Question about 3Com OfficeConnect Wireless Router

1 Answer

Put a password on my 3Com router

I need to set a password because they steal all my connection so I put the default gateway and it brings me to the site of my modem not my 3com router, if you want more info my version is 3CRWE454G72

Posted by on

  • Anonymous Aug 23, 2008

    i want to put a password to access the wireless coz the neighbours are downloading things i think and i m getting low speed

  • Anonymous Oct 03, 2008

    How to stop someone hacking into my computer



×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 154 Answers

Hi, start internet explorer (blue e) in the address bar type 192.168.1.1 and press enter
in the new screen, type in the password to enter the set jup (as it says, admin is the default)
click wireless settings on the left hand side of the screen, click encryption, select wpa-psk from the drop down boxwhere it says pre-shared key, type in a MEMORABLE password and then click apply. Now you will lose your wireless signal. Panic ye not! Click on the smatt TV in the lower right hand side of the screen (this is called the sys-tray) you will now see that the wireless icon which looks a bit like a telly eith 3 yellow arcs coming out of it's right hand side has a red cross on it. Click it once, click view wireless networks and then on the new screen click refresh network list. You will after a few seconds see your network -click on it and then on connect. A new box will come up asking you for the networe key aka password. Enter the memorable password you have just forgotten in the upper and lower boxes and press enter. Et voila! you now have an encrypted wireless network and you can only get onto it if you know the memorable password! Have fun

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to reset it


You need to configure your router with below method. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. Then set WAN settings as internet service provider settings enable DHCP. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 10, 2011 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

Which ip do I use to connect for first time?


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Feb 05, 2011 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

We have a 3COM officeconnect, at home. And i want to connect with the wifi of it, but i have to type in the password on my iPod. I have no idea what the password might be, i hope you can help me...


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. If you are still not able to access router with above ip then you need to RESET it for that press RESET button for 10 seconds it is in back side of router then all settings defaults..Then you can access it with above method. . Then click on wireless->wireless security->WEP security there is code password note down it or enter new password then save setting s and restart router. then you can connect wireless with new password. Let me know if you need further assistance. Thanks for using FixYa.

Nov 27, 2010 | 3Com OfficeConnect Wireless Router

2 Answers

I bought this at a store called goodwill and i need password for it


Good luck with that, it is easier and much faster to go to 3Com and download a manual, then reset the unit and put in your own settings. Change access password, give a meaningful system ID, turn on wireless security, and set a password for the wireless.

Oct 09, 2010 | 3Com OfficeConnect Wireless 11g Cable/DSL...

1 Answer

How do i set up password to secure my internet connection with a 3 com router


Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless->wireless security enable WEP then enter password then save settings and restart router. It is your password to connect wifi. . Let me know if you need further assistance. Thanks for using FixYa.

Sep 21, 2010 | 3Com OfficeConnect Wireless Router

2 Answers

I need to reset my password neighbours are stealing my internet


Hey, the linksys routers usually have a default IP of 192.168.1.1, so in your browser type that address and it will bring you to you to a login screen for your router. If you have never set or changed the account for this login the default is admin with no password.
If that address doesn't work you can find out the IP with these steps:
For Windows XP
  • Start > Accessories > System Tools > CMD
  • type ipconfig > look for default gateway and that will be the address to your router where you can change your password
For Vista/7
  • Start and search CMD and press enter
  • type ipconfig > look for default gateway and that will be the address to your router where you can change your password
Also I would suggest setting a login name and password to future secure your network, any questions let me know i'm here to help.
Cheers,

Mar 14, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

3Com OfficeConnect Wireless 11G password


Press reset button on the rear of the unit for 5 secconds, then by connecting your moden in to yor laptop go to the following web page: http://www.3com.com/products/en_US/detail.jsp?tab=support&sku=3CRWE454G72&pathtype=purchase and there you will find the software and manual for your AP (access point) the software will let you setup the device from scratch. the default password is admin. hope this helps.

May 23, 2009 | 3Com OfficeConnect Wireless 11g Cable/DSL...

3 Answers

How to set up a password for 3com router?


Hello celinegroot,
I made a video for you explaining in simply method
There is the Video on YouTube
Thank you for using FixYa.

Apr 11, 2009 | 3Com OfficeConnect Wireless Router

1 Answer

Router problems


Hi!

The default password is admin.
Please see this link for the default settings and password for your 3com router---

Default Password

Please rate this solution

Thanks
Rylee

Feb 14, 2009 | 3Com OfficeConnect Wireless Router

2 Answers

Password in 3com router


What model router is it? here are some general directions: go to internet explorer, type in 192.168.1.1 and hit enter... this should bring up a login box... generally the username = admin or administrator and the password = password... (if that doesnt work look on the bottom of the router or in the manual for info) once your logged into the router proceed to the Wireless or security menu - you want to enter a WEP or WPA passcode of your choice (WRITE DOWN THIS PASSWORD) you will have to enter this password on any computer you want to connect via wifi Make sure to save your settings

Feb 05, 2009 | 3Com OfficeConnect Wireless Router

Not finding what you are looking for?
3Com OfficeConnect Wireless Router Logo

779 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Routers Experts

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Coss

Level 3 Expert

1039 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a 3Com Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...