Question about Televison & Video

Open Question

Replacement PCB for Black Diamond Freeview digital tv box (UK)

Black Diamond digital TV set-top box Model BD68STB manufactured for Mitsubishi Electric. 2004
Small prinref circuit board with external controls broken.
Is it possible to buy a replacement?
PCB codes: 16FP915-1, E 125498 1R, 06094

Posted by on

5 Suggested Answers

  • 2 Answers

SOURCE: Using an old SKY digibox for Freeview ?

you have a smartcard for that box ?, cause without that card, you won't see any of the channels at all.

Posted on Nov 18, 2007

SOURCE: No manual for Sagem ITD58G Freeview Box

http://www.sagem.com/support/site/livret/LU_UK_ITD64_62_61_60_58_59_68_72.pdf

Posted on Jun 30, 2008

  • 1 Answer

SOURCE: Schematic and/or wiring diagram - Magnavox TV Mod 20ms233s

the problem in my tv is the sound no have

Posted on Jul 04, 2008

  • 1 Answer

SOURCE: installation code tv set top box

TRY 1234 or 0000
anyone got a manual for one of these?? i've lost mine.

Posted on Jan 06, 2009

  • 1 Answer

SOURCE: Can't set up my new Nikkai 5.8GHz video sender.

Could be that the Scart socket doesn't pass through the signals from the receiver. I had a Goodmans TV with Scart input which just didn't respond to the receiver. When I moved it to the Scart connector on my VCR it worked a treat.

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i tune my SAMSUNG PS42S5H for high definition channels


Does this model of TV have a built in HD receiver? I've had a quick look at the instruction manual and it looks more or less the same as mine at home. I've not got HD tv reception built in but have to use a set top box. If you're in UK, it should have Freeview HD sticker from the box or manual somewhere but as this looks like an early model tv (only 1 HDMI socket) then you may need a HD set top box such as Sky HD or Freeview HD

Oct 15, 2014 | Televison & Video

1 Answer

We have a Diamond Vision TV/DVD and the remote does not work. Is there a contact email or 1-800 number I can call to order a replacement one?


Diamond Vision is actually manufactured by Mitsubishi, so you can use this website to figure out the remote model # using your TV's model #. Then you can call the 1800 number listed on the top of the page to order it :)

Jul 18, 2011 | Televison & Video

1 Answer

Retuned my Freeview receiver but now have black bars.


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Oct 01, 2009 | Sony BRAVIA KDL-40V4000E 40 in. LCD TV

1 Answer

Dmtech tv with freeview


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Sep 30, 2009 | DMTech DM-AV10 Digital Media Player

1 Answer

Started to retune our tv this afternoon and it gets stuck on channell 68 and won't switch off, except manually. What should I do?? The set top box is Netgem. Thanks


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Sep 30, 2009 | Samsung LE32R74BDX 32 in. HD-Ready LCD...

1 Answer

Up until today samsung freeview tv model LE26R74Bd working fine: this am, will not do anything except volume control, stuck on BBC2, have tried new batteries in remote, leaving off for an hour. Buttons on...


PRESS THE DTV / TV BUTTON TO GET TO THE MENU.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Sep 30, 2009 | Samsung LE26R72B 26 in. HD-Ready LCD...

1 Answer

How do i retune my philips 42pfl5522d tv


You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit
http://tvretune.co.uk/productmanuals

Sep 30, 2009 | Philips TV Tuner Video Capture PCI Card -...

1 Answer

SONY BRAVIA -KDF-E50A12U- SENTANTA FREEVIEW TUNING PROBLEMS.



You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Aug 13, 2008 | Sony BRAVIA KDL-40V2500 40 in. LCD HDTV

2 Answers

Sound problem on Technika LCD19-907


The retuning process is as follows:

  1. Press the [i+] or MENU button on the remote control to display the DIGITAL INFO menu.
  2. Press the BLUE button to display the MAIN MENU.
  3. Press the UP or DOWN buttons to highlight AUTO TUNING then press the OK button to display the AUTO TUNING MENU.
  4. Press the RED button to start the auto tuning process for all available digital channels.
  5. Wait for the process to complete.

If you wish to CANCEL the auto tuning process whilst it is processing then press the BLUE button at any time.

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Jun 19, 2008 | Sony KDF-E60A20 60 in. LCD HDTV

1 Answer

How do you record uk freeview channels on this model


in the uk you can get a set top box from little as ten pounds and upwards for more advanced models and just add to your tv dvdrec. and record them. if not in the uk sorry no go for freeview .



riz.

Nov 18, 2007 | Samsung DVD-R155

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71635 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

67911 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...