How to install Windows 7 OS with a recent Window xp OS using usb sandisk cruzer

Windows XP, Vista , or Windows 7 should be able to automatically detect and install it. Try using it on another computer that has either Windows XP, Vista , or Windows 7 on it. If it doesn't automatically detect and install it on that one then the flashdrive is dead.

If you have an older operating system then go here to download the driver:
http://www.sandisk.com/sandisk-support/driver-download-wizard

Both Microsoft and SanDisk stopped support for Windows 98 (that is the 1998 version of Windows) in the middle of 2008 (two years ago). So, if Windows 98 does not recognize the "plug-and-play" device (manufactured since the middle of 2008), then you'll have to upgrade your computer to Windows XP or Vista or 7, or use an "older" flash-drive that Windows 98 did support.

which OS u r using? XP,Vista and 7 Os will automatically install the drivers for it.

if not, check sandisk site for drivers

If it is a windows xp, can be somethig with OS. Try with some other computers onn Windows 7. Not working then also???? Its damaged!

I would like to point out that this must be something the u3uninstall utility did to the usb stick. Mine was working at full speed while I had the U3 stuff on there, and stopped working at full speed in both windows 7 and ubuntu 10.04 after I used the tool. Sorry this isn't a solution, but it's additional info. It's strange it makes it seem like the problem is your OS or drivers and not the usb stick itself, or what the u3uninstall utility did to it.

Cruzer Micro is an USB external memory where you can store files.
It is automatically detected and installed on all Windows OS from Windows 2000 onward, same on Mac OS and recent Linux versions.
All you have to do is plugging the device into USB.
After the flash drive had been automatically installed , it will be displayed under Computer as an external disk.
You can copy and transfer files using Cut, Copy and Paste functions, or Send to function in windows, or the file manager, depending on the OS used.
In Windows, before unplugging the memory from USB , it is better to turn off the computer or use the 'safely remove USB' function located near to the clock, on the lower right hand corner.

Read also the documents below:


Introducing the Cruzer Micro

Find Answers || BeCompliant Corporation


How to Use Sandisk Cruzer Flash Drive

Have you tried installing the driver for it on your computer?

i have a 16 gb pendrive which is detected in my mac but not in any windows...............help me out here

Is the account that your tying to access the drive with an Administrator account? If not, Log in as Administrator and try to access the new drive. If you ARE using Administrator privileges on the vista machine, the problem lies in the U3 smart driver. Try downloading and installing the drivers for the XP SP2 os on scan disks website, If vista rejects the install package off of the scan disk website, let me know and i'll extract the drivers and build an install for them for you.

May be you should Re-install your USB Drive, use USB installer and re-install it!