Question about Printers & Copiers

2 Answers

Cannot use printer I attach USB cable to my iBOOK G4 table put in your disk Cannon i80 setup software & user's guide follow instructions and I get no reaction I use to be able to print e-mails but am doing something wrong do not know what? I own Printer for over 3 years and am registered with Cannon Pls HEIP

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 521 Answers

There may be problem with usb driver in your pc to rectify
1)right click the my computer icon
2)click properties and then click hardware n go to device manager.
3)uninstall all usb ports and then scan for hardware changes
4)ur pc will detect your printer and ask for printer drivers
5)re load drivers and your pc will communicate with your printer
6)for reloding install the cd follow the instructions on the screen and click next
7)restart when the printer is loded.connect the wires and cords properly.

Posted on Aug 09, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Does you operating system recognize the printer when you plug it through USB cord? let me know for further guide lines.

Posted on Aug 09, 2008

  • Shahid Electronics
    Shahid Electronics Aug 15, 2008

    Hi,

    any further help you need in seting up printer?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I add a 3420 desk jet printer to my computer


If your HP Deskjet 3420 Color Inkjet Printer comes with the installation Disk, put the disk into the CD/DVDRom and follow the installation wizard instructions for the installation. You have to attach the USB cable from your printer to your PC USB port. Run the installation disk & power on your printer and your PC will detect & install the drivers & software for your system.

If you do not have the Drivers & Software, download them from :-http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=75040

Be sure to select the correct OS for your download.

Hope it helps.

Aug 03, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

I want to install the printer on my laptop


Hi, Please follow the instructions to install it If you have a disk for your printer then put the disk in It would automatically pop up a window to install the printer (If doesn't, go to My Computer>CD/DVD drive and at the bottom most of the window, you would find an Hp Icon with the name Setup Click on setup and it would show you the installation window, Follow the instructions after you click on install, it would show you a window saying please allow all hp processes... click next on that window After that it would show you the window to Agree the terms and conditions, so please select 'I Accept and click on Next' If in between any window showsjust keep clicking Next, Until you don't get to the point which says connect the USB cable Once you would connect the Usb cable it would show up a green bar, Once it completes please click on next And then a Windows would come up saying 'Congratutalations!! Your printer has been installed completely' Click on Finish and your printer is setup If you don't have the software CD, click on the link below to download the software
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3645100&lc=en&cc=us&dlc=en&submit.y=0&submit.x=0&lang=en&cc=us

Select the operating system that you are using and click on next It would show you the drivers below Click on the (+) sign next to drivers and download the Full feature softwares and drivers Once you click on download, a window would pop up asking Run or save Click on save and the window the pops up Select Desktop on that and click on save Then once its downloaded, click on the icon that shows on the desktop for downloaded software and extract it Once its extracted, It would show up the installation screen. Then you can follow the instruction written above

Oct 26, 2010 | HP OfficeJet J4580 All-In-One Laser...

1 Answer

I had to have windows reinstalled in my computer and know I am attaching my HP Deskjet printer and need assistance


Hi, Please follow the instructions to install it If you have a disk for your printer then put the disk in It would automatically pop up a window to install the printer (If doesn't, go to My Computer>CD/DVD drive and at the bottom most of the window, you would find an Hp Icon with the name Setup Click on setup and it would show you the installation window, Follow the instructions after you click on install, it would show you a window saying please allow all hp processes... click next on that window After that it would show you the window to Agree the terms and conditions, so please select 'I Accept and click on Next' If in between any window showsjust keep clicking Next, Until you don't get to the point which says connect the USB cable Once you would connect the Usb cable it would show up a green bar, Once it completes please click on next And then a Windows would come up saying 'Congratutalations!! Your printer has been installed completely' Click on Finish and your printer is setup If you don't have the software CD, click on the link below to download the software http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=372335&lc=en&cc=us&dlc=en&lang=en&cc=us Select the operating system that you are using and click on next It would show you the drivers below Click on the (+) sign next to drivers and download the Full feature softwares and drivers Once you click on download, a window would pop up asking Run or save Click on save and the window the pops up Select Desktop on that and click on save Then once its downloaded, click on the icon that shows on the desktop for downloaded software and extract it Once its extracted, It would show up the installation screen. Then you can follow the instruction written above

Oct 25, 2010 | HP DeskJet 3745 Printer

2 Answers

I need to know how to hook up the lexmark x5150 printer to my computer i have no manual.


