Question about D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point

3 Answers

Configuration I have one of these, but i can't find a way to configure it. The manual tells me to enter 192.168.0.50 in my browser, but it doesn't load. Please help!

Posted by on

  • Anonymous Sep 29, 2008

    how do i know th ip off the acces point to lod in it

  • Anonymous Nov 30, 2008

    abrir puertos de emule

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Iam use d-lik dwl-2100ap i can't reset the configration like ip when i press reset botton no any thing change

Posted on Oct 16, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

One of the problems with setting up any of these access points or routers is to understand the concept for connection.
First of all, your will need to go into the properties of the local network connection and open the TCIP protocal and change the ip configuration from the auto to a set ip address. Use 192.168.0.5 or anything between 1-256 except 50. then set your submask to 255.255.255.0 which will automatically load when you access that field. Then click OK to complete this setup. If you are lost in what I am saying by now, you may not be able to understand what is happening and need to get someone who understands this help you.
Once you have setup your local network adapter then you can plug it into you Dlink AP and open up you browser. Put the IP 192.168.0.50 into your URL file and hit enter and you should get the First screen for the setup of the unit, it will ask for a username - put in admin, leave the password blank and hit Okay to continue and then do your setup per your manual and the confiuration you desire.
Hope this will help and it does work.
Andre' Peery

Posted on Aug 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 171 Answers

The best way to set this access point is to connect your computer directly to the device via Ethernet, disble the wireless adapter temporarily on the computer. Since this is just an access point and not a wireless router, it is not capable of providing your computer with an IP address because it has no DHCP functionality.

The IP address you mentioned is the deafault IP address of the access point, there is a posibility that the default IP has been change.

Do a reset on the access point then assign an IP address manually on your computer(i.e 192.168.1.x x- bein any number from 1 to 254 except 50)

Access the AP using Internet Explorer or Firefox, type http://192.168.1.50 on the address bar it should prompt you for a username and password(check you documentation for the default username and password for the access point)

Posted on Aug 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got my password


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Nov 19, 2012 | Belkin Wireless-G Plus MIMO Router with...

1 Answer

Can't access 192.168.0.227


This configuration IP address is wrong for the Netgear.
To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Mar 25, 2012 | NetGear WG602 802.11g/b Wireless Access...

1 Answer

How to manually instal my netgear router with out a disk


To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Dec 25, 2011 | NetGear Computers & Internet

1 Answer

The router was reset. So, our AP does not work with it anymore. I reset the AP to restore it to its factory default settings and tried to follow the steps I made before in configuring the AP. but i can't...


Before you configure this device, note that when the AP is configured through an Ethernet connection, (via RJ45 Network Cable) make sure the manager PC must be set on same the IP network. For example, when the default network address of the default IP address of the AP is 192.168.1.1, then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254), and the default subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter IP address http://192.168.1.1 (the factory-default IP address setting) to the address location. Please refer here to the Latest User Manual for Encore ENRWI-G Page 9 onwards describes the login details.

Hope this Helps!
CreativeTECH

Jan 01, 2011 | Computers & Internet

1 Answer

Reset cisco airnet 1130ag


There are 2 ways to reset the access point.

Using the MODE Button

Follow these steps to delete the current configuration and return all access point settings to the factory defaults by using the MODE button:

1. blank.gifOpen the access point cover

2. blank.gifDisconnect power from the access point (the power jack for external power or the Ethernet cable for in-line power).

3. blank.gifPress and hold the MODE button while you reconnect power to the access point.

4. blank.gifContinue pressing the MODE button until the Ethernet LED turns amber. (approximately 2 to 3 seconds). Then release the button.

5. blank.gifAfter the access point reboots, you must reconfigure it using the web browser interface, the Telnet interface, or the access point console port.
Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access point settings to factory defaults using the web browser interface:

1. blank.gifOpen your Internet browser. You must use Microsoft Explorer (version 5.x or later) or Netscape Navigator (version 4.x or later).

2. blank.gifEnter the access point IP address in the browser address line, and press Enter. An Enter Network Password screen appears.

