Question about AT&T BlackBerry Curve 8310 Cell Phone - Red

1 Answer

Blackberry 8310 just got a blackberry 8310 red with no sim card ive charged the phone with the battery in but it wont switch on its just showing a battery with a red line going through can u help

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

This usually means the bb and battery got a little wet or has other issues. Try these solutions in order. They go from easisest to hardest. NOTE: If you have an insurance policy on the bb probably best just to take it in.

1. Remove the back cover. Remove the battery and the SIM card. Wait 30 seconds. Replace SIM, battery and back cover. Reboot. Plug in the bb and charge fully.

2. If that doesn't work, allow the bb to remain unplugged but ON for about 24 hours to drain the battery. Remove back cover and battery. Allow battery and opened bb to sit in a dry environment for 24 - 36 hours. Relace battery and cover. Reboot. Plug in the bb and charge fully.

3. If that fails, try another battery (a friends or one from your cellstore) to see if tat's the problem. If so, (a) retry step 2 but allow battery to FULLY drain then dry out again, (b) buy a new battery for $60 retail or (c) buy a new battery on ebay for a lot less.

4. Take in.

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Im getting a initialization failure error, its not the SIM card, i switched SIM cards with another phone. i have AT&T but on the phone it says my mobile network is T-mobile. i already tried application...


Your phone still locked only for T-mobile network, that's why you got error message when you change your sim card. You must unlock your blackberry using blackberry curve 8310 unlock code for T-mobile network. Blackberry unlock code can be obtained from your network provider in this case T-mobile or you can buy from third party sites. Both of them will take you some charge but third party sites have lower cost and quick delivery service rather than network provider.

Jul 07, 2011 | RIM BlackBerry Curve 8310 Smartphone

1 Answer

Can you help me please i have a blackberry 8310 and ive move to england now and i need help with my phone i have been told i need a mep code to make it work i have my imei number which is...


Hello Laura, are you going to change your old sim card with england network sim card? if you want doing that you need blackberry curve 8310 unlock code and it's can be obtained from online blackberry unlock code seller. However if you just want to know how to read your mep code try to visit this link and follow their instruction. Thank you i hope my solution can help you.

Apr 16, 2011 | AT&T BlackBerry Curve 8310 Cell Phone -...

5 Answers

I unlocked my blackberry 8310 and i put in my softbank sim card and i have no service in yokosuka, japan


Hello

This unlock code provider generate full LEGAL unlock code direct from Blackberry server which wont void your warranty, & generate code based on your IMEI, means individual code for every blackberry set.
After unlocking from this provider's code your blackberry not only work with single network, you can use your Blackberry in any part of world with any network including your browser & MMS picture messaging to work, yes with just one time entering code from your keypad.
They unlock from network who locked your blackberry
This site will help you a lot & good email & 24/7 phone support

http://blackberryimeiunlockcodes.com

Sep 28, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

BB 8320


Do you have a SIM card installed on this phone? If not, try inserting one properly and correctly.

Secondly, how good is your battery? Try charging your battery fully. Also, it should be a good battery with some life left in it.

Finally, if you have a valid and authenticated SIM card installed, and your battery is good and fully charged, the next thing to do is remove the battery, wait for about 60-90 seconds, reinsert battery and unit should boot up fine after about 2-5 minutes. Hope this helps.

Aug 20, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

I need PUK code for Blackberry Curve


You can get the puk code by calling your phone service provider, the phone doesn't have a puk code, if you change the sim card it wont ask for the puk.

Apr 12, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

3 Answers

The battery on my blackberry 8310 went dead. I


ok so what u basically do is just keep the charger in the usb port. then take the battery out then plug it back in. this totally works!

Apr 01, 2009 | RIM Blackberry 8310 8320 8330 Curve 8100...

1 Answer

How to copy contacts from memory card to my blackberry 8310 phone


If it is your sim card you are speaking about all you need to do is press the BlackBerry button and choose SIM Address book and it will display them from there you can move them to your Phone Memory.

Jan 18, 2009 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

At&T 8310 Blackberry. Delete all contact at one time, and from the sim card?


This is done in desktop manager. You have to hook your BB up to your Desktop and then go through the backup and restore process. If you need help we can show you.

Sep 11, 2008 | AT&T BlackBerry Curve 8310 Cell Phone -...

1 Answer

Invalid SIM card


Go to your provider and ask for a new sims card. They should give you one free of charge. This corrected the same problem for me.

Jul 09, 2008 | AT&T BlackBerry Curve 8310 Cell Phone -...

5 Answers

Unlock bb curve 8310, can you help?


It's a clear and fully detailed guide on how to unlock a BlackBerry 8310 ' Curve :

1. Insert any sim card
2. Turn off all of the wireless connections
3. Go to Options
4. Select Advanced Options
5. Select SIM Card
6. Hit menu select show keyboard (if your BlackBerry have touchscreen)
7. Type MEPD ( you will not be able to see what you are typing )
8. Type MEP2 or MEP4 ( you will not be able to see what you are typing )
9. Now the phone will prompt you to enter the mep code
10. if you not already have the code, then i suggest BlackBerryMEP.COM to get it from .
11. Enter the mep code ( you should see "code accepted" )
12. Restart your BlackBerry .

All done.

SOURCE :
BLACKBERRYMEP.COM

Jun 14, 2008 | AT&T Blackberry Curve 8300 Smartphone

Not finding what you are looking for?
AT&T BlackBerry Curve 8310 Cell Phone - Red Logo

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top AT&T Cell Phones Experts

William Alequin

Level 3 Expert

856 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18357 Answers

Trisha
Trisha

Level 2 Expert

173 Answers

Are you an AT&T Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...