Question about Computer Monitors

Open Question

Trying to connect a LG Flatron w1942T monitor up to a cable box

I have this monitor connected to the cable box via DVI cable but it keeps telling me that the digital out of range and says 33.6 kHz / 30Hz???

Posted by on

  • glassdownsou Mar 20, 2009

    I have this monitor connected to the cable box via DVI cable but it
    keeps telling me that the digital out of range and says 33.6 kHz /
    30Hz???

×

3 Suggested Answers

SOURCE: Analog Out Of range (LG Flatron L1750T)

Install the monitor drivers on the CD that came with it. Most people plug in the monitor and think they don't need the Drivers on the CD. Every thing works fine untill one day you get the problem you guys are having. Make sur you install them manually otherwise windows will still you use the old drivers even though you use the CD

Posted on Feb 20, 2008

freetek
  • 5568 Answers

SOURCE: monitor problems

Try setting your resolution lower via the control panel; it appears the resolution picked by Windows is beyond the monitor's capabilities. 

Posted on Dec 15, 2008

budmrtn
  • 11361 Answers

SOURCE: How to a solve "

You need to set your PC video resolution to the native resolution of this monitor.
Please read here: http://www.fixya.com/support/r4873371-fixing_out_range_format_not_supported

Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

Posted on Sep 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My LG FLatron W1942T Monitor shows the picture half light half dark. CAN ANYONE HELP ME TO SOLVE THE PROBLEM?


Hello

There seems to be a problem with the inverter PCB responsible in glowing the required lamp. Hence try to check if any physical damage to the lamp if not then you may have to go for power supply

Jul 15, 2011 | LG 22" FLATRON LCD Monitor

1 Answer

Can you use an xbox arcade on flatron LG L1810T? If so which setting does it have to be on as the tv is not recognising the xbox at all


HI,
Your LG LCD monitor has a white DVI connector for connecting the signal cable.

You would reqire either an HDMI to DVI(male connector cable for the xbox) so that you can hook the hdmi cable to the xbox and other end to your monitor.
The cable would look something like this
http://hardware.teamxbox.com/reviews/xbox-360/40/Xbox-360-VGA-HD-AV-Cable/p1/

Thanks
proton

Jun 06, 2010 | LG Flatron L1810T 18.1" LCD Monitor

1 Answer

Our LG screen will not work says for a brief moment its in Power saveing mode then noting to make it work.. I haev it oin our other computer & same result....


There's a set of buttons on the front where you can choose input source. Your monitor has probably been set inadvertently to receive a DVI signal while it's connected via a VGA cable, or vice versa. Other than that, check your connections. Remove the cables from their sockets at both ends, and ensure you connect them back snuggly and turn the screws hand tight only.
Good luck!

Sep 07, 2009 | LG Flatron L1951S-SN 19" LCD Flat Panel...

1 Answer

Connection hook up problem


Set the resolution lower.

It is telling you that the resolution you want is beyond its normal operating range.

just drop it to lets say 800 x 600
Then bump it up one resolution at a time until you get the message again, then drop it back one.

Running monitors above the acceptable range can drastically shorten their lifespan.
With lcd monitors you are much better using the DVI cable if yout video card supports it.

Sep 07, 2009 | Computer Monitors

1 Answer

Screen stays in analog mode


analog usually means its hooked up via VGA cable
digital means its hooked up via DVI cable

Sep 04, 2009 | LG Flatron L1750S 17" LCD Monitor

1 Answer

New LG 2452T keeps going to digital power saving mode


i had the same problem.
connect the monitor with the analog cable and shut down your pc.
while it is off unplag the analog cable and place the digital one(dvi).
this should fix your problem m8 ;)

Feb 28, 2009 | LG Flatron L2320A 23" LCD Monitor

2 Answers

Analog power save mode


Are you connect via Analog (Blue VGA connection) or DVI (White Digital connection?

If you are connected via DVI, then you have to change the input select button to DVI

If you are Connected VGA, make sure the system doesn't have 2 VGA ports. If it does, connect to the other port.

May 02, 2008 | LG Flatron L1951S-SN 19" LCD Flat Panel...

1 Answer

DVI connection


Did you try your monitor with another output (VGA)? If not, try it.
So, you have to check and make sure where the problem is (display card, monitor, or cable). Try with another cable or monitor. This way you will know where the problem is. If you don't have another monitor, try the monitor you have with build in VGA output on motherboard by taking the display card out.
Thank you,
Tan

Mar 04, 2008 | LG Flatron 295LM 22" LCD Monitor

1 Answer

Display input


You have to make sure the dvi connection is turned on.

Jan 03, 2008 | LG Flatron L1810B 18.1" LCD Monitor

Not finding what you are looking for?
Computer Monitors Logo

Related Topics:

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

William Miller
William Miller

Level 3 Expert

8858 Answers

Are you a Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...