Question about JVC Car Speakers & Subwoofers

1 Answer

Stero stuck on demo mode, cant remember how to turn it off. it is a jvc kd-g240

Posted by on

  • mouse6977 Aug 10, 2008

    Thank you very much

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 108 Answers

You will find the demo mode in the settings menu. It's options will be on and off and are reset to default each time power is disconnected from the unit.

1st, hold the "SEL" button
2nd, use the left/right arrows to select option "Demo"
3rd, turn the volume knob until "OFF" is displayed
Then, lastly, press the "SEL" key once more.

Here is a link to the pdf document for the instruction manual off the JVC website: http://books.jvcservice.com/Download/717497409/GET0485-001A.pdf


Posted on Aug 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you turn "demo"


Try holding in the SEL button for a couple of seconds and then use the next / previous track buttons to change between YES / NO

Aug 28, 2011 | Car Speakers & Subwoofers

1 Answer

How do you turn "demo"


press and holed the sel button untill it takes you to the "hidden Menu". scroll left and right with the volume nob.

Jul 01, 2011 | Car Speakers & Subwoofers

1 Answer

Have a jvc car stereo and cant turn off demo mode


If you press and hold the menu button the display will change into the main menu mode. Scroll to "DEMO" and click or press in button. You can then scroll to On or Off effectively turning off or on the demo mode.

Aug 24, 2010 | Car Speakers & Subwoofers

1 Answer

I'm unable to turn off the "demo" mode on a jvc KD-R210 car stereo. When I follow the directions on the instruction sheet "demo off" does not come up as an option. Any ideas?


hold your sel button until it takes you into your menu and use your track skip buttons till you get to DEMO and turn your volume knob to the left until it says off and then press select again to get out of your menu. :)

Jun 20, 2010 | Car Speakers & Subwoofers

1 Answer

How do I set the time on a JVC KD-S13 car stereo?


Press and hold 'SEL' button. DEMO is displayed. Use the up or down to select an item. Turn volume knob to set/adjust. The clock is next after demo. set hour then minute press SEL to finish. Reference page 3 in this link to JVC for your KD-S13 CD Receiver Instructions.
http://books.jvc.com/Download/975469902/GET0400-001A.pdf

Dec 27, 2009 | JVC Car Speakers & Subwoofers

2 Answers

Stuck in demo mode. how do i change it?


Hello jayme84,

To cancel "DEMO" mode on the JVC:

Enter the PSM (personal settings mode) and turn DEMO off.

1) Press and hold "SEL" until the display changes.
2) Use the left/right rocker switch until "DEMO ON" is displayed.
3) Turn the volume knob to select "DEMO OFF".
4) Press "SEL" to exit.

Hope this helps.

Apr 28, 2009 | Car Speakers & Subwoofers

1 Answer

How do i take unit out of demo mode and set clock?


hold your sel. buton you use to get to bas, mid, and treble, and hole it down for a while till a new menu pops up. scroll using up/ down buttons till you see demo and left right changes the setting for it

Apr 27, 2009 | Car Speakers & Subwoofers

1 Answer

HI,I INSTALLED MY DEH-6500 PIONEER RADIO,CAME ON DEMO MODE,PUT CD IN VOLUME WORKS BUT CANT CHANGE SONG ON CD,TOOK CD OUT,BACK TO DEMO MODE WHERE I CANT DO ANYTHING,CAN YOU HELP GET ME OUT OF DEMO MODE...


Feature demo
The feature demo automatically starts when
power to this product is switched off while the
ignition switch is set to ACC or ON. Pressing 6
numbered button during feature demo operation
cancels the feature demo mode. Pressing 6
numbered button again to start the feature
mode. remember that if the feature demo continues
operating when the car engine is
switched off, it may drain battery power.
Notes
• You cannot cancel a demo mode when the
front panel is open.
• The red lead (ACC) of this product should be
connected to a terminal coupled with ignition
switch on/off operations. If this is not done,
the vehicle battery may be drained.

Apr 26, 2009 | Car Speakers & Subwoofers

1 Answer

While testing before final installation of the JVC KD-G240 CD Player, the only power I can get is to eject a disc and temporarily display the time. I cannot turn the unit on. After pressing the reset...


This is an indication that the "ACC" line is not getting the 12 volts to turn on the radio. Check the fuses, it may have blown one. The "ACC" is the red wire that comes off the back of the radio harness. It needs a 12 volt supply when the key is turned on for the radio to work properly. When this is missing, you will have the conditions you have described. The yellow wire is for a constant 12 volts even when the radio is off and the car is off. Since you do get the eject and the clock display you have a good ground, so that is not an issue. You just need to find out why you do not have the 12 volts on the red wire when the key is turned on in the car.

Dec 10, 2008 | JVC Car Speakers & Subwoofers

Not finding what you are looking for?
Car Speakers & Subwoofers Logo

Related Topics:

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Speakers & Subwoofers Experts

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Car Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...