3. blank.gifEnter the username Cisco in the User Name field.

4. blank.gifEnter the password Cisco in the Password field and press Enter. The Summary Status page appears.

5. blank.gifClick System Software. The System Software screen appears.

6. blank.gifClick System Configuration. The System Configuration screen appears.

7. blank.gifClick the Reset to Defaults button.

Note blank.gifIf the access point is configured with a static IP address, the IP address does not change.

8. blank.gifAfter the access point reboots, you must reconfigure it.

Aug 13, 2010 | Cisco Aironet 1131AG 802.11a, 802.11g/b...

1 Answer

Configuration page doesn't load


1. can you ping the router? go star>run>cmd and type ping 192.168.0.50
if the ping times out or says it's unreachable, check your network connections (cables are fully seated and there leds are blinking properly)
2. try to type 192.168.0.50 on the address bar and hit enter, did you change the ip address on the router before?? if you did and can't remember what ip address you gave to it you may need to reset your router.
3. try the same ip address in another browser (IE, chrome, firefox), Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure the Java applet is loaded.
4. are you using the right the correct user name and password? enter 'admin' (lower case) and hit enter or the password you may have configured, if you can't remember what that was reset your router.

you router's manual can be downloaded from here

good luck

Nov 22, 2009 | D-Link DWL-G700AP 802.11g/b Wireless...

1 Answer

I have airtel brodband connection but today i bought a wireless-g (linksys) how i setup it


get the default ip address of the router which is either 192.168.0.1 or 192.168.1.1

Should be stated on the underside of the router or in the manual of the router.

Open your web browser ( internet explorer or firefox )

Delete everything out of the address bar and then enter the ip address of the router into the address bar including the dots ie 192.168.1.1 and then press enter

It should prompt you to login

the default login is admin as the username and click on ok ignoring the password field.

Otherwise it will be admin as the password and ignoring the username field and click on ok

This should take you to the web based configuration interface where you can configure all the settings for the router with regards to wireless , the ISP settings etc.

If you are unsure of what to configure in there post back with what your ISP advises to configure and I can help further.

Apr 15, 2009 | Linksys Wireless-G WAP54G 802.11g/b...

2 Answers

Need help


Try typing 192.168.1.1 into your browser. That is usually the default address used by most routers and such. If that does not work then find an open source network scanner like Nmap and run it to determine the IP and then type it into your web browser. Word of caution these tools are for experts.

Nov 26, 2007 | OTC ACR201-G (00CSPP000122) 802.11b/g...

1 Answer

Web Configuration


Are you using IE? Are you entering this address in the address bar? Try http://192.168.2.1

May 23, 2007 | Zyxel ZyAIR B-1000 802.11b

1 Answer

Problems With Web configuration


Try this - 1) Check the IP Address first 2) Assuming that you have Windows XP. you may click on start -> run and type 'CMD'; Click 'OK' 3) This must bring up a black screen, which is the command prompt 4) Next to the cursor, type 'IPCONFIG' and hit enter 5) This will give you some information and one of them would be the Default Gateway, which would be the IP Address of the Zyxel router (if the computer is actually getting a connection from the router) and this IP Address is the one which can be used in the Internet Browser to open the web configuration 6) In the previous steps I'm assuming that the IP Address of router is not 192.168.1.2 7) In case, we have an IP Address of 192.168.1.2 and you are still not able to pull up the web configuration, check for any software firewall. Disable it temporarily. THE STEPS GIVEN ABOVE ARE GENERALISED AND MAY NOT WORK FOR EVERY SITUATION. IF YOU ARE NOT ABLE TO FOLLOW THE STEPS GIVEN ABOVE, PLEASE INITIATE A CHAT SESSION WITH ME FROM THE FIXYA HOMEPAGE WHENEVER I'M ONLINE AND WE'LL CARRY ON FROM THERE. GOOD LUCK

May 20, 2007 | Zyxel ZyAIR B-1000 802.11b

Not finding what you are looking for?
D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18334 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...