Question about Plantronics - Bluetooth Headset Plus Base & Headset

8 Answers

220 Plantronics bluetooth instructions

Hi,
I have the above headset but I need to link it to my new cell phone and I have misplaced the instructions? Is this something you can help me with? I have my new phone and headset with me.

Posted by on

  • 2 more comments 
  • King of all Aug 30, 2008

    I used my headset once...on the way home from Radio Shack. Never been able to turn it on again. Tried the previous recommendation. I've misplaced instructions too (if I ever received them). The tech set it up and never worked again. Can't get any light to come on. Is there a battery that I might be able to locate in the device?



    Bruce

  • Anonymous Oct 13, 2008

    same

  • jblum102 Dec 30, 2008

    I am trying to pair my plantronics headset to my blackberry and it is asking for a passkey. I threw out directions and am not sure what the passkey is? Any insight would be helpful.

    Thanks,
    Julie


  • Anonymous Mar 04, 2009

    it says i need somekine of pair number.

×

Ad

8 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

  • Expert
  • 2 Answers

To pair your Plantronics headset with your phone. Enable blue tooth on phone, push power button on headset and hold (make it flash between blue and red). You then have 2 or 3 minutes to type in the 0000 passcode to sink them. It really does work (tech support from Plantronics told me how to do this).

Posted on Jun 25, 2009

  • Omegamaximus Nov 22, 2010

    this really does work .... thank you sooo much =D YAY

  • timkay Jan 02, 2011

    Fantastic! it works, Cheers!!!

×

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

Begin with the headset turned off. Press and hold down the silver call control button in for 6-10 seconds. The light will flash blue first. Continue to hold the button down then release the button when the indicator light starts flashing red then blue.

Posted on Aug 29, 2008

  • talathian Apr 20, 2011

    Passcode from factory is all 0's

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Most devices use a standard code of 0000. I had the same problem with my blackberry requesting the code and this solved it.

Posted on Apr 27, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Here is the user guide for that model :)

http://www.plantronics.com/media/media_resources/literature/user_guides/explorer220_ug_en_es_fr_pt.pdf




Posted on Jun 18, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can't get my ear piece to connect with my pc via bluetooth. can anyone tell me how to do this?

Posted on Feb 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My samsung mobile GT-C3053, how canconnect my mobile with plantronics220

Posted on Aug 22, 2010

  • rycm Nov 23, 2010

    YES use 0000 as pass code and it works, after holding down power button on front from off position turn on for 7-10 sec. till it flashes red and blue.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I can progame it to my phone no manual

Posted on Jan 07, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

12-05-2010 I am trying to pair my plantronics headset to my nokia n 72 and it is asking for a passkey. I threw out directions and am not sure what the passkey is? Any insight would be helpful. pls send my email id bansiwaldinesh@yahoo.com

Posted on May 12, 2010

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

micromaster
  • 3614 Answers

SOURCE: 220 Plantronics bluetooth instructions

PLANTRONICS EXPLORER 220

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: 220 Plantronics bluetooth instructions

Start with the device off but fully charged. Press and hold the call control button for 8 seconds; at this point, you'll see the light flash blue then red. You'll have two minutes to connect it to your new phone. Use the passkey 0000 after your phone finds the headset.

Posted on Apr 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My new phone a Samsung Gusto is not pairing to my Plantronics 233 bluetooth? Is it compatible?


Hi, to be sure if the blue tooth wll be compactible with Samsung Gusto, you will need to use the below instructions first after trying out the instruction and still does not work,that means it's not compactible with it.

instruction:

Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.


Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.

Good luck..

Feb 23, 2011 | Plantronics Explorer 230 Bluetooth Headset

3 Answers

I.Tech BlueBand Bluetooth Stereo Headphones whate is the pin code


Hi, In some states, hands free driving is the law. In order to avoid a ticket you need to talk on your cell phone with a bluetooth headset or speaker or with a headset that attaches directly into the phone. Bluetooth headsets are popular for this and other reasons but connecting it to your phone can be confusing. Here are some steps to help you connect your bluetooth device to your cell phone.