With the computer running, plug in the printer connection wire into a USB port. Then turn on the printer. If you're lucky, the computer will tell you it just found new hardware and after a few minutes...2 or 3...will say it's ready to use. If not, it will tell you to install the CD that came with your printer. Then follow the screen prompts. The minimum required is a "driver". Much of the other software on the CD is for photo manipulation or other functions that you may or may not want to do so yo might ignore adding the extra software. Just read the screen for details to decide if you want to install it. Or if you have room on your drive, just install everything and not have to install anything in the future if your needs change.

Sep 07, 2009 | Lexmark X5150 All-In-One InkJet Printer

1 Answer

Dont know if I have the right cords specifically what is the connection process.


If you go to the Canon support site here you can downlod easy setup instructions. This page has some other manuals and user guides that may also be of use.
Here are the basic usb cable instructions:
Connect the USB Cable Correctly (i70 / i80 / iP90) Instructions to connect the USB Cable Correctly to the printer (i70 / i80 / iP90). Before connecting the cable
After confirming the printer and computer are turned off, connect them using the USB cable (sold separately).

Note: Below is an example of what a standard 'A to B' USB Cable looks like.



usb_cable.jpg


How to connect the USB cable
  • Plug the flat connector of the cable into the USB port of the computer.

    Note: If there are two or more USB ports in the computer, any available port may be used.

  • Plug the squarish connector of the cable into the USB cable receptacle of the printer.

    ip90_usb_port.jpg

<1> Computer's USB Port
<2> Printer's USB Cable Receptacle



I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Aug 20, 2009 | Canon PIXMA iP90 InkJet Printer

1 Answer

Apple ibook g4 with no restore disks


http://guides.macrumors.com/Installing_Mac_OS_X_10.4_without_DVD

Jul 30, 2009 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

I got a Lexmark x1185 from my sister, but no printer cable or installation software CD. What kind of printer cable and ethernet cable can I get to get it up and running and where can I download the...


The printer uses a USB cable to connect to your computer.

You can download the software from Lexmark Support

Enter your model number in the Search by Model box and click on the model when it appears.

On the next page click on "Download Driver" in the upper right.

Next page select your operating system.

Next page select "Download Now". When the download window opens select Save and save it to a folder where you can locate it after the download. You can also save it to your desktop, if you like.

When the download is done close the window. Connect the power cable to the printer and make sure it is turned ON. DO NOT CONNECT the USB cable yet. Find the file you downloaded and run (double-click) it. When you are prompted by the software, connect the USB cable and continue to follow the directions.

You may also want a setup and user guide. Here are pdf links:

Lexmark x1100 Setup Guide

Lexmark x1100 Series User Guide



Dec 31, 2008 | Printers & Copiers

1 Answer

HP Laser Jet 4 Plus to iBook G4 serial to usb


serial to usb is not plug and play so i don't believe this configuration will ever work.
parrallel to usb is plug and play 90% of the time.
purchasing and installing a port replicator is a 100% fix as long as the formatter on the printer is working properly. good luck!

Aug 21, 2008 | HP LaserJet 4 plus Printer

2 Answers

HP PSC All-in-one Inkjet printer setup guide


Hello,

Assuming you have allready used the printer sometime before but have a pc without the software, you should do the following:

Leave the USB cable unconnected, it should be connected when the software asks you to.

- Open the paper tray and insert white paper.
- Connect the power supply to the printer, the power cable to the power supply and into the wall socket.
- Switch the printer on and look at the display. if messages appear such as select the language, please do so with the arrow keys and the OK button.
- Open the printer by moving the upper half up (not the scanner cover) and insert the cartridges in the slots (marked by color and figures). The printer should print an alignment page if new ink cartridges have been placed.
- Install the software from the CD on your computer. If you don't have the CD, you could download it from the hp website.
- When the software asks you to connect the printer, do so by plugging in the square USB plug into the printer and the flat USB plug into your pc's USB port.
- The software should see that the printer has been connected. Please follow the instructions on the screen to finish the installation.

If the software is already on your computer, you only need to connect the power supply and the USB cable and the printer should work.

Good Luck,
Danny.

Dec 18, 2007 | HP PSC 1610 All-In-One InkJet Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

old marine
old marine

Level 3 Expert

1476 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...