Question about Cobra 150 GTL DX Base CB Radio

1 Answer

Cobra 150 gtl dx nightwatch

I was told parts were no longer available for this radio and cant not be worked on is this true .

Posted by on


1 Answer

You can send it into a factory authorized repair center, one is in TN that is highly recommended. This is an excellent radio if it has been adjusted properly and the factory mods have been done. Take a look at for full info on the problems with these radios. Do not take to a regular repair shop; this is a SMT design(surface mount technology) and requires thousands of dollars of equipment and expertise to work on. Trust me I tried to adjust mine and messed it up and had to wait to have them reset it. This radio is very difficult to work on and should be sent into a factory rep. Contact cobra for repair station.

Posted on Aug 10, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I had a repairman out and he told me I needed a circute board for the tv,but this part is no longer available and to junk the tv.

Most Repairmen are board level technicians, what you need is a component level tech, Keep looking, they are still there. I was a component service man for 25 years and a service manager, I should know.

Feb 21, 2013 | Toshiba Office Equipment & Supplies

1 Answer

Sound only making popping noice, to to Tv repair shot, said sound board bad and no parts available, The tv came in my 2009 RV cant be that old

Some parts may be not available to this section. The technician who told will be true. He may have asked this amount to repalce the sound card.

Mar 10, 2012 | Jensen Televison & Video

1 Answer

My 37" Vizio, only a little over 2 years old.

Might be true,might be not.These two websites have most of the tvs industries refurbishes electronic boards for the LCD and Plasma Tvs around.Tries websties, to buy a refurbish Main logic Tuner signal board for the replacement.

Nov 08, 2010 | Vizio L32 32 in. LCD HDTV

2 Answers

Bad lcd screen radio shack pro-92 hand held scanner

Do a google or yahoo search for gre america store. They may have the part you are looking for. If not they may be able to tell you where you can get the part. I know they carry parts for the pro 95 96 and 97.
Good Luck.

May 28, 2009 | Radio Shack Pro-97 Handheld Scanner

1 Answer

CAM broken

The information you were given is unlikely to be true, unless the part was no longer available (which would be pretty unlikely if the machine were new as you stated). If you can provide a model number AND an indication of what cam your repairman was referring to, I would be happy to check on that part's availability.

May 06, 2009 | Husqvarna Viking 1

1 Answer

I have two roof mounted master cools, I was told that these are no longer made. Is this true?

Yes it is true they are no longer made. But parts are still available for them as many HVAC units can swap parts. and you do not even have to go OEM to fix it if it is broken. A lot of Newer techs do not know how to work on these units

Apr 18, 2009 | Mastercool 67471 Evaporative Cooler Air...

1 Answer

Flyback is shot. Repairman says part is no longer made. True??

Well, I thought I could look up a replacement if you really wanted one. To answer your question, the original part is probably no longer available from the manufacturer. This is especially true for a small TV where the replacement cost for the whole set is pretty low. But if the set was a popular model or used the same chassis as enough other models, a replacement flyback might be available. So the tech was probably right.

Apr 07, 2009 | GE 27GT271 TV

1 Answer

Marantz CDR500 has record bay which no longer opens. I was told some time back that this is not repairable and that Phillips, who made the drive, no longer makes them so it is essentially a total loss. ...

This is a tricky one, because from the view of an authorized Marantz servicer, the replacement "part" is probably the entire drive which may no longer be available. It is possible that the true problem is that the main drive belt is slipping. In that case, replacing the belt will fix the problem. As long as the unit is not under warranty, any service shop should be able to attempt a repair. They can not make it worse and perhaps can resolve it cheaply.

Apr 06, 2008 | Audio Players & Recorders

3 Answers

URGENT Belkin F5X007*****Please Read!!!******

same thing happened to me and I had to take the radio back to Walmart...

Jul 22, 2007 | Belkin F5X007 XM Radio Receiver

Not finding what you are looking for?
Cobra 150 GTL DX Base CB Radio Logo

395 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Level 2 Expert

500 Answers

Brad Brown

Level 3 Expert

16806 Answers


Level 3 Expert

3289 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides