I need a shop manual/repair manual for a dixie narco dncb 368, where can i find one? I have bought an old machine and trying to get it working.

It sounds like your Dixie Narco 5800 Bev Max 6 vending machine is displaying a "Product Disabled" message when someone tries to make a purchase, even though the machine is stocked with products. There are a few potential reasons why this could be happening.
First, it's possible that the product selection has been disabled in the machine's configuration settings. If this is the case, you'll need to access the machine's settings and re-enable the product selection.
Another possibility is that the product's sensor or delivery system may not be functioning properly. This could cause the machine to be unable to detect the product's presence or deliver it to the customer.
It's also possible that the machine's payment system may be malfunctioning, preventing customers from purchasing products.
Lastly, the machine may be low on a critical supply, such as coins or bills, which could prevent it from being able to sell products until the supply is replenished.
If you're having trouble resolving the issue on your own, you may need to contact a vending machine repair technician for assistance. They'll be able to diagnose the problem and get your machine back up and running.

Hi,

Please call the manufacturer and request that they email you the manual for your soda machine. This should be the most efficient way to gain the knowledge that's needed to update the pricing as you've requested. The manufacturer phone number might be on the side of your machine.

Thank you.

Question edited for clarity.
Question moved from computers to Vending Machines.

Spray the path of travel and the flap with a dry silicone spray like Jigaloo. It will increase its speed.

https://www.google.com/search?q=jigaloo+silicone+spray

https://www.google.com/search?q=Dixie+narco+SII+D+VRV+Coke+7+select+368%2F440

..

Well, the Dixie NARCO 180/105-5 appears to be a vending machine, not a bicycle, but a simple Google search for it provides plenty of resources, including the link below regarding a service manual: Dixie Narco Service Manual Try Google next time - works great.

I’m happy to help further over the phone at https://www.6ya.com/expert/donald_f2ed37026a3ac881

I Goggle it. operation manual for ----------

Try it without the bill acceptor attached to get the machine working. You did not say what kind of acceptor but three flashes often mean a bad sensor in the unit. Another possibility is that it is disabled from the vendor. Check that all the columns have returned to home position if it is a bag vendor. If it is a pop machine then take off the metal cover over the vend motors and CAREFULLY push down on the microswitches to see if the motors run. Pop may fall out as you do this so watch for it. After running all the motors or homing out all the columns try you machine again. You will probably have to get the bill acceptor fixed though.

Check behind the coin mechanism. When you open your machine, pull out the coin mechanism. You will see a set of dip switches there. Go to this page for more help. http://www.vendingadvantage.com/troubleshooting.htm

Yes the new refrigerants can be used, however you must be EPA Certified. Also why would it need re-charging ? Leaks must be repaired.

i need a manual for a dixie dmv 72w-10