Question about Pioneer AVIC-N1 Car DVD Player

2 Answers

It does Power on but with no viedo, no sound, no gps...

Hi there!!!
I just installed my avic n1 system to my car. It does power on but there is no veido, audio!! the screen just goes back in to the unit right after it comes out. I went to the readio shack and they told me there might be some mirochip problem inside the unit and needed to send back to the factory.

I am pretty sure that all the wires connected correctly (I paid $200 for a professional installation). I had already bought a new set of wire and stuff for the system...and I really don;t want pay another $200 (this is what the factory quote for the repair) to send it back to the factory again////
so guys..please help me out !!!!

Thanks

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Please remove the unit from the dash wait for 30 min and then connect it back power on the unit and check if it works.....or there could be a broken ribbon cable which is causing the problem if the player is within warranty get it repaired by the company.....
Please use this link for company support:

http://www.pioneerelectronics.com/PUSA/Support/Navigation/In-Dash/ci.AVIC-N1.Support





Good luck....

Posted on Aug 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Initially, pls try a reset. The reset button is recessed button a tiny hole on the face plate above the right knob.

Alternately, seek the services of third party repair, for a start, try eBay.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards. Thank you for using FixYa.

Posted on Aug 11, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power


yeah check your fuse box for your radio some dvd player even have a black box on the wiring on the back that has the glass tube fuses hope this was helpful

May 10, 2010 | Pioneer AVIC-N1 Car DVD Player

1 Answer

What wires power up my pioneer av1 indash


ther should be a yellow cable and a red cable join those to the positive terminal ,and the blck cable to the nagative terminal .

Apr 21, 2010 | Pioneer AVIC-N1 Car DVD Player

1 Answer

Pioneer AVIC-N1 won't load the GPS discs. Say


CLEAN DRIVE WITH A DISC CLEANER. ALSO TRY A MASTER RESET. FOUND ON FRONT PANEL SMALL HOLE FOR A PAPER CLIP.

Oct 22, 2009 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

1 Answer

Mute function on Pioneer AVIC-N1


You have to isolate yellow-black cabel. This cabel was in contact with earth and it was the reason, why you have Mute on the display.

Apr 14, 2009 | Pioneer AVIC-N1 Car DVD Player

3 Answers

Display not working


just got a tech bulletin from pioneer in my bulk mail(almost trashed it). they said its a recall on all avicn1 and 2's. the ribbon wire going from unit to screen fails after many cycles. they are issuing free repair.

Notice: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 To: January 3, 2007 Dear Valued Customer: Re: Upgraded Flex-Cable for Flip Screen in Navigation Models AVIC-N1 and AVIC-N2 We would like to inform you of a potential service issue with Pioneer's AVIC-N1 and AVIC-N2, inform you of our plans to resolve this service issue, and ask for your help in notifying consumers. If a consumer is not experiencing any issues currently, there is no need for the consumer to take immediate action because the one-time fix to resolve the service issue will be available if an AVIC-N1 and AVIC-N2 later experiences the service issue. _Importantly, the service issue does not pose any health or safety risk._ Pioneer is aware of a potential issue with the flex-cable powering the flip screen to the AVIC-N1 and the AVIC-N2. After a number of power cycles, the cable has been observed to fail and cause the unit to malfunction (symptoms may include, but are not limited to, the flip-screen becoming blank) -- flex-cable failure can only be confirmed by Pioneer; standard service charges may apply for service issues not related to the flex-cable upgrade. This issue may affect almost all AVIC-N1 units and AVIC-N2 units. Please contact Pioneer at the number listed below if you have a question about whether your AVIC-N1 or AVIC-N2 unit is affected by this issue, or if a specific malfunction affecting your AVCI-N1 or AVIC-N2 is related to this issue. To address this issue, Pioneer is providing a one-time cable upgrade to consumers for their AVIC-N1 and AVIC-N2 at no charge to consumers for parts and labor. Pioneer will offer the free upgrade either upon request or automatically if an affected unit is serviced for another reason. Pioneer will exclusively perform the free cable upgrade for all units (i.e., no other service facility should perform the cable upgrade). If you own an AVIC-N1 or AVIC-N2 and you are experiencing the service issue, please contact Pioneer Customer Service toll free at 800-421-1603 to arrange for the cable upgrade. Pioneer service representatives are available Monday through Friday, 9:00 a.m. to 7:30 p.m. (Eastern Time). Customers who have paid for the cable upgrade are eligible for reimbursement of certain service costs if sufficient proof of service can be provided -- please contact Pioneer at the above-listed phone number for more information regarding reimbursement rules. Customers can also review FAQs regarding this service issue. Click here to view the FAQs. We sincerely apologize for any inconvenience this service issue may cause you, and we thank you for your cooperation and continued support of Pioneer. Sincerely, Pioneer Electronics (USA) Inc. *Pioneer Electronics (USA) Inc., 2265 East 220th Street, Long Beach, CA 90810* ------------------------------------------------------------------------
___________________________________________
owner of
Motion Marine & Car Audio
the florida keys

Dec 08, 2008 | Pioneer AVIC-N1 In-Dash DVD Multimedia AV...

2 Answers

Memory Navi mode


Hi vsudude,
You have to go back to the menu and reset. Youcan take the help of owners mannual supllied along with the unit.

ramesh22

Jun 07, 2008 | Pioneer AVIC-N1 Car DVD Player

2 Answers

Avic n1 dvd is not working properly


Is it always blank? Or only when trying to watch a DVD? What version discs are running?

Apr 08, 2008 | Pioneer AVIC-N1 Car DVD Player

1 Answer

AVIC-N2 AM fm radio XM radio Backup camera


Check the connections at your brain, you probably pull it loose when you removed the N1. Goodluck.

Mar 24, 2008 | Pioneer AVIC-N2 Car DVD Player

Not finding what you are looking for?
Pioneer AVIC-N1 Car DVD Player Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Video Players Experts

The Knight
The Knight

Level 3 Expert

68223 Answers

Craig Sagar

Level 1 Expert

11 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Are you a Pioneer Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...