Whirpool cabrio washer starts spinning before washing

It could be caused by spikes in power or if the load is not balanced or there is an interuption in power.

Defective bearings in the washer tube.

http://whirlpool.manymanuals.com/

Whirpool - Washers sections - cabrio washers.
I guess you can find user manual there.

The washer tub bearing is defective.

Lid switch needs to be replaced.

Cabrio page 66 F-1 control failure replace main control

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

What the heck is an F 50 error? I keep getting it and it acts like it will start and then goes to the error message Help! I need to do the wash!

I just paid $85.00 for a tech to come out and pull some socks out that got stuck between washer drum and outside plastic drum. It took 10 mins. top.
It seems when you pull clothes out of washer small items slip between inner and outer drums. BAD DESIGN.

You can check the drain or the filter. You will have to pull it out of the space it is now to access it. Items will get stuck in the drain clogging it.