Question about Nintendo Wii Console

1 Answer

Wii fit Hi can i sync 2 balance boards to 1 wii

Posted by on

  • 3 more comments 
  • cazza7 Nov 09, 2008

    I am trying to synchronise a replacement wii fit without any success - any ideas?

  • normangill10 Dec 02, 2008

    We have the same problem, we synchd a friends board to our Wii during the summer to try it out and now we can't synch the one we have bought for our kids christmas - help!!

  • Chester37 Dec 13, 2008

    Nintendo really needs to address this issue, I bought 2 Wii Fit kits because my husband and I want to exercise together...who wants to exercise alone?

  • joseph19 Jan 03, 2009

    i borrowed a wii fit (board) to see if i liked it, bought one but cant syc, because it only takes one, pls find the answer

  • Zebar Jan 18, 2009

    A friend fitted his wii fit board to our wii for us to try it out and we are not trying to set up our own wii new fit board but it will not synchronize?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Unfortunately, you can only have 1 Fit sync'd to a Wii. I don't know if they'll be changing it, but hopefully they do. Not much fun when you have to rotate 4 players instead of playing them 2 or more at once.

Posted on Aug 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to configure gameon balance board with wii console


Hello,

1. You need to put Balance Board compatible game disk in the console.
2. Select Disk Chanell and press Start
3. Remove SD Card slot cover on the console and the battery cover on the Balance Board
4. Press and hold for 2-5 sec the SYNC button on the Balance board. You will see a blinking light.
5. Press the Sync button on the Wii console and after a while you will get non-blinking light.

This will mean that your device is synchronized and you are able to use your Balance Board.

Good Luck!
Don't forget to close back the covers you've removed earlier.

May 23, 2012 | Nintendo Wii Fit - Balance Board + Game...

1 Answer

How can i re connect the wii fit balance board to my wii ?


Synching can be completed only if a compatible game disc is running in the console. Compatible game discs (such as Wii Fit) will display the Wii Balance Board icon on their packaging.
The Wii Balance Board must be synced to each compatible game individually.
These sync settings will be saved even after the console is turned off.

Follow these directions to sync the Wii Balance Board (so that it is recognized by the Wii console):

Insert a Wii Balance Board compatible game disc (such as Wii Fit) in the Wii console.


Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game.

Open the SD Card slot cover on the front of the Wii console.

Remove the Battery Cover on the bottom of the Wii Balance Board.

Press and release the SYNC button on the Wii Balance Board. The Power LED on the board will start blinking.

Press and release the SYNC button on the console while the Power LED on the board is still blinking.

The Power LED will stop blinking and light steadily once the synchronization is complete.

Mar 16, 2011 | Nintendo Wii Console

1 Answer

How do you sync the wii console and wii fit board


Put the Wii Fit game disc in the Wii and start the game. Then open the small SD Card slot cover on the front of the Wii console then remove the battery cover on the bottom of the Wii Balance Board. Press and release the SYNC button on the Wii Balance Board. The light on the board should start blinking. Afterwards press and release the red SYNC button on the Wii console while the light on the board is still blinking. The light on the balance board will stop blinking and stay on steady once the syncronization is successful.

Mar 03, 2011 | Nintendo Wii Console

2 Answers

How do you sync the wii fit board and wii console


  • Put four AA batteries into the battery housing located on the underside of the Wii Balance Board.

  • Insert a Wii Balance Board compatible game into the Wii system.

  • Select the "Disc Channel" on the screen with the Wii remote, and choose "Start."

  • Open the SD card slot to reveal a sync button on the Wii system. This is located behind a cover under the power and eject buttons.

  • Turn the Wii Balance Board upside down.

  • Remove the battery cover under the balance board to reveal another sync button.

  • Pres the sync button on the balance board, then press the sync button on the Wii. Do not hold down the buttons. You know it is synchronized when the blue light on the Wii Balance Board stays steady

  • Place the board on a flat surface directly in front of the TV. Face the power button away from the TV.

  • Mar 03, 2011 | Nintendo Wii Console

    1 Answer

    I can not re start my nintendo balance board,


    1. Insert a Wii Balance Board compatible game disc in the Wii console.

    2. Use the Wii Remote to select the Disc Channel from the Wii Menu, then select "Start" to begin the game. Press the A Button to bypass the wrist strap screen.

    3. Open the small SD Card slot cover on the front of the Wii console.

    4. Remove the Battery Cover on the bottom of the Wii Balance Board.

    5. Press and release the SYNC button on the Wii Balance Board. The blue light on the board will start blinking.

    6. Press and release the red SYNC button on the Wii console while the blue light on the board is still blinking.

    7. The blue light will stop blinking and stay on steady once the syncronization is complete

    Dec 20, 2010 | Nintendo Wii Fit - Balance Board + Game...

    2 Answers

    My wii balance board keeps telling me to step off and press A, while I am not on it.


    Give credit to GKC on justanswer!!
    The exact procedure is:

    • Even if the battery level is strong, try the following:

    Remove the batteries in the Wii Fit Board for at least 1 minute……

    Try these steps!

    1 Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

    2 Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

    3 After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

    a With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    b Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    c Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

    d When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

    4 Start the game from the Wii Menu, then sync the Wii Balance Board from the opening screen of the game.

    Read more: http://www.justanswer.com/questions/1t6qc-my-wii-fit-keeps-saying-to-step-off-and-press-a-even-though#ixzz0t3Vvd9Af

    Jul 08, 2010 | Nintendo Wii Fit - Balance Board + Game...

    1 Answer

    Wii fit board won't work


    Hello,

    Here you have different procedures on what to do if you get that error message. Please get back to me if nothing works.

    The exact procedure is:

    • Even if the battery level is strong, try the following:

    Remove the batteries in the Wii Fit Board for at least 1 minute…… better 15

    Try these steps!

    1 Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.

    2 Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.

    3 After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:

    a With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.

    b Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.

    c Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).

    d When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).

    4 Start the game from the Wii Menu, then sync the Wii Balance Board from the opening screen of the game.

    Hope it helped.

    Nov 24, 2009 | Nintendo Wii Fit - Balance Board + Game...

    1 Answer

    Wii fit wont turn on


    Have you tried to Re-sync?

    1. Start the game from the disc, and wait it to run.
    2. Press the sync button on the wii fit balance board.
    3. Press the sync button on the wii console.

    Some people say that holding the wii console sync button for 7 seconds works best.

    Dec 06, 2008 | Nintendo Wii Console

    2 Answers

    Wii fit balance board


    You need to sync the balance board with the console. Instructions are in the manual. Sync button for board is in battery compartment and sync button for console is in panel under reset button.

    Took a few tries for me, be carefule not to hold sync button on console down for longer than 10 seconds because it will deregister all wii remotes.

    Sep 09, 2008 | Nintendo Wii Console

    Not finding what you are looking for?
    Nintendo Wii Console Logo

    Related Topics:

    69 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nintendo Video Game Consoles Experts

    Troy Gorman
    Troy Gorman

    Level 3 Expert

    508 Answers

    phil

    Level 2 Expert

    567 Answers

    Raj Patel

    Level 3 Expert

    845 Answers

    Are you a Nintendo Video Game Console Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...