Winzip or Winrar and run the execute file to start iriver Firmware Updater: follow the steps.
After a firmware update always run the Plus3 upgrade: to have the correct software on your computer that communicates with the player's
firmware
<

Aug 01, 2010 | iRiver E10 Digital Media Player

1 Answer

My coby 2 gb says file system err when I turn it on...so scrolling down to all app..music.. photo ..movie ..fm radio.. e book...everything i scroll to sez file sys err...HELP


Hello,
There's a firmware update for File Sys Error for the MP610.
Go to the support site:
http://www.cobyusa.com/?p=support

Enter MP610 in the Product Search bar: All support for this player shows up.
Select and download the Firmware Update. After the download unzip the file and read the pdf file for instructions to solve the display malfunction.

Apr 30, 2010 | Coby MP-610 MP3 Player

1 Answer

Firmware Update problem.(Failed) hi i have Creative Zen 4GB Mp3 player. When i plug it via USB on my PC i can't upgrade frimware.&#304;t always run in recovery mode.i start firmware upgrade and...


Firmware Update problem.(Failed)
hi i have Creative Zen 4GB Mp3 player.
When i plug it via USB on my PC i can't upgrade frimware.&#304;t always run in recovery mode.i start firmware upgrade and installer says "firmware upgrade failed.".Media explorer says Storage Media is 50 mb.Please help i don't know anything to repair it...

Feb 21, 2010 | Creative Labs Zen Digital Media Player

2 Answers

The PC will no longer recognize it. I've tried downloading the driver from the sansa website and manually attempting to fix it will no vail


Hello,

Support for the Sansa Clip support information is on next site:
http://kb.sandisk.com/app/answers/detail/a_id/4303/kw/clip/r_id/101834

Correct link for updating the Clip's firmware:
http://kb.sandisk.com/app/answers/detail/a_id/300/related/1


When MANUALLY installing firmware:
Check the version of your player to have the matching firmware download for the player, as described in the updating firmware link.

Going to the Sandisk forum site for the Clip firmware download:
http://forums.sandisk.com/sansa/board/message?board.id=clip&thread.id=15109
Note: read the instructions how to perform the firmware update.
1. Choose the correct version for the player.
2. Connection mode in Windows should be automatic, when not recognized in Windows or with MAC and Linux use MSC mode ***** .
3. Extract the zip file on the computer first.
4. Next put the unzipped file on the player in the root directory.
5. Disconnect the player.
6. Restart the player: the firmware update should restart now.

*****Note:
Switching to MSC mode for Sansa Clip:

Method 1: through the menu
1. From the Main Menu, select Settings > USB Mode.
2. Select Auto Detect, MTP or MSC.
Method 2: forcing, using the buttons / switches
1. Turn device OFF.
2. Slide the Hold switch down to Lock (orange color showing).
3. Press and hold the center button while connecting the device to the PC.

Need more help ? Just post a comment.

Dec 14, 2009 | SanDisk Sansa Clip MP3 Player

1 Answer

How do i download software so computer will read my device


hi : inzee here
first u check your dvice to connect your pc if the dvice is not shown on your pc so the problem is still that means your dvice is not working any where i mean you connect your pc or power on your dvice that means your dvise has need a current firmware. so go on samsung site and search your firmware by your dvice model download your current firmware and instal his setup to your pc after instal connect your mp3 on pc usb remember that b4 u connect the player is powerd off after u connect open the firmware setup thats u download the site and click to start button the firmware updater to look your dvice and update the firmware automatically thats it.

Dec 04, 2009 | Samsung YP-U2X Digital Media Player

2 Answers

No USB mode in Settings menu c250


Updating firmware video
http://www.youtube.com/watch?v=kVLoG4FWEjc

Jan 22, 2009 | SanDisk Sansa c250 (2 GB) MP3 Player...

1 Answer

Worked first then boot error now comp wont pick it up


Hi, you can try to upgrade the player's firmware, you can download it from the RCA Website (moz-screenshot.jpgmoz-screenshot-1.jpghttp://support.rcaaudiovideo.com/downloads.aspx?product=187), the firmware it's the second app listed.
If your computer doesn't recognize the player, you'll have to turn it off and keep "PLAY" pressed for 10 seconds while connecting it to the USB port, then update the firmware.

Jan 31, 2008 | RCA OPAL M4001 MP3 Player

2 Answers

Cannot transfer files


go to http://www.iriver.com/support/down_view.asp?searchProductIdx=73&searchCategoryIdx=1&searchString=new+firmware&page=1&idx=844&tmpSearchProductIdx=&tmpSearchCategoryIdx=&tmpSearchString=

download the updater. unzip the file and run the installation program. after you have install the iriver firmware updater, run the program. it will automatically detect what you need. follow the instructions. if the updater stops at 50% don't worry. wait bout a min or 2 then unplug your T30 and it will update by itself

Dec 07, 2007 | iRiver T30 MP3 Player

2 Answers

Firmware Update::Memorex MMP8565


They're talking about the folder saved on your desktop that you downloaded. It should be something with the name of the player in it. You double click on that folder, and it has setup.exe inside it, and you double click on that. What site did you get the firmware update from?

Sep 17, 2007 | Memorex MMP8565 MP3 Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,756 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73451 Answers

Cindy Wells

Level 3 Expert

5019 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...