Question about Zanussi ZWF1440 Front Load Washer
Hi, i have a small simpson front loader, the seal has flown out and I need directions on how to put it back in???? There are three parts, the rubber seal, a plastic hoop and a wire spring like cirles that is 2 thirds the diametre of the seal! ANY ADVICE WOULD BE APPRECIATED!!!
Not easy if you haven't done it before.
lubricate the slot which fits onto the lip of the tub with washing up fluid. start the slot onto the lip of the tub at the top and work your way round in both directionsn pressing the slot onto the lip of the tub. this is not as easy as it sounds..
when seal is completely located on the tub, put the spring in the outer groove at the top and work it into the groove all the way round. you may need an extra pair of hands for this.
the plastic hoop fastens the seal onto the cabinet and is easyu to fit.
test for leaks on the rinse cycle as the water level is higher
Posted on Aug 10, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 24, 2008 | Hotpoint Aquarius WF000 Front Load Washer
Oct 17, 2012 | Bosch Washing Machines
Oct 03, 2010 | Washing Machines
Sep 18, 2010 | Washing Machines
Sep 07, 2010 | Washing Machines
Aug 28, 2010 | Washing Machines
Aug 01, 2010 | Washing Machines
Dec 21, 2009 | Washing Machines
Jun 22, 2009 | Washing Machines
64 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: