I have a RCA Universal remote model RCR4258N and a Phillips DVD player model 5960/37. How caan I get them to work together, where do I find a code list?

Here it is right from the RCA site: Toshiba 10060 Thanks for using fixYa:)
Farmerbear

http://www.rcaaccessories.com/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR4258N

http://www.hifi-remote.com/
Try this website.

Radio Shack should be under $25 and there Remotes are usually made by RCA a division of Phillips, RCA is the Mfg of Most Polaroid/Kodak Audio/Visual equipment. Unless it has a lot of features, I'm sure it only uses a 3 digit remote code, If you need  a 4 digit remote code Remote it might cost you more than that. make sure you take the model # with you to Radio Shack & they will be able to tell you if you need a 3 or a 4 digit remote code remote. : )     Jay..........

I need the codes for a sharp tv for a MAGNAVOX MRU1300/17 3-DEVICE universal remote

I have a Phillips 5-in-1 Universal Remote (model MRU3500), and I have my code list booklet. There is only one (1) code given for a Nec brand Dvd player: 0142. Hope this helps you.

I have an old KTV, model 13tec and need a new remote.  Which RCA should I purchase RCR 312W or RCR 451??  What code do I use??

I don't know if this will work for you since your Philips universal remote is a different model. I tried all the codes listed for a Philips DVD player in my Philips SRU3004/27 universal remote manual. Two of them partially worked (wouldn't let me scan forwards and backwards). The last one they listed did work, code 1214. I suggest trying all the codes in the handout that comes with the remote for Philips DVD players. Make sure each number you press registers (the indicator light on the remote will blink). Philps also lists these codes on their web site. Good luck!

You didn't wrote the manufacturer of your remote.

If it is RCA you can get code or auto search instructions from this page http://www.thompsontv.com/rcarc.html

If it is Phillips than go to http://www.urc.philips.com/

If you remote isn't RCA nor Phillips than I'm sorry for not being able to help you. :)

I finally found a code that works. Code 3144 worked. I am using the RCA universal remote control RCR412S and RCA DVD player DRC200N. The code 3144 is listed under Memorex in the code book that came with the remote control.