Question about Samsung RS2630SH Side by Side Refrigerator

1 Answer

Fan/motor - repair

Thanks for your help.  I have a couple more questions; 1) how can i find the parts? 2) do i have to order a shop manual?
thanks again, Jim

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

How you doing? first find your part # on the part that you are tryng to replace, then if you are calling an appliance repair store they will ask you for the maker of your fridge your model # sometimes the serial # and the part # for the part you need then they will either give you an immediate pricing or call you back.No need to order shop manual if your comfortable working safely on your appliance, installation is reverse of dissassembly
For internet orders same thing make,model,serial#, part#.(REMBER TO UPLUG APPLIANCE BEFORE SERVICING, OR IF YOU ARE NOT COMFORTABLE WORKING ON APPLIANCE CONTACT A PROFFESIONAL REPAIR SERVICE..)Good luck be safe..

Posted on Aug 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The Cooling fan of my HP/Compaq Presario CQ60 sounds like a jet fighter! 2 questions 1) Replacement CPU cooling fan? 2) Can anybody give me pointers on how to get in to the laptop? I have tried blowing...


Hi,
Presario CQ60 Repair Manual
From the above link from HP Official Support you can download the service/repair manual for instructions and photos for dis-assembly. Refer to "Fan/heat sink assembly" on page 4-41.
At page 4-7 onwards, you would find the instructions about opening the laptop.
INSTRUCTIONS & PHOTOS
Follow the instructions carefully and remove the Fan/ Heat Sink and Clean it using a tooth Brush.

Let me know if any further clarification/ assistance is required.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Jun 09, 2011 | HP Compaq Presario CQ60Z Notebook

2 Answers

When replacing the fan impellar on the kirby generation what is the order of the bushings that comes with the kit


Hello,

I've shot a very helpful video walking you through step by step on how to replace the impeller blade on a Kirby Generation vacuum cleaner.

The exact answer to your question should be contained in the Part 2 of the video.

Part 1;



And the second and final part;



I hope this was helpful to you, and was able to answer your questions. If you have other questions, or still need help, please feel free to use the comment field at the bottom, I"m always more then happy to answer any questions you may have. If you found this to be helpful, please be sure to rate my repair helpful, or leave feedback for me.

Thanks so much,

Chris Jones
GoVacuum.com

Jan 07, 2011 | Kirby Generation 3 Bagged Upright Vacuum

1 Answer

Th end of the shaft that come from the motor is worn out, and won't hold the belt well. How do I change it?


Hello,

Thanks for the clarification. I have never seen this problem previously in a Kirby. I wonder if the belt keeps sliding off because it's been stretched out? After about 1-2 years, the belts on the Kirby will stretch out to a point where there can possibly slide off the motor shaft. Have you tried just replacing the belt on the unit first?

If you're sure that it's not the belt that may be stretched out, and you'd like to replace the motor shaft, you certainly may do this. The only problem with this is the motor shaft is not sold by itself as a separate part. The only way to purchase this motor shaft is to purchase the entire fan assembly, which includes a new fan, and the hardware necessary on the fan assembly.

Here's a parts diagram that shows you the motor shaft is sold only in a completely assembly:
http://lib.store.yahoo.net/lib/vacuumcleanerbacgs/kirby-generation-parts-diagram.pdf

If you haven't already purchased the motor shaft, here's a direct link to the motor shaft and fan assembly on our website:
Kirby Generation Fan Assembly With Motor Shaft and Hardware

In terms of installing it, we've actually recorded a video repair on how to replace the fan assembly, which involves removing the motor shaft in order to get the fan off. Since you have to purchase the fan assembly anyways in order get the motor shaft, you may want to go ahead and replace your fan assembly at this time also. Even though your fan may not be broken, on Kirby's the fans can become coated with dirt and fine dust, which can sometimes lead to the Kirby exhausting a bad smell. If you'd rather not replace the fan, you may remove the motor shaft without disassembling the entire machine, you'll just need to secure the fan somehow so that the fan doesn't spin while you're using a nail to turn the motor shaft off.

Anyways, here's the video repair that we recorded. I hope that this helps you. If you found this helpful, please kindly rate my repair helpful by clicking the thumbs up icons in the top right hand corner of the repair. This is really what keeps Fixya repair professionals continue to give free repairs online.

Here's Part 1 of the video:




Here's Part 2 on Replacing the motor shaft and fan:


If you have any follow up questions, I'd be more then happy to answer them for you, please just add another comment here on the repair page, and I'll be more then happy to answer any follow up questions that you have. Thanks again for rating the repair, I greatly appreciate this.