Instructions

Things You'll Need:

* Bluetooth headset
* Bluetooth capable cell phone



Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.



Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.


Hope it helped.
And please don't forget to rate me...

Thanks and have a nice day...

Feb 21, 2011 | Itech Blue Pro Bluetooth Stereo Headphones...

1 Answer

I cannot pair my Plantronics 925 with Sony Ericsson x8


Hi, blue tooth pairing with cell phones all have the same paring steps.

How to Pair (Connect) a Bluetooth Headset to Your Phone

So you've heard of this new thing called "bluetooth..." But what is it? ...And what does it do for me? It's wireless technology that can link your phone to a headset, computer, another phone, or in extreme cases, your car and home.

We'll just start with the basics and connect a headset to the phone



Instructions



Things You'll Need:

* A Bluetooth cellular phone
* A Bluetooth Headset




Blue tooth can simply be called "a generic wireless technology that can connect your phone, computer, headset, PDA, laptop, and any other enabled device to each other."

In essences, it was designed to be a universal wireless connector between devices.

Ok... Here we go.
Make sure that both your phone and new headset are charged up.


Since every brand of headset is different, please refer to the instructions for "Pairing", but I will tell you how the most common headsets pair.

By the way, "Pairing" just means "connecting". If you find it more simple, you can substitute the word.

On most headsets, from the Headset being off, hold down the answer/end button down until the indicator light(s) glow a solid color (usually blue). This may take up to 10 seconds. They might flash first, then after a couple more seconds, go solid on.


On your handset, find the bluetooth menu.

On most phones, go to the settings menu, then to "connections" and then "Bluetooth". You are looking for a link to "Add a new device".

On Motorola phones, it is in the "Handsfree" link. Select [look for new device] select this option, and hit "OK".

Nokia Phones: look for "search for new audio enhancements". Hit OK.

On Samsung phones: **Bluetooth menu might be under "tools"** Look for "Add new device". Hit OK.


The phone will search for a couple seconds. If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"


The headset and phone will connect to each other. The phone will display a message that will be something to the effect of:
"Connected to headset".

At this point, the phone MAY ask if you want to use the headset. This means all audio from phone calls would be routed to the headset rather than in to the phone's speaker or earpiece. Select yes, or ok.


Your headset is now set up for you to talk on like a REALLY important CIA agent or something of the like...

Keep in mind that when a call comes in, the phone will still ring like normal.

You can answer the call by either:

1. Pulling the phone out of your pocket and hitting the answer button.
2. Touching the answer/end button on your headset without reaching for you phone.

The range of your headset is up to 30 feet, in a direct line of sight.

If you go into another room, your range may be decreased.

If you do happen to go out of range, the call will be transferred back to the phone, and as soon as you are in range again, touch the answer button on the headset to let the phone know you're back in range. It will re-transfer the call back to the headset.


If you turn off the phone, or headset, you can repair them again simply by going to the bluetooth menu and selecting the headset again from the list. It will reconnect without a pass code and you are up and running again.

*** Please note that you do not have to hold down the answer/end button on the headset until it goes a solid on again.

Tips & Warnings

If you have difficulty, please feel free to contact me and I'll help you get things sorted out.


Hope it helped..

Feb 09, 2011 | Cell Phones

1 Answer

How do I find a passkey to link to my cell phone


Hi,follow the instruction below:

How to Pair (Connect) a Bluetooth Headset to Your Phone

So you've heard of this new thing called "bluetooth..." But what is it? ...And what does it do for me? It's wireless technology that can link your phone to a headset, computer, another phone, or in extreme cases, your car and home.

We'll just start with the basics and connect a headset to the phone



Instructions



Things You'll Need:

* A Bluetooth cellular phone
* A Bluetooth Headset




Blue tooth can simply be called "a generic wireless technology that can connect your phone, computer, headset, PDA, laptop, and any other enabled device to each other."

