Question about Phones

Open Question

I HAVE A BINATONE E880 TWIN CORDLESS ONE OF THE HANDSET WHEN IT IS ONTHE BASE CHARGING MAKES A CLICKING NOISE LIKE A CLOCK I HAVE REPOSITION THE BATTERIES STILL THE SAME AND IGET NO WARNING THAT THE SET IS WORKING IN THE WINDOW OR NOTHING HAPPENS WHEN I PRESS ANY KEY

Posted by on

6 Suggested Answers

SOURCE: Handset No Link To Base error and no dial tone

My battery is a Ni-Cd. I bought it new on eBay (TL26554 battery number). I allowed the new battery to charge for a long time and then tried to see if it would work. But no go....the handset gave me the same error message. Good Luck to you too! Mmmmmm

Posted on Sep 18, 2007

  • 1 Answer

SOURCE: handset has No link to base

I was having the same problem with the same model phone, and fixed the problem by rebooting the phone – unplugging the AC and phone cord from the base station and plugging both back it, then removing and replacing the handset to regenerate the security code.

Posted on Nov 19, 2007

  • 1 Answer

SOURCE: Dual Maxus 5.8GHz Handset Cordless Phone

Worked great! Thanks!

Posted on Jan 26, 2008

  • 1 Answer

SOURCE: GE dECT 6.0 Cordless Model 28112 Series

phones say do not disturb and will not ring

Posted on Feb 28, 2008

ynotphone
  • 192 Answers

SOURCE: "no link to base" error message

Sounds like the antenna is not working, and signal is not getting to the cordless sets.

Try unplugging your base station (unplug everything; power and phone cable - the basestation were all the cords are plugged into) and leave it unplugged, pull out all the batteries in the phones, and then start by putting all the batteries back into the phones.

Once the phones are back and powered up, plug in the base station again, and see if that helps.
All this is doing is re-setting the phones and base station and forcing them to re-link to each other.

I hope this helps.

Posted on May 01, 2009

  • 5 Answers

SOURCE: Uniden XS 1210 cordless phone won't connect to base unit

try connecting both phones via the base that is working and see if they recognize each other. Let me know if that works.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Are thee any Binatone handsets compatable as extra handset to add to Binatone symphony 3325 unable to get new handsets but main answering machine and handset are still working


with cordless phones the problem is that the hand sets have to be recognized by the base station ( paired) and unless you have the exact hand piece make and model this pairing and recognition will not happen
if you can get 2nd hand units for the 3325 base then the base will accept them ( any number of additions ) but if the hand piece is different it will not work
you you need extra hand pieces then it may be best to consider a new system where you can buy extra phones and chargers

Jul 13, 2016 | Binatone Phones

1 Answer

How do I call a twin binatone cordless in another room


  • 1. In standby mode, press (intercom).
    • • Intercom is established immediately if there are only 2 registered handsets.
    • • If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed.
  • 2. Press the handset number you wish to call or press * to call all handsets.
  • 3. Press (Talk) on a called handset to answer the internal call, where both internal callers can talk.
  • 4. To end the intercom call, press (End/off) on either handset.

Nov 27, 2015 | Binatone Phones

1 Answer

Out of range showing on all handsets


Unfortunately Binatone are not good quality. Did you extend the aerials if they have them, and the aerial wire on the base?

Oct 21, 2015 | Phones

1 Answer

Hanged batteries in handset but phone will not ring


Check to see if ringer is set to hi. make sure ringer is turned on. Check to see if the base and the phone are syncronized.

Jan 03, 2015 | BT FREESTYLE 750 TWIN DIG CORDLESS PHONE

2 Answers

I have a phillips CD240 cordless phone, on the screen is flashing SEARCHING and wont make or receive calls.


Hi, I solved this issue this morning. "Searching" means the handset cannot find the signal from its base, and if you check your base, it's more likely than not, dead. In my case, I checked this by pressing any button on the base, i.e. answer phone etc., there was no response (although the handset seems to recharge power fine for some reason).

