Question about Kenwood Car Speakers & Subwoofers

1 Answer

I have a kenwood 719 flip out monitor and i put a cd in it and the monitor says mecha error and won't let the cd come out. It just makes a bunch of noises. I pressed the reset button but that didn't work. The cd player is the only thing that doesn't work everything else is fine.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 108 Answers

You can try to push the CD in further with an object and then try ejecting (be careful not to break the CD!). Also, the soft reset button on the outside of the unit may not work, but disconnecting constant power (hard reset) may cause the CD to automatically be ejected when powered back up again. This can be done by disconnecting the negative battery terminal on the car for 15 seconds. If these don't work, visit a local Kenwood stereo dealer for service as this is a common issue with the 719 series and 819 series.

Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 5 keeps showing up when I want to play cd.


Go to your local store and buy a CD laser head cleaning kit. Usually has a single CD that has what looks like brushes attached to it... run that and it should clear up your "can not read disc" error. Also.. pay close attention to the media you are inserting. A lot of CD players can't read CD-RW media.

Mar 24, 2011 | Kenwood Car Speakers & Subwoofers

1 Answer

The error comes up after the deck tries to load the and play cd


if you can hear the cd spinning. it could be a dirty laser eye. if you have an older kenwood it has three lasers. make sure you always test with an original copy of a cd.

Jan 07, 2011 | Car Speakers & Subwoofers

1 Answer

Error 1 keeps coming up on my cd player how can I fix this?


error 1 means no information on the cd on kenwood radios can you ask the question again and give us more details

Nov 21, 2010 | Car Speakers & Subwoofers

1 Answer

Kenwood ddx7017 when i insert cd/dvd it reads mecha error


sound like disc read error. data on disc(cd or dvd) is not finallized, or not complete...or lense/lazer problems....TYPICALLY sound like a product defect!

Jun 23, 2009 | Kenwood Car Speakers & Subwoofers

1 Answer

Hi i have a kenwood cd player kdc-w7031 in my car which has started showing ERROR 05 whenever i put a cd into it have tried a head cleaner and still nothing any ideas thanks in advance


Are you sure that the model number is kdc-w7031? There is no such model listed on Kenwood's site. You can reach Kenwood here: http://www.kenwoodusa.com/Contact/

There are also phone numbers for technical support listed on this site as well.

Good luck.

Jun 24, 2008 | Car Speakers & Subwoofers

1 Answer

I have bought a kenwood kdc-241 car stereo i have downloaded my mp3 s onto cd-r (about 60 of them)when i put it into car stereo they play but no sound comes from the system (the radio sound is working also...


Hi i have just looked up your stereo and that kenwood doesnt support mp3 playback.
Unlucky mate.
In order to play a cd like that the head unit must support mp3 playback

May 30, 2008 | Kenwood Car Speakers & Subwoofers

1 Answer

Error 99


The E-99 code refers to a "Disc Mechanism Error" for all Kenwood systems. This essentially means that either the magazine is messed up (if you're using a multi-disk system) or the CD loader on a head unit is malfunctioning.

Per Kenwood's factor manual:
Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪ Check the disc magazine. And then press the reset
button on the unit. If the "E-99" code does not
disappear, consult your nearest service center.

May 28, 2008 | Kenwood Car Speakers & Subwoofers

1 Answer

I have a cd stuck in my kenwood kvt 719 head unit and the touch screen controls for the dvd are not appearing.


Have you tried hitting the "Reset" button on the head unit?

The procedure is on page 7 of the owner's manual under the heading "How to reset your unit"

Here's the URL for the Owner's Manual:
http://inform3.kenwoodusa.com/manuals/KVT-719DVD.pdf

Per the owner's manual, you're supposed to call Kenwood technical support if the display doesn't correctly reset or come back on and/or if the disc won't eject.

Apr 14, 2008 | Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Speakers & Subwoofers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Larry Spears
Larry Spears

Level 3 Expert

625 Answers

Are you a Kenwood Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...