Chris Jones
GoVacuum.com

Apr 15, 2010 | Kirby G5 Bagged Upright Vacuum

1 Answer

Broken elevating rack


Please contact your manufacturer for parts. FixYa.com dispenses advice ... not sell parts.

Thanks for your question

Jan 20, 2010 | Shop Fox W1670 1/2 HP Floor Radial Drill...

1 Answer

KENMORE WASHER FAN BELT REMOVAL AND Repalcement. I would like to see if there's instruction for removal and replacement of the fan belt. Thank you


Hello, from the limited information I have this sounds like it's going to be a broken coupling. Kenmore's, Whirlpool's and Ropers are direct drive machines this means they don't have a fan belt. Instead the transmission is connected directly to the motor via a coupling. This is what a coupling looks like: 0c6b869.jpg To confirm this pull the machine forward enough that you can lean it back and it will stand back under it's own weight. Wedge something underneath the chassis so it does not fall on you while your accessing the bottom. Go under the Machine and locate the motor, You will see the pump connected to the motor connected to the transmission. 1. Unplug the wire harness from the motor then. 2. Use a screw driver remove the 2 clips holding the pump in place and remove or push the pump out of the way. 3. You will need to remove the 2 screws from the brackets holding the Motor in place with a nut driver. 4. With a screwdriver remove the 2 clips holding the motor in place (be careful to support the motor as the clips comes off) 5. remove the motor and drop it onto the floor. Now you will see the coupling..one side on the motor the other side on the transmission the rubber connector in between. Replace the coupling if broken or worn and reassemble the washer in reverse order. Now you should be all set. Be aware you may smell rubber on the first couple loads this is normal after replacing a coupling. Good Luck!! if you have any other questions or concerns please feel free to comment again. Mike p.s Please remember to rate my solution since this helps me to help other people :) Thanks! P.s Don't forget to unplug the power cord before servicing.

Nov 03, 2009 | Kenmore 22422 Top Load Washer

1 Answer

My GE refrigerator evaporation fan turns on and off intermittently. If I unplug the refrig for a while and plug in again, it will run normally for a couple of days. Then the problem will come back again....


This problem is related to a few possibilities. The fan motor is defective, or the control board relay has become defective. At this point I am comparing this model against the GE Profile Repair Manual to get you some test points to check before we change anything. The part number for the fan motor is WR60X10185
I will be back as soon as possible to help answer the question and give you more informed advice. Thanks, Sea Breeze

Jun 17, 2009 | GE Refrigerators

2 Answers

Burning smell kenmore canister


Had a burning smell coming from the vacuum. Opened it up and noticed sparks in the motor area. Ordered a new motor from Sears and replaced it. Works great now.

Mar 04, 2009 | Kenmore Vacuums

3 Answers

Whirlpool washer agitator not turning


hi there,

can you provide me with the model # please?

most older machines have only a 1 piece agitator but the newer machines are a 2 piece.

let me know and i will try and help you put it back together.

thanks

Sep 28, 2008 | Whirlpool Washing Machines

1 Answer

How to change a belt on model no. 110.22882101


Hi thanks for your question. the part you need is called motor drive coupling, it attaches to the motor and the transmission. the cabinet has to come off in order to get to the part.if you need assistance in replacing this part. lets chat and i will guide you. thanks

Sep 27, 2008 | Kenmore 22422 Top Load Washer

1 Answer

The blender coupling on my oster snapped in half. I have the replacement part already I just cannot figure out how to get the broken coupling off the base of the motor. I also got a replacement square...


10-01-2009 Sara - see solution for rlaymon 1-9-08 "Top part of base broke off" by TanyaCS on 1-20-08 - good ideas. I just fixed mine - 2 hour job + half hour to put a new cord in. Like TanyaCS my broken coupling was rusted to shaft - used WD-40 twice and let sit - meanwhile took out motor and removed fan - kept screws and washers in order on workbench (kitchen counter) - the fan hole is "D" shaped - fan end of shaft also "D" shaped - I filed a "flat" on the other side of the factory "flat" (side of 'D' that is straight) - Used big pliers on broken coupling and adjustable wrench on on the "flats" on fan end of the shaft. Broken end came right off. New cord is 18 gauge extension cord capable of at least 6 amps. Cut off the un-needed end. Or order a replacement cord $4 when you order the rubber drive coupling $4, pin with slinger washer $3. Bet you also need new rubber feet - didn't buy for mine - wish I had. Bert

Jul 11, 2008 | Oster 465 Work Top Blender

Not finding what you are looking for?
Samsung RS2630SH Side by Side Refrigerator Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4638 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Are you a Samsung Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...