Question about Motorola Mobility DRC800 Universal Remote Control

1 Answer

Need code for Element 15" FLX-1511B HD LCD Television

No code listed for Element TV's in DRC800 instructions

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try this site -> http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/122830.htm

Posted on Sep 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program ONN (code?) urc with Motorola sat box


If you want the Motorola remote to control the TV or another device, then you should be looking at the instructions for the Motorola satellite box. You'll find a list of codes in the back of the book for the TV brands it supports.

If the code for your particular TV or other device isn't listed then there's a way to use the remote to search its entire code base. This can sometimes provide the answer where a certain TV chassis is sold under several different brands.

The Motorola DRC800 universal remote instructions can be viewed here
Motorola DRC800 User Manual

Sep 21, 2014 | Remote Controls

1 Answer

Dish network code for element flx 3210??


If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Sep 12, 2014 | Remote Controls

1 Answer

Hi my name is Oscar I have a tv element model FLX-3211B and do not work the remote control codes sony RM-VZ320 and need help please!


Please reset the codes and try again. You must replace the batteries by new ones type alkaline b) clean the contacts batteries c) retight the spring contacts batteries with pliers d) open the remote control for clena the keypad switch from dirty, dust, oxide, bad contacts or open , remember they send infrared signal from Syscon to the microncontroler Receiver. see the blck..d
go to the next web pages, give your model, mark.
www.remotecodelist.com + remotes.com
God bless you

Jul 29, 2012 | Sony RM-VZ320 Remote Control

1 Answer

I need a code for my element tv for the dish remote


Hi there! This is Cheri Torres with DISH Network customer service. I was reading through the questions posted here and wanted to see if I could be of assistance to you. :) We have a few different codes for each of our different IR remotes, so I will give you the remote codes that work the best for the most common remotes that we have. For the 3.0, 3.1, and 3.2 IR remotes the best codes are 627 and 659. For our 5.0, 5.2, 5.3, and 5.4 IR remotes the best codes for the Element TV are 627 and 902. I would also like to list for you the instructions for addressing your remote to your Element TV. I hope you find these codes and instructions useful. If you have any further questions regarding this issue or any other issue please feel free to post back here or email me at Cheri.Torres@Dishnetwork.com.

Instructions for addressing your DISH remote to your TV

  1. Turn the Television On.
  2. Press and Hold the TV mode button for three seconds until all of the mode buttons light up. Once you release the TV button it should flash.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Dec 08, 2010 | DISH Network IR Remote Control

1 Answer

Dish remote code for Viore 32" HD LCD


Hi, my name is Cheri Torres and I am with DISH Network customer service. I came across your post and wanted to see if I could help. DISHNetwork remotes have a few different codes for each of our different models of remotes.You should be able to find your remote model number on the back at the top ofyour remote it's usually a two to three digit number with a decimal point. Iwill list here for you the best codes for the most common DISH remotes and alsothe instructions for addressing your remote to your TV. The only codes that I was able to find for the Viore TV were for the 5.3 IR remote and the codes are 563 and 500. If these codes do not work you can also try running a channel scan to find your particular code. I will also list here for you the instructions for running a power scan. I hope you find these codes and instructions useful and if you have any further questions or concerns feel free to post back here or email me at Cheri.Torres@Dishnetwork.com. :)
Instructions for addressing remote to TV,
  1. Turn the Television On
  2. Press and Hold the TV mode button down until all the mode buttons (i.e AUX, SAT, TV etc.) light up.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound(#) button once. Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Instructions for running a power scan
  1. With the desired equipment on, press and hold the TV button down until all the mode lights light up.
  2. Press 500 using the number key pad.
  3. Press the pound(#) button once.
  4. The TV button will blink red three times.
  5. Then again press and hold down the TV button down until all the mode lights light up.
  6. Press and release the big red Power button once.
  7. Press the Up button once every second while pointing the remote at the desired equipment. Keep pressing the up button until the TV turns off until.
  8. AS SOON AS THE TV TURNS OFF Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
  9. Try the functionality of the TV to see if the power scan worked.

Nov 29, 2010 | DISH Network IR Remote Control

1 Answer

No code for Polaroid LCD TV


Code Polaroid 1250.

if it does not work try SEARCHING FOR CODES
If none of the codes listed under
“Device Codes”on the back of this
guide match your device, you can
search for a set of commands that will
work. Your remote will sample all the
codes in its system for that device
mode to find one that will allow you to
control your device. 1. Press and hold a device mode
key (AUDIO, DVD/VCR, or TV) for
at least six seconds. The LED for
each device key lights up, then
the key for the device you
selected remains on. 2. Press a function key (such as
Power or Mute). The following
function keys are valid for
Searching (Power is
recommended):
• Power
• Mute
• Play
• CH +
• Stop
The device key’s LED blinks
three times, then turns off. 3. Press (up) The remote will send
the IR command for the function
you pressed in Step 2. 4. If the device performed the
function you pressed, press OK.
The remote will now control the
device you selected in Step 1.
If the device did not perform the
function you pressed, repeat step
3. Press (down) to retry the previous
code. rmarti Colombia

Apr 05, 2008 | Motorola Mobility DRC800 Universal Remote...

1 Answer

Emmerson lcd tv,onkyo reciever,and toshiba hd dvd player codes


i can't play dvd's in my receiver, need some type of code to unlcock deck

Jan 08, 2008 | Motorola Mobility DRC800 Universal Remote...

2 Answers

Motorola DRC800


Try this site -> http://www22.verizon.com/ResidentialHelp/FiOSTV/Remote+Controls/SetUp/QuestionsOne/84901.htm

Nov 16, 2007 | Motorola Mobility DRC800 Universal Remote...

2 Answers

Universal remote codes


try 21086. you could also do a code search with the remote its on the comcast.com website under remote codes and do a code search.

Sep 12, 2007 | Motorola Mobility DRC800 Universal Remote...

Not finding what you are looking for?
Remote Controls Logo

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Motorola Mobility Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...