- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
go to the cross menu bar, go to settings, then scroll down to accesory settings, select it and then choose manage bluetooth devices. then change the settings of your mic from there. or refer to your instruction booklet that will tell you how to adjust the volume of your mic. please rate my solution, good or bad.
Here ya go. please remember to leave me a positive rating and a testimonial really helps!!
1. CompatibilityThe PS3 supports only one headset at a time. Multiple players on the same console will have to share. Bluetooth:
PS3 uses Bluetooth version 2.0, and is compatible with all earlier
versions (1.0, 1.1, 1.2). 2009 may see version 2.1 Bluetooth headsets
hit the market, so you will have to try it for yourself on PS3.
All brands of Bluetooth headset should work with the PS3.
USB: USB (wired) Headsets can also be used with the PS3.
Any of the PS2 compatible USB headsets should work with PS3 games.
USB headsets are required for PS2 software used on the PS3.
Not Compatible with Bluetooth Stereo Headphones:
Bluetooth audio signal for PS3 only carries voice chat. The game sounds
and music are played through your TV or stereo receiver only.
If you want to listen to the gameplay with headphones then they will have to be compatible with your TV or stereo receiver.
2. Setup A Bluetooth headset has to be registered, or "paired", with your PS3 before it can be used.
Make sure your Bluetooth headset is fully charged before you begin.
your headset instructions for entering "pairing mode". Activate your
headsets' "pairing mode" so it can be recognized by the PS3.
the Cross Media Bar (or XMB) of the PS3 go to the "Settings" tab, then
down into "Accessory Settings", then down into "Manage Bluetooth
With your headset in pairing
mode, follow the onscreen instructions and let the PS3 scan for your
headset. When your headset is found, follow the prompts and enter a
pass key (if necessary- the default is usually 0000 for all brands).
The pairing should now be complete.
you're using a USB (wired) headset, just plug it into one of the ports
on the front of the PS3 (the system should auto-detect the USB headset).
Mic Test and Volume Setting After
pairing a Bluetooth headset, or after plugging in a USB (wired)
headset, return to the XMB. Go to "Accessory Settings" and choose
"Audio Device Settings". You can test your headset here.
headset should appear as the audio input/output device. If not, just
use the D-pad to highlight the Input line, then scroll until you see
yours. Any microphone you have used with your PS3 will be listed, but
only the current one will be available to select.
Set the "Microphone Level" to 3. You can change the level any time if needed.
Speak into the headset, and the level bar at the top of the screen should move at the sound of your voice.
You can also view a list of Bluetooth accessories you have registered in the "Manage Bluetooth Devices" tab under "Settings". If your mic doesn't appear there then try pairing it again.
There are more ways to configure the audio input and output that can be useful:
the input to (your mic) and leave the output on (default)- one person
can chat with the other players, and the replys will play over your TV
speakers rather than into your mic. Great when sharing one console
because everyone can hear the team talk.
the input and output to (default)- you will hear the game sound and
voice chat through your TV speakers but won't be able to talk back.
Great if you don't have a headset, or if you want the room to hear the
Set the output to (default)
to use stereo headphones with your TV or receiver. Then set the input
to (your mic) and you can chat while wearing stereo headphones. Keeping
the mic close to your face could be a problem since both ears are
already taken! You could try a USB desktop mic and see if that works.
General: If you are having trouble with a headset after it is paired with the PS3, there are a few things to check first:
sure your headset battery is charged and working. Be aware that some
brands/models will need to be paired again after each recharge. It's
not a problem, it's just the way those models work.
sure your controller is charged. Lots of strange things happen when the
controllers don't have enough power, like dropouts and headset
The headset should be set as the input/output device from the XMB.
Bluetooth users, make sure there are no other Bluetooth devices in use
near your PS3. Also try to eliminate any other radio frequency
interference if possible.
For USB users, make sure the connection is secure and there are no wire breaks.
Update your console to the current available firmware.
the PS3 cannot locate your headset, make sure that your headset is in
pairing mode before you start scanning. The headset instructions will
tell you how to set yours to pairing mode.
your headset is missing from the device menu after you re-start your
PS3, you will have to pair again. Many headsets will only "remember"
one device at a time, so you may have to register again after using
your headset with a phone.
headset appears on the Audio Device menu but is "grayed out" or not
selectable, it is not connected. Make sure the headset is charged, and
that it is on in standby. I should connect automatically when the Audio
Device menu is selected. Tap the call button on the headset if it does
not connect, or click on the Connect Bluetooth tab on screen.
Make sure no other Bluetooth devices are in use nearby.
Voice Chat Drops:
in-game voice chat drops are simply network lag. Usually they go away
after a short time, so be patient. In extreme cases you may have to
leave a game and return to reset the chat function.
you use wireless internet, a low signal strength to
your modem/router can make voice chat malfunction. Make sure your
wireless signal is as strong as possible to your access point.
Sometimes a headset will quit after changing discs to another game. Go to accessories and select your headset again.
Make sure no other Bluetooth devices are in use nearby.
4. Playstation 3 Links and Customer Support:
Playstation 3 Support Page- all the official manuals and tips in one place. You can also contact customer support via email from this page.
I believe only voices from other players come through on the headset. Other game sounds (cutscenes, gun shots, explosions, etc.) come through the TV. Try checking the Chat or Accessory settings on your PS3 to see if there's an option to change where the sound comes from. It'll be in the PS3 dashboard (press the PS3 button on your controller). I hope this helps and don't forget to rate. Good luck and thank you!
Press the xbox button on your controller, and select "Personal Settings". Now select "Voice".
Be sure that the volume is turned up to your liking, and also make sure that the "Voice Output" choice is to your liking as well.
I dont mean any offense by this, also make sure that your headset is plugged in all the way with the volume up, or connected properly if you use a wireless headset.
It is also possible that these people may be muted in the recent players/friends list. All you would need to do is bring up those lists, and select the player... The bottom choice on that screen should be mute/unmute.
If you can't hear other people it might have to do some router settings. I know you have to have the remote that comes with the original earphones. so plug headset into remote then plug remote into psp. I don't have the remote and I hear people but my mic doesn't work. Hope that helps.