Question about Zenith Projection Televisions

4 Answers

R56w36 convergence problem. color misaligned. Ghosts.

Posted by on

  • 1 more comment 
  • Walter Burgos Aug 11, 2008

    this tv only gives me the option to auto convergence there is no manual.

  • Walter Burgos Aug 11, 2008

    I do not have the option to manual set the convergence on r56w36. How do I get into service mode.

  • Walter Burgos Aug 11, 2008

    no i dont have a manual adjustment on this set

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 659 Answers

Wait 20 mins after the tv is turned off to use the auto convergence button

Posted on Aug 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers

U need go with a professinol service man

Posted on Aug 11, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 623 Answers

Try this link
www.retrevo.com/support/Zenith-R56W36-TVs-manual/id/276ci969/t/2/ - 30k -

Posted on Aug 10, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

Dear Sir:

Thank you for contacting fixya.

Please follow the steps below.


green is fixed so you have to move red and blue to green.
by using the remote you may find a simple converge function and open this and using arrow keys move the blue or red first to center of screen, repeat for other color you should see the lines moving toward a a white center point.

if the lines do not move with remote try manual ...menu on the set. if still no movement you have a problem on the convergence board and need a tech to fix.

A service manual will explain complex convergence to the detail .
but this might take hours to get it right.

Please feel free to get back to me If you need any further assistance.
Regards,
Mohammed.

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Convergence Problem R56W36


Locate the convergence board and get a dot or color generator to throw a pattern on the screen and attempt to converge the three guns. If unable to do, the board is shot.

If handy you can take out the board and checkout the board caps and replace any that have gone bad.

Feb 14, 2016 | Projection Televisions

5 Answers

Ghosts


How old is ur tv...? Cos the wear & tear is the cause for this ghost appearance. The repair for this is only temporarily. It can not be eliminated completely.

Generally the blue ad yellow colour can be removed by a tool which is available with a tv technician. It is not very expensive to do this. Hoping to hear from you.

Thankyou

Apr 14, 2008 | Samsung HCM5525W 55" Rear Projection...

1 Answer

My Zenith tv has wild colors and double image. what do i do?


Possible that the lamps are out of alignment resulting in poor convergence of the image.
You might have tto use a test pattern to see if this can be corrected or if this is the fault if the convergence section.

Sep 17, 2010 | Zenith R56W36 56" Rear Projection...

1 Answer

My red is off. Convergence issue...


Convergence Problem
This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Sep 11, 2009 | Zenith R56W36 56" Rear Projection...

2 Answers

R56w36 convergence adjustment


1. With the TV on, press and hold the MENU button on the TV front panel.
2. While holding that button, press and hold the MENU button on your remote.
3. Hold both buttons for ~5 seconds until the service menu comes up on the TV.
4. Release the remote MENU button first, then the TV MENU button.

Mar 13, 2009 | Zenith R56W36 56" Rear Projection...

1 Answer

I have the Zenith R56W36 56 in. Rear Projection Television, and im getting a 3d affect is there a way to solve this problem?


yes the convergence needs to be repaired. You can get a kit for your model which includes both convergence ICs and all the feed resistors . the kit also includes free instructions so you can do the repair yourself. Heres the link to the proper repair kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/r49w36-r56w36-convergence-repair-kit/cName/convergence-repair-kits

Jan 24, 2009 | Zenith R56W36 56" Rear Projection...

2 Answers

Zenith r56w36 56 in


My picture was fine but I had just got cable and wanted to make sure the picture was right. So I hit the auto convergence and now I have a 3 D look. I have never had any problems prior to this. What can I do? and what was is the problem? Thanks

Dec 19, 2007 | Zenith R56W36 56" Rear Projection...

1 Answer

Zenith R56W36 covergence problem


you will need to replace conv ic's then auto converge..

Oct 19, 2007 | Zenith R56W36 56" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

342 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Zenith Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...