Question about Lexmark X1270 All-In-One InkJet Printer

1 Answer

Will not come on

I am pressing the on button and my printer is not turning on. what could be the problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 564 Answers

Well..is this still an issue?


Posted on Aug 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change language settings on my Dell V313 printer


Incorrect language appears on the display

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:


CHANGE THE LANGUAGE USING THE PRINTER MENUS


1 From the printer control panel, press .


2 Press the arrow buttons to scroll to Defaults, and then press .


3 Press the arrow buttons to scroll to Set Defaults, and then press .


4 Press the arrow buttons to scroll to Use Factory, and then press .


5 Complete the initial printer setup.


CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT LANGUAGE)


1 Turn the printer off.


2 Press and hold down and , and then press to turn the printer on.

The printer resets and starts the initial printer setup.


3 Complete the initial printer setup.
HANGE THE LANGUAGE USING THE PRINTER MENUS
1 From the printer control panel, press .
2 Press the arrow buttons to scroll to Defaults, and then press .
3 Press the arrow buttons to scroll to Set Defaults, and then press .
4 Press the arrow buttons to scroll to Use Factory, and then press .
5 Complete the initial printer setup.
CHANGE THE LANGUAGE USING A BUTTON COMBINATION (IF YOU CANNOT READ THE CURRENT LANGUAGE)
1 Turn the printer off.
2 Press and hold down and , and then press to turn the printer on.
The printer resets and starts the initial printer setup.
3 Complete the initial printer setup.
Printhead error

Apr 22, 2013 | Dell V313w AllInOne InkJet Printer

Tip

HP Office Jet All in One : Resetting Steps


Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.


Regards,
Rizwan


on Jan 19, 2010 | Printers & Copiers

2 Answers

How can i fix error 5200 on my canon pixma ip2770


Hi there,
You can try the following 1. Turn off printer, cable power still plug in,
2. Press Resume Button don't release
3. Press Power Button don't release and than release Resume Buttons
4. Press Resume Button 6X
5. Turn off printer cable power still plug in
6. Turn on printer again, now this printer ready to use.

Or try

1. The printer is turned off and plugged the power cord.
2. Press Resume button 2 seconds
then press the POWER button until the green light on (when pressing the POWER button, Resume button ... jgn released first)
3. Then release the RESUME button, but do not release the POWER button.
4. While the POWER button is still depressed, press the Resume button 5 times. Led will light turns green orange with the last glow orange. (do not be mistaken 4x because the printer will die completely, but it is temporary too) Then ...
5. Release both buttons simultaneously.
6. Led will blink briefly and then will glow GREEN.
7. And the computer will detect new hardware, just ignore ...
8. Press the POWER button, then the printer will die.
9. Press the POWER button again then the printer will flash and ... IP2770 Printer is ready to use

Jul 27, 2011 | Canon Printers & Copiers

1 Answer

When I turn my hp g85 on,I get the following message:initializing,then a sound then press enter to allign cartridges then the printer flashes off &on and turned off by its self.


Hi,

Please try below resets

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "Enter" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.
Regards
Riztech

Oct 30, 2010 | HP OfficeJet G85 All-In-One InkJet Printer

1 Answer

MY HP OFFICEJET 6 310 ALL IN ONE INKJET PRINTER IS FLASHING RESET POWER


Hi,

Please follow below resets.

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.


Regards,
Riztech

Oct 24, 2010 | HP Officejet 6310 All-In-One InkJet...

1 Answer

Officejet 5610 All-In-One InkJet Printer: error 0xd0620130 reset power...


Hi,

Please try the below resetting steps

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.


Regards,
Rizwan

May 07, 2010 | HP Officejet 5610 All-In-One InkJet...

1 Answer

Worked yesterday, now will not turn on!


Hi,

  • Try connecting the printer directly to wall outlet without surge protector.
  • If the problem exists reset the print, see below steps to reset it.
Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

Regards,
Riztech

May 02, 2010 | HP Photosmart 3210 Printer

1 Answer

How can I "reset" the hp 7130 printer


The below are types of reset for HP Officejet printers, starting from smaller resets to bigger one.

Power Drain:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.


Regards,
Rizwan

moz-screenshot.pngmoz-screenshot-1.png

Feb 13, 2010 | HP Officejet 7130 All-In-One InkJet...

1 Answer

How to reset a Photosmart C5180 All-In-One InkJet Printer


Hi,

The below are different types of reset for your printer.


Power Drain
:

  • Turn OFF the printer, disconnect the power cable from backside of the printer and from wall outlet.
  • Press and hold the Power button for 60 seconds.
  • Connect the cable and turn ON the printer.

Partial Reset

  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "3" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.

Semi-Full reset


  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "#" and "6" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

NVM Reset

  • Remove the ink cartridges.
  • Remove the power cable from back side of the printer while its ON.
  • Press and hold "OK" and "Cancel" button, while holding them both insert the power cable and release the button after 10 seconds.
  • If printer turns OFF, press power button to turn it ON.
  • Insert the ink cartridges.

Thanks & Regards,
Rizwan.

Jan 31, 2010 | HP Photosmart C5180 All-In-One InkJet...

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...