Microtek scanmaker 3800 windows 7 drivers, and how do I change my email address in your system. Under my account, it won't accept my new email address of [email protected]

type into google drivers.downloadatoz.com and then type in the name and model of your device and download the driver and install. your device should work good luck.

The scanner in question is not supported under Windows 7 as it is quite aged. I've seen reports of people getting drivers for the same scanner under windows XP and running them in compatibility mode, but these are hackish at best and may or may not work.

As it stands, there is no supported driver for the Microtek 3840 under Windows 7.

Not compatible or not working well with windows 7?

Maybe, It doesn't work because the driver/application you installed is for other versions of operating system. I am also using windows 7 like you so don't you worry, You can still use your old installer/driver from other versions of operating systems. Just remember that before installing any program in a windows 7 Operating System Computer, Use "troubleshoot compatibility". Right Click the Icon of your program installer/application first, then choose "troubleshoot compatibility". This will allow you to choose on what type operating system your program will run. Just reply back if it still doesn't work.:D rate and vote for me:))

You can download: ScanWizard 5 version 6.63 Here: ftp://microtek:[email protected]/microtek/pcfiles/drv_sw5_v6_63_ad.exe
Extract to folder on desktop. 1. Plug in your Scanner 2. Go to Control Panel (Windows 7 - 64 and 32 bit) 3. Go to Device Manager 4. Go to Imaging devices (or Other devices) 5. Find what windows have installed Right Click 6. Update Driver Software.. 7. Click - Browse my computer for driver software 8. Click - Let me pick from a list of device drivers on my computer 9. Click - Have Disk 10. Browse to your desktop or position where you extracted 6.63, point to "....drv_sw5_v6_63_ad\Disk1\Vista\AMD64\..." Pick any of INF files I picked first 11. You will see 4800 Scanner and USB 2.0 Scanner, I picked first 4800 then USB 2.0 and both works.
I managed before to do it with simple install but well, it works .. ;)

You can download: ScanWizard 5 version 6.63 Here: ftp://microtek:[email protected]/microtek/pcfiles/drv_sw5_v6_63_ad.exe
Extract to folder on desktop. 1. Plug in your Scanner 2. Go to Control Panel (Windows 7 - 64 and 32 bit) 3. Go to Device Manager 4. Go to Imaging devices (or Other devices) 5. Find what windows have installed Right Click 6. Update Driver Software.. 7. Click - Browse my computer for driver software 8. Click - Let me pick from a list of device drivers on my computer 9. Click - Have Disk 10. Browse to your desktop or position where you extracted 6.63, point to "....drv_sw5_v6_63_ad\Disk1\Vista\AMD64\..." Pick any of INF files I picked first 11. You will see 4800 Scanner and USB 2.0 Scanner, I picked first 4800 then USB 2.0 and both works.
I managed before to do it with simple install but well, it works .. ;)

This driver covers many OS
Microtek ScanMaker 3840/3830/3800 ScanWizard 5 5.93 driver download

Please gave a vote, it will give me some satisfaction to know that am helping some one so I will keep on helping.
Thank you.

you can download it from

http://www.driverskit.com/freedownload/Scanner/Microtek/ScanMaker_3840_3830_3800_ScanWizard_5_5_93/14515.html

You can get it right here

http://support.microtek.com/downloads/

Enter 4900 in the model number blank and click on search. Enter your windows version and get your download started....

Free.

Click HERE to download your driver. Just select your operating system and follow the on screen promts. Windows Vista is not supported.

You can download the drivers from this page: http://support.microtek.com/

cheers