Question about Sony FD Trinitron WEGA KV-32HS500 32" TV
When we try to turn the TV on, we get no picture or sound. The standby light will flash 4 times. I know this is an error code but I don't know what it means. I tried unplugging the TV and replugging it in, and It didn't work.
4 flashes mean the IC5004 (STV9379)on D-Board went bad and the 15V supply is no longer steady. The IC
is rather easy to find and inexpensive (around $2.50). Your main
problem will be desoldering the old one and soldering the new one. CAUTION! - Heat sink on IC5004 is -15V. Care must be taken not to allow heat sink to touch any other components
Posted on Jan 04, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 14, 2015 | Sony Televison & Video
Feb 03, 2013 | Televison & Video
Aug 19, 2012 | Televison & Video
Standby/Power light of the TV blinks when there is any internal malfunction in
the TV. The self-diagnostic function of the TV will cause the STANDBY light to
blink or flash when the television detects an issue. The number of times the
STANDBY light flashes corresponds to a specific issue.
examples are given below; some of the issues may be resolved without the need
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.
the television is plugged into a power strip or surge protector, remove it from
the power strip or surge protector and plug it directly into the wall outlet.
If the issue is resolved, the problem is with the power strip or surge
protector and not the television.
the issue continues to occur, service may be required.
for using Fixya.
Feb 04, 2011 | Sony FD Trinitron WEGA KV-32FS100 32" TV
Jul 15, 2009 | Sony FD Trinitron WEGA KV-36XBR800 36" TV
Sep 18, 2008 | Sony KV-24FV12 24" TV
Mar 15, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV
212 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: