Question about PC Desktops

1 Answer

Screen keeps going blank - PC Desktops

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 46 Answers

First thing to do is always check the cable. Make sure it push in all the way. If needed to screw it down. Could also be stand by time out. were the monitor is on a power saving mode. It will go black after 20 minutes or so. If this system stays on all of the time, change the power schemes to "Always On", just make sure you set the monitor and system or hard drive are set to "Never"

Check your power option in the control panel. Look for tab mark "Power Schemes"

Below are pull down menus to change the timeout setting for hard drive, monitor and system.

Let me know

comier957

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dark screen


Its more than likely a bad back light driver on the screen. it will all go blank shortly.. You need to replace the screen.

Dec 26, 2012 | PC Desktops

1 Answer

Screen keeps going dark


Its more than likely a bad back light on the screen. It will all go blank shortly, the solution is to replace the screen.

Dec 26, 2012 | PC Desktops

2 Answers

My computer's monitor keeps going into sleep mode and hsa no input signal to computer


right click on ur computer screen (blank area)
go to properties
screen saver
power

and select power scheme to "always on"

if i am able to help u please vote me

Jun 28, 2010 | PC Desktops

1 Answer

The monitor keeps going blank with a message ''no signal'' or ''out of range''.


Probably you are out of the resolution range for this monitor. Try to boot you computer in safe mode (for low resolution) using F8 just before the windows start screen, step down the resolution, restart and try step by step to upgrade the screen resolution.

Stelios.

Feb 21, 2010 | PC Desktops

1 Answer

My srceen goes Blank


Hi,

first try booting the laptop and pressing the Fn key with the numerical ( numbered key ) that has a picture of 2 screens on it. This is for booting to an external monitor. you could also try adding an external ( pc monitor ) this will eliminate any motherboard Faults.

Secondly, the graphics chip driver may be corrupt or not installed correctly. if you have a restore cd, you could try booting the laptop, with the cd in the drive.

you can then try, to see if the settings in the bios are all correct, by booting/starting the laptop and pressing esc or F2 or delete immediately as the laptop starts. ** Be-Careful** what you adjust.
My suggestion is to look for. ** default settings tab** or load setup defaults.

these are the obvious things to try, before assuming that you have a faulty graphics chip or motherboard fault.

Mike @ compurepair.

Jun 12, 2009 | Acer PC Desktops

1 Answer

No sound drive


is the sound card inserted properly and go to the manufacturers website and reinstall the driver

Jan 27, 2009 | PC Desktops

3 Answers

My acer aspire 5535 the screen keeps going blank


I had the same problem, going to a blank screen within minutes of booting up. I noticed that this coincided with the wireless light flashing which would indicate some sort of conflict between the wireless driver and the display driver possibly. I had to reboot into safe mode with networking to keep it connected. I then updated the wireless driver and rebooted into normal mode. Hey presto! It works and has now been running for several days without any black screens. I did not have to touch the BIOS at all. Mine is currently 1.03. Hope this helps some of you. P>S> Got mine from Dixons as a reconditioned unit at 3/4 the normal price , cost me £329. Not bad when they are still selling at Comet for £449.

Nov 07, 2008 | PC Desktops

1 Answer

Laptop Monitor keeps going blank or near blank. When the monitor is moved into a different position it may turn back on or it may not.


Sounds like the back light of the screen is playing up or there is a loose wire. Either way the screen will stop completely and will not keep working. The best thing to do is try and buy a new back light for laptop screen and replace it, or take it to a professional to look at and repair for you. It's not a simply fix. Thanks igi_57!

Aug 11, 2008 | PC Desktops

1 Answer

Screen goes blank


Does it flicker or just go black with the light flashing? Does it go back on again by itself? As of now, I suspect the video card is at fault without further details about the problem. Let me know

Oct 30, 2007 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...