Question about Delphi NAV200 GPS Receiver

3 Answers

Blank Screen The unit powers up (buttons blue lights appear but screen is blank, pushing any button does nothing.

Posted by on

  • 7 more comments 
  • Anonymous Aug 23, 2008

    when unit is turned on screen is black..........

  • rissann22 Aug 27, 2008

    I am having the same problem, is there something that can be done

  • Lynn Bristol Aug 29, 2008

    touching screen does nothing, all the icons are there but nothing happens when touched

  • hoop3t Sep 21, 2008

    unit lights up,makes noises when buttons are pushed but does nothing else, does anyone have a solution if so let me know hoop3t@aol.com lowrance x51

  • Anonymous Oct 05, 2008

    I have he same problem is it common with this unit

  • Anonymous Dec 11, 2008

    I have the same problem. Started about 6 months after I bought it. Please let me know when a solution is found.

  • ggore349 Dec 13, 2008

    powers up but get a blank screen

  • thecaddells Dec 14, 2008

    My GPS unit powers up to the lights coming on but there is nothing on the screen.

  • perceptions1 May 10, 2009

    When I press the power button, the main icons light up, but the screen does not. I have pressed the screen saver button on the lower left side, but still nothing happens.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Same Problem. I fixed mine with a baseball bat, hammer, and a cold beer. Lesson learned: NEVER BUY DELPHI AGAIN. NEVER..... Tell your friends. Delphi = POS

Posted on Jul 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The unit powers up (buttons blue lights appear but screen is blank, pushing any button does nothing.

Posted on Sep 03, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My gps unit shows that the unit is turned on but the screen is still blank. Could you please help.
Thanks Charissa

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Turned on the Garmin nuvi 1200. the Garmin logo comes up, loading maps comes up then it goes blank and begins the cycle again. I have held the power button down nothing. I have touched the bottom right of...


Hi! Please try inserting a paperclip on the reset button. Press hold for atleast 15secs. and this can resolve the problem. Hope this helps and thank you for using FixYa!

Oct 16, 2010 | Garmin nuvi 1200 Car GPS Receiver

1 Answer

Device comes on but screen is blank...will not load menu


there is a small reset button on the bottom disconect the power hold in the rest button on the bottom of the unit and power it up this will reset it to the factory default

May 09, 2010 | Tomtom ONE GPS Receiver

1 Answer

When I turn on my 255W and get to the license screen, the screen goes blank


Hello :

I think you have software problem with your NUVI and you need to reset it to fix the problem .


1:Turn the Nuvi on.

2:Touch the tools icon on the main screen. The tools icon is represented by a wrench surrounded by a blue circle.


3:Touch the "Settings" icon which appears as a wrench.

4:Push the "Restore" button at the bottom of the screen. A confirmation message will appear asking to confirm restoring the Nuvi to factory settings. Push yes to restore the factory settings
............................................................................................
Try this for hard reset .

Turn off Garmin device. Press down on bottom right corner of the touchscreen [ Don't let go ] , and then power on the GPS unit. You should be prompted whether do you really want to erase all user data, or asked if do you really want to start up in maintenance mode. Press “Yes” to reset (warning: all data will be erased and lost, so backup before proceeding) or enter maintenance mode.

PLEASE DON'T FORGET TO RATE !

Apr 15, 2010 | Garmin nuvi 255W GPS Receiver

1 Answer

Screen stays blank when plugged up to charger. Tried pushing off/on button. Been used only twice. Bought new in 2007.


Hello. many GPS's have a reset button hidden under the plastic frame around the screen. look around the perimeter of the screen and you may see a thumb nail ****. Carefully pry off the screen and you may see a reset button. push the reset and hopefully you will be up and running again.

Aug 06, 2009 | GPS Devices

1 Answer

Garmin Nuvi won't turn on


See if you can find the reset button on the unit and push it while the unit is on. On newer units the reset button is on the back, but on older units it may have a faceplate cover around the edge of the screen you have to remove and the reset button is sometimes located under the faceplate...this may work

Jan 01, 2009 | Garmin Nuvi 660 GPS Receiver

1 Answer

Blank screen


you have the backlight turned off, press the lower left button once, the screen should re-appear

Aug 27, 2008 | Delphi NAV200 GPS Receiver

1 Answer

No power to my ICN 520


Have you tried the reset hole? make sure there is nothing stuck in there that could be pressing on the button. When you press and hold the reset button the screen stays blank.

If you press the reset button does the unit turn on? Mine turns on when I press the reset button even after I turn the battery off then back on.

Hope this suggestion might help you restore functionality.

Jun 08, 2008 | Navman iCN 520 GPS Receiver

1 Answer

Will not turn on


When holding the power button, to turn on the device, the screen pixelates dark and then goes blank. If I continue to hold the power button the screen will continue to pixelate dark and then go blank. In the end, the device still will not turn on.

Dec 18, 2007 | Garmin GPSMAP 180 GPS Receiver

1 Answer

Screen goes blank


Maybe the setting of your video display was change to higher setting, and your screen cannot handle the said setting.

When a "safe mode" message appears during opeing, select that options, then at the desktop right click your mouse, chose properties, then setting, then change the screen resolution to lower range.

Dec 05, 2007 | GPS Devices

1 Answer

Blank screen


Same problem that the older IFiner (Lowrance) had, it is an internal problem with the GPS, needs to go in for repairs, BUT first see if it is cheaper to just purchase another GPS

Oct 06, 2006 | Magellan Meridian GPS Receiver

Not finding what you are looking for?
Delphi NAV200 GPS Receiver Logo

Related Topics:

991 people viewed this question

Ask a Question

Usually answered in minutes!

Top Delphi GPS Devices Experts

Cindy Wells

Level 3 Expert

4753 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Toyosi  Sarumi
Toyosi Sarumi

Level 3 Expert

597 Answers

Are you a Delphi GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...