Question about Cisco ASA 5520 Firewall

1 Answer

Multicast Streaming is not passing through Firewall.

I am using ASA 5520. On inout side I am having my own network with streaming videos. I am doing NATING inside the firewall & giving output to other network. Earlier it was working fine but since last few days it has stopped functioning. I have reloaded the configuration (which was working earlier), I have upgraded the firmware of firewall as well as ASM. Still there is no result. I badly need the solution.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Hi Hemalsj,

Did you enable multicast-routing?

Hope this helps:

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807631d2.shtml


Regards,

ex_ocsic-cat

Posted on Nov 22, 2008

  • rottie89 Sep 14, 2010

    Hello,

    I am trying to run multicast through a Cisco ASA 5500 firewall with a 3640 on the inside network

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i configure pppoe on asa 5520 ver8.4 and remote access vpn?


http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/pppoe.html

Nov 08, 2012 | Cisco ASA 5520 Firewall

1 Answer

I desire to block video streaming on my network. youtube et al pending the time i have approval for a welb filtering solution


You can not do content filtering with ASA firewalls with IOS. You will need to buy a content filtering solution, or sign up for a inexpensive content filtering with OpenDNS.org. This is a good content filtering basic system with white and black listing capability.

Good luck!

Mar 27, 2011 | Cisco ASA 5520 Firewall

1 Answer

How to block a port in cisco asa 5520 firewall


hi,
when u login in ASDM you can find on right side services and u create one whre u add which all ports u want to and apply that in ur rules

Aug 23, 2010 | Cisco ASA 5520 Firewall

1 Answer

Need some basic show command to troubleshoot


mode exec user Router)
ping ip
show ip route
show version
traceroute ip

mode exec priveligiado
show arp
show interface
show protcols
show ip protocols
show startup-config
erase startup-config
reload

Jul 27, 2010 | Cisco ASA 5520 Firewall

1 Answer

How do I recover firewall password?


You may refer to the steps in the link below:

http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/trouble.html#wp1049302

I hope this helps!

May 05, 2010 | Cisco ASA 5520 Firewall

1 Answer

I have cisco asa 5510 firewall and i have dialup internet connection i want my asa 5510 between my LAN and my dial up internet


Your best bet is to place the ASA into 'transparent' mode, and letting the traffic pass through it and be inspected on the way through.

To do this you need to first do the following command:
firewall transparent

Once in transparent mode, the firewall will no longer look like a hop in the packets journey, and you can set rules to allow/disallow traffic using access lists on the inside and outside interfaces, plus you can perform packet inspections using policy-map and inspects.

Hope that helps!

Feb 12, 2010 | Cisco ASA 5510 Firewall

1 Answer

Hello all can you please help me on how to restore the configuration of my ASA 5520? thanx


If you are going for factory reset use the following commands

asa>enable
asa#write erase
asa#reload

Dont save the configuration when it prompts for it.

if you want to restore the configuration from the backup

1. You need to have a TFTP server
2. Locate the config file on your TFTP server
3. TFTP server should be reachable from ASA

then

asa#copy tftp flash

give the tftp server ip address
give the configuration file name (as exactly on the TFTP server)

reload


Apr 01, 2009 | Cisco ASA 5520 Firewall

1 Answer

ASA LAN failover Problem


Hi,

The crossover cable should work fine for sure.

Best Regards,
TL

Mar 17, 2009 | Nokia IP 350 Firewall

1 Answer

PIX AND ASA Configuration


Voila un link pour un bon simulateur:
http://networksims.com/pix.html

Nov 20, 2008 | Cisco ASA 5520 Firewall

2 Answers

Problem in installing the asdm image ASA 5520 ver 7.1


I had this same issue on my ASA 5520.

1. Copy the config and IOS image to a tftp server.
2. Format flash (disk0)
3. set rommon server, ip addy, and file settings.
4. tftpdnld
5. Once the system has booted to the image copy the asa image file, asdm image file, and config to flash
6. configure asdm image default location and reload

Feb 27, 2008 | Cisco ASA 5520 Firewall

Not finding what you are looking for?
Cisco ASA 5520 Firewall Logo

Related Topics:

2,354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Network Security & Firewall Devices Experts

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Candy

Level 2 Expert

82 Answers

Huseyin Huseyin
Huseyin Huseyin

Level 3 Expert

3462 Answers

Are you a Cisco Network Security and Firewall Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...