Therefore, I went and bought a new cheap GAP compatible (binatone 1800 Single at Comet - 14.99). I then set up the base, put it in the registration mode as per the binatone instruction. Then on the Phillips CD245 handset and gone through the above registration procedure... and Voila! It worked.

Now I have a brand new base that came with 1 new handset of its own, and 3 additional CD245 handsets which are all registered with this base. So far, the sound quality is good (no different from the previous genuine set) and they retained all the telephone numbers registered with the handset.

I don't have any high regards to binatone specifically as a brand because our last corded phone system was rubbish and died shortly after 12 months guarantee but to me it looks as if GAP compatible cordless phones have certain life-span however cheap or expensive they are (while handset seem to last much longer). Threrefore, there is more incentive to buy a cheap base new (of any make that are GAP Compatible) then connect your old handset to this base and live on 12 months manufacturer's guarantee and hopefully more. On the web, I saw some comments that are saying GAP Compatible phones and base sometimes do not successfully register each other (despite even being of the same make or brand). Obviously the users make such attempt at her/his own risk but I can confirm that the above combination worked for me.

Just for info, to do the registration successfully, the both base and handset must be in "Registering" mode. First, to get the base in the registration mode, you have to press <page> (a paging function for handset in case you cannot find where they are - usually button that says <page>or speaker with sound symbol on the base) more than 5 seconds, then the base is in the "Register Mode"(though you will hear no beep). You can then go through the procedure you describe on the handset and the handset should beep with assigned number no more than 10 seconds after it flashed "Waiting".

I hope this is helpful.

Best,
Ken

The above, however, works only if the Base is still functioning.

Jan 02, 2010 | Philips DECT5112 Cordless Phone

1 Answer

Not registered


hello there i think this is because you need to register the second handset with the base here are the instructions

REGISTRATION
Registration links the base to a cordless handset. Once a handset is
registered it can use the base’s phone connection. A cordless handset will
not operate until it is registered to the base. During the registration
process, keep the handset near the base.
1. Press the flash/program button on the base until LINK HANDSET shows
in the display. 2NO is the default setting.
2. Press the 1 number key or press the MESSAGES/CID (or) button
on the base to scroll to 1YES.
3. Press flash/program to confirm handset is linked to the base. WAITING
HANDSET REGISTRATION shows in the display.
4. Press the flash/program button on the handset until LINK BASE? shows
in the display. 2NO is the default setting.
5. Press 1 on the handset keypad or cid/vol (or) button on the
handset to scroll to 1YES.confirmation tone when the handset is successfully linked to the base.
6. Press flash/program on the handset again to confirm. You will hear a long

please leave rating if you find this usefull hope this helps thanx for using fixya!!

Jan 26, 2009 | GE 27958GE1 Cordless Phone

1 Answer

Power outage messed up my phone


I am sure there is one to download but did not found anything with google... If search engines are of no help, just ask some deep web specialists, e.g. http://manualfox.com - if they don´t find it, it does not exist in the Internet.

Dec 08, 2008 | Motorola Mobility 5.8 GHz Digital Cordless...

1 Answer

New phone base works but extra phone doesnt


Hello, 1st step would be to make sure the phone still registered, mines keeps unregitering and it works after I reregister it, hope that helps.

Dec 03, 2008 | General Electric 28223EE2 Twin Cordless...

2 Answers

Need instructions to make cordless twin set work


If you had a power failure the memory may have been affected. Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} You may need to register the handset to the base by following the instructions in the user's manual

Sep 12, 2008 | GE 25952 Cordless Phone

3 Answers

I have a binatone g11 cordless phone. I cannot make a call as the handsets keep telling me searching or out of area. Even when i place the phone on the base, it still keep giving me the same message.


Try taking the batteries out of the handset and unplugging the master base set. Leave for 15 minutes and then have a try. This often reprogrammes some handsets to the default mode.

Aug 24, 2008 | Phones

Not finding what you are looking for?
Phones Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phones Experts

kakima

Level 3 Expert

96417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4755 Answers

Are you a Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...