There is problem in opening of my notebook there is black screen appeared followed by blue instruction.It happens after my boardmate used it simultaneously without cooling fan ,I can only use it by safe mode f8 with black background.Do you think I need to change the hardisk of it?

Hi! and welcome to Fixya!

It looks like your tv is unable to handle the output video resolution from your bluray. The reason why you do not have picture on the tv screen after the bluray disc logo appears.

You can follow the instruction below to set the video resolution on your player to its lowest resolution:

1. Using your bluray remote control, press the following buttons in order... STOP button (press and release) ....HOME button (press and release)....POP UP/MENU button ( press and release )
Note: press the buttons in order with 1 second interval. Make sure tv and bluray are ON when you try this. If first attempt nothing happens, try this again.

2. When the home menu screen appears after doing the above instruction, you can set the video resolution again manually. Follow the instruction:
Using the BD remote control press HOME button > then go to SETUP > select screen settings > then change OUTPUT VIDEO RESOLUTION to Auto > change also 24P OUT to 1080P // set the BD-ROM 24P OUTPUT to Auto

The next time you turn on the bluray player you will have picture again.

Let me know if this works!

Maybe this will help: http://pcsupport.about.com/od/fixtheproblem/ht/stoperrors.htm

Hi, If you can, try turning up the brightness on the screen. Also if you have a power adapter plug that in and see what happens. It could be you need a new battery. Good luck.

try this...

turn on the laptop,,,
keep pressing F8
a menu screen will appear,, select SAFE MODE using the cursor keys and hit enter,,
once it boots in safe mode click no to use system restore..
follow the onscreen instructions to send it back to a date when it did work,,
it will shut it self down and restart in a propper manner..

if that fails,,

when u turn on the laptop it displays a menu,, it shows to press a certin key to enter system recovery,, press that key,,
follow the onscreen instructions to restor the laptop to factory condition..

The best solution will be to reinstall your widows xp (completely formate your pc)

Ok, at bootup, press F8, choose Boot up in safe Mode, when next window comes up, it ask if you want to go to desktop OR System restore, Choose system restore. now when next window, like a calender comes up, simply choose a date BEFORE you had problems, follow instructions, and it will reboot,this should get you back to working.

hello
Try this

To Select Last Good Known Configuration and manually install the new driver:
Approximate Troubleshooting time: 5-8 minutes
Reboot the PC and press F8 at startup
Select Last Known Good and let the PC boot
Browse to: C:\Drivers\System\UTLIntelMatrixStorageMgr3\
Run iata86enu.exe and follow the instructions (next, next…)
In the event you get pop-ups that the installer cannot find a particular file, hit the Browse button and point to the directory:
C:\Program Files\Intel\Intel Matrix Storage Manager\Drivers\
At the end of the install, accept the option to reboot.
Login to the PC and verify the new driver installed.
Open Device Manager and look for the Intel SATA controller (the name will vary between models)
Open the device.
Go to the Driver Tab (at the top). Click Driver Details.
Verify that iaStor.sys is now version 8.6.0.1007

This has happened to my computer twice, the computer starts up but nothing appears on the screen. Both times it was a corrupted BIOS that needed to be updated - if you follow the instructions here it is a simple fix. If it is too complicated then point out the link to a techie friend and get them to do it for you:
http://eric.chromick.com/aa1/aspire-one-black-screen-of-death/

this is all happen to not properly shut down, if your read the problem from blue screen so we can identify it give you some instruction how to fix it. YOu know only one can repair this is a computer technician or expert.. but i think you don't have so maybe your the one going to do it, here's is a instruction: 1. Put a Bootable System Disk XP or Vista or etc. 2. Make a Bootable Disk run before the system comes up... 3. Follow the procedure which appear on the screen... then so on.

Go to Messenger at the top left and click on it.
Next go down to Preferences and click on it.
Next Calling and Devices on the right and
set the Microphone and Speakers to the computer Audio Card.
Next go to the Test Audio section and in blue writing click
on “Open the call setup assistant” and follow the instructions
on the left window.
LET ME KNOW IF THIS HELPED AND PLEASE RATE ME