In essences, it was designed to be a universal wireless connector between devices.

Ok... Here we go.
Make sure that both your phone and new headset are charged up.


Since every brand of headset is different, please refer to the instructions for "Pairing", but I will tell you how the most common headsets pair.

By the way, "Pairing" just means "connecting". If you find it more simple, you can substitute the word.

On most headsets, from the Headset being off, hold down the answer/end button down until the indicator light(s) glow a solid color (usually blue). This may take up to 10 seconds. They might flash first, then after a couple more seconds, go solid on.


On your handset, find the bluetooth menu.

On most phones, go to the settings menu, then to "connections" and then "Bluetooth". You are looking for a link to "Add a new device".

On Motorola phones, it is in the "Handsfree" link. Select [look for new device] select this option, and hit "OK".

Nokia Phones: look for "search for new audio enhancements". Hit OK.

On Samsung phones: **Bluetooth menu might be under "tools"** Look for "Add new device". Hit OK.


The phone will search for a couple seconds. If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"


The headset and phone will connect to each other. The phone will display a message that will be something to the effect of:
"Connected to headset".

At this point, the phone MAY ask if you want to use the headset. This means all audio from phone calls would be routed to the headset rather than in to the phone's speaker or earpiece. Select yes, or ok.


Your headset is now set up for you to talk on like a REALLY important CIA agent or something of the like...

Keep in mind that when a call comes in, the phone will still ring like normal.

You can answer the call by either:

1. Pulling the phone out of your pocket and hitting the answer button.
2. Touching the answer/end button on your headset without reaching for you phone.

The range of your headset is up to 30 feet, in a direct line of sight.

If you go into another room, your range may be decreased.

If you do happen to go out of range, the call will be transferred back to the phone, and as soon as you are in range again, touch the answer button on the headset to let the phone know you're back in range. It will re-transfer the call back to the headset.


If you turn off the phone, or headset, you can repair them again simply by going to the bluetooth menu and selecting the headset again from the list. It will reconnect without a pass code and you are up and running again.

*** Please note that you do not have to hold down the answer/end button on the headset until it goes a solid on again.

Tips & Warnings

If you have difficulty, please feel free to contact me and I'll help you get things sorted out.

Hope it helps.

Thanks for using fixya....

Jan 09, 2011 | Uniden BT-108 Bluetooth Headset

1 Answer

I have misplaced the information on how to work my bluetooth headset (HFBLU-1K) could you send me a new one Thanks


Hi

These instructions should work for pairing your bluetooth device

1. First turn OFF the Bluetooth Headset
2. Place the Headset within a distance of 1 Foot of your phone.
3. Hold down the power key for about 8 seconds until indicator light blinks and starts to alternate between red and blue. This shows it is in pairing mode
4. Set your phone to search for a bluetooth device.
5. Select HFBLU-1K in the bluetooth device list and if required enter the password 1234


Hope this helps. Do let me know how you get on and remember to rate my answer. Thanks.

Oct 02, 2009 | Cellular Innovations Cell Phones

2 Answers

220 Plantronics bluetooth instructions


Start with the device off but fully charged. Press and hold the call control button for 8 seconds; at this point, you'll see the light flash blue then red. You'll have two minutes to connect it to your new phone. Use the passkey 0000 after your phone finds the headset.

Apr 02, 2009 | Plantronics Explorer 220 Bluetooth Headset...

12 Answers

How do i connect my bletooth h350 to my phone


Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset

Jul 16, 2007 | Motorola Mobility H350 Wireless Headset

Not finding what you are looking for?
Plantronics - Bluetooth Headset Plus Base & Headset Logo

18,549 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Radio Communications Experts

LeAnna Mathews
LeAnna Mathews

Level 1 Expert

3 Answers

shaun taylor

Level 3 Expert

1525 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a Plantronics Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...