Question about Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC)

1 Answer

Will show avaliable wireless networks but won't connect

My wireless dongle will show whatever networks are in range, but when I try and connect to it, I'll get an error message that says ' Windows cannot connect to [network], Windows will keep trying...', but only a couple days ago it was working just fine.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

TCP/IP stack repair options for use with Windows XP with SP2 & Vista.

For XP, Start, Run, CMD to open a command prompt.

For Vista, Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reboot the machine.

if the Issue presist then you need to try System restore
If Windows XP starts loadTOCNode(3, 'moreinformation'); 1. Log on to Windows as Administrator. 2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts. 3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next. 4. On the Select a Restore Point page(try the date 2 dats prior it was working or the First Bolded Date of that month), click the most recent system checkpoint in the On this list, click a restore point list, and then click Next. A System Restore message may appear that lists configuration changes that System Restore will make. Click OK. 5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer. 6. Log on to the computer as Administrator. The System Restore Restoration Complete page appears. 7. Click OK.

Posted on Aug 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg dongle won't connect need help I have all lg electrical equipt


some dongles are made by only to connect to the desktop or the laptops only. better thing is ask the service provider who sold that dongle.

Sep 02, 2012 | LG ANWF100 Wireless dongle

1 Answer

My filemate wireless adaptor keeps disconnecting from the router


Try these:

  • Open Device Manager, open the Network Adapters, double-click the wireless adapter to open its Properties, click the Power Management tab, and deselect "Allow the computer to turn off this device to save power".

  • Some internal wireless adapters will have conflicts with your sound card, using the same interrupt. If either of the devices will let you change the interrupt under Properties, Resources, that would be a good think to test. USB wireless dongles are cheap, and there are no interrupt problems.

Dec 11, 2011 | Wintec Industries FILEMATE 300M 80211N PCI...

1 Answer

I have the RNX-N1MAC wireless adapter and just recently it has started dropping internet connection. It stay connected to the wireless and shows full bars, but pages won't load.


1. check the manufacturers web site to see if there is an updated firmware for your adapter.
2. check your wireless router to see if you have to update the firmware ( this is is you are using this adapter on your home network

Jun 17, 2011 | Rosewill Wireless Adapter RNX-N1MAC IEEE...

1 Answer

I purchased the lg an-wf100 dongle. It connects to my wifi but is asking for a manual ip entry. I have a 42lg5500 led tv. The manual/automatic field is frayed out, so is the DNS field.


Sounds like your router isn't set for DHCP. Try entering an IP address that isn't in use on your network. You'll find the IP address range in your routers settings. Either that, or set your router to DHCP. Hope this helps.

Regards,

Matt

Mar 16, 2011 | LG ANWF100 Wireless dongle

1 Answer

I have a broadcom network card in my new netbook it will connect to my wireless but goes off straight away, it does connect to my tmobile dongle, please can you help. rae_eileen@yahoo.co.uk


You may have your wireless settings set to connect to your TMobile dongle by default, try going into your wireless settings and changing the default over to your preferred network.

Feb 28, 2011 | Broadcom Computers & Internet

1 Answer

Hi,how do i connect my orange wireless dongle to my ps3,i do have windows7.


Hello,

The wireless dongle does not work as a wireless network card or router.
What this dongle does is simply connects wirelessly to the Orange broadband network so your computer can go online.

The PS3 will need to either connect to router or a network card on your computer.

Once your PS3 is connected to the computer, you can then share the network connection through Windows 7.

Thanks,

Pat

Mar 14, 2010 | Computers & Internet

1 Answer

I have a Netgear WPN 111 dongle on a stand alone PC. It worked with my Netgear G router. I have now changed to a Netgear Router N300. My Laptop connects as does Iphone and Ipods but the Netgear dongle...


As u have upgraded ur router setup ..
And u have tried all possible troubleshooting steps..
Please upgrade the adapter drivers using
http://kb.netgear.com/app/answers/detail/a_id/12520

And after upagrading the drivers ,
Uninstall the adapter and reinstall it ..
I hope it will be connected ..

Jan 07, 2010 | NetGear WPN111 RangeMax Wireless USB 2.0...

1 Answer

Prob connect to network that are avali befor it was fine.


Sometimes this really happen to correct this one better uninstall and reinstall the adapter software from your computer and then after that connect to the network and if still not working better download the latest driver for this adapter from Linksys site.....

Nov 09, 2009 | Linksys WUSB54GC 802.11g/b Wireless...

1 Answer

Aspire 3000 laptop


Normally you setup a passkey or use 0000 or 9999 as a passkey.

The question is, does that pop up when you try to connect a USB device? Do you get that when you try to install the dongle? (That shouldn't happen). If you are trying to connect a PDA or cell phone, you setup the passkey for the connecting device on the computer then type it in to the PDA or mobile phone. If you are trying to connect a bluetooth headset, then you use whatever code is from the manufactorer. Normally this is 0000 or 9999.

Hope this helps!

Oct 18, 2008 | Adapters.com Bluetooth USB Adapater, USB...

Not finding what you are looking for?
Linksys WUSB54GSC Compact Wireless-G USB Network Adapter w/ SpeedBooster [WUSB54GSC] (LS-SB54GSC) Logo

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...