I lost my receiver for logitech wireless keyboard and mouse.what will i do to use it again...please help....

You can change the batteries, then push the connection button on the back of the keyboard, also, download the logitech software to help get it set up.

Not possible. If you can get another receiver then you may be OK.

• Check to ensure that the wireless receiver is plugged into your computer. Press the "Connect" button on the bottom of the receiver to attempt reconnecting your mouse and keyboard to the computer. If your mouse and keyboard use Bluetooth, ensure that your computer's Bluetooth is active and detects the mouse and keyboard.
• Check to see if the keyboard and mouse are turned on. If the power indicator lights on the keyboard and mouse are not green, press the "Power" button to turn the keyboard and mouse on.
• Check the batteries of the mouse and keyboard. If the batteries are dead, replace them with fresh batteries and reconnect the mouse and keyboard to the computer by pressing the "Connect" button on the bottom of the wireless receiver attached to the computer. If your mouse and keyboard use rechargeable batteries, let the batteries recharge before using the device again.
• Uninstall and reinstall your wireless keyboard and mouse drivers. Sometimes, the Logitech drivers are at fault for a bad connection. Use the Control Panel to uninstall the old drivers, then visit the Logitech website and install the latest drivers for your keyboard and mouse.
• Search the Logitech Support Database. If your keyboard and mouse are still failing to function properly, visit the Logitech Support website and browse the support page for your product for specific solutions.

have you tried pressing the button on the back of the receiver then press the button on the bottom of the mouse, then press the button on the back of the receiver again and press the red button on the back of the keyboard

You are using wireless keyboard and wireless mouse, so all you need to do to activate them is to connect the receiver to the computer install the software and press the button on the mouse and if the receiver also has button press it also and you need to make sure that you have battery in the mouse/keyboard once you follow these steps your should work fine.

Search the web for a receiver for your mouse is about all I can suggest. You might want to start with E-bay or other auction sites. Best of luck on this quest.

Not even Logitech could help you with a lost component without which the system won't operate unless you can directly wire the keyboard with the mouse wired (wait a minute, neither has wires, do they) to the desktop.

Here are your options:

1.New wired Keyboard and Mouse:
2.New duplicate of what you had, with careful shoppiing to make certain that the same channels are useful to your receiver (of which you will have one) while you have two KBs and Mice addressing one
receiver for dual control of one desktop which is exactly why one purchases a KBR.
3. Purchase, if available a new receiver from Logitech.

My choice of the above options is Door #2

Not much info to go on but this might help.
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

As a rule the mouse is matched to the keyboard and a new mouse probably wouldn't work with the receiver.
Try this:
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch.
Hope this helps you. Bud

Contact Logitech