Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer control locked

I tried the pause/cancel button, holding the control button down and turning off the circuit trying to get washer to reset. How do I restart. By the way, I just got home from camping with motor bikes and really need to get the smoke and gasoline smell out of the clothes. Thanks

Posted by on

  • rkdrury Aug 21, 2008

    my control locked button in on. Tried unplugging re plugging pause cancel nothing works

  • Anonymous Feb 18, 2009

    yes, very helpful

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Hold down the End of Cycle Signal for 3 seconds that will release the control lock function

Posted on Aug 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Controls locked


The Control Lock prevents unintended use of the washer. You can also use the control lock feature to prevent unintended cycle or option changes during a cycle. When CONTROL LOCKED is lit, all buttons are disabled except for Pause/Cancel and Start. You can lock the controls while the washer is operating. To lock the controls: Select and hold DRAIN & SPIN for 3 seconds. The CONTROL LOCKED status light glows. To unlock the controls: Select and hold DRAIN & SPIN for 3 seconds or until the CONTROL LOCKED Status light turns off.

Aug 06, 2012 | Whirlpool AWM9000 Front Load Washer

2 Answers

My washing machine says control locked


Hello there
Try putting the machine into diagnostic mode. If it won't enter diagnostic mode, then you need to replace the main control board.

DIAGNOSTIC TEST

The washer must be empty and the control must be in the OFF

state before pressing the touch-pad sequence to start the test.

Starting the Test Mode

? Close the door.

? Push CONTROL/ON (if present on this model).

? Select the DRAIN/SPIN cycle.

? Select NO SPIN by pressing the SPIN SPEED touch-pad.

? Push PREWASH OPTION four times within five seconds. (If

PREWASH OPTION is not present on this model, press EXTRA

RINSE four times within five seconds.) C:00 will light up on the

display.

If the Starting procedure fails, push the PAUSE/CANCEL touch-pad,

then repeat the starting procedure.

Test Program Control

In order to advance to the next step of the test procedure, push

PREWASH OPTION touch-pad two times. If PREWASH OPTION is not

present on this model, press EXTRA RINSE two times.

Read more: Whirlpool Duet Washer 'Control Locked' - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help - ApplianceGuru.com: The Samurai Appliance Repair Forums http://applianceguru.com/forum2/1540.html#ixzz1AbBWB73c
Get appliance parts at http://parts.fixitnow.com

Jan 10, 2011 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The control lock is on. I have tried unplugging it and pushing the cancel pause button and it is still on and I can't do anything because because it is all locked.


Hello
To unlock the controls you can reset the control by pressing the END OF CYCLE button and hold it for 15seconds. This is a common issue with whirlpool duet washers. Please get back to me if you have any other questions.
Kevin

Nov 09, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How do you get control lock off whirlpool duet washing machine


To unlock the Control Locked feature:

Press and hold the End Of Cycle Signal button for 3 seconds to turn this feature off.

NOTE: When the machine is running and Control Locked light is on, the machine can be stopped by pressing the Pause/Cancel button, but cannot be restarted until the control is unlocked.

Oct 02, 2009 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Help! I have a whirlpool frt load dryer it is locked (controls)


You need to press and hold the "End of Cycle Signal" button on this model to lock or unlock the control panel. The instructions should be printed directly below the button.

Jun 30, 2009 | Whirlpool GEW9250 Electric Dryer

1 Answer

Control lock light will not go off.


Do you have any error codes?

Does water remain in the washer after the final spin?
If water remains in the washer after the final spin, then the door will not unlock. Drain/Spin or Spin Only to remove any remaining water from the washer. The door should unlock at the end of the cycle.
Is the door locked and the Add A Garment light on?
If the Add A Garment light is on, then the washer door will unlock after the Pause/Cancel button is pressed once. Pressing the Start button will restart the washer at the same point where it left off in the cycle.
Is the door locked and the Add A Garment light off?
If the Add A Garment light is off, then the washer door will unlock after the Pause/Cancel button is pressed twice. The door will not immediately unlock while the cycle is running due to a possible high-water level in the washer, high-water temperature, tumbling or spinning. It may take up to five minutes for the washer to stop spinning and draining before the door will unlock. You will hear the door click when it unlocks.
If Pause/Cancel does not work:
  1. Unplug washer or disconnect power for one minute.
  2. Plug in washer or reconnect power.
  3. Re-select the cycle and press Start.
NOTE: If the error remains on the display, call for service.

Dec 19, 2008 | Whirlpool Duet GHW9150P Front Load Washer

3 Answers

Control lock light on-door opens-won't start


Press 'control' + 'pause:lock' +
'temperature' for 5 seconds
OR
'end of cycle' for 5 seconds. Tell me which worked & rate me pl.

Apr 16, 2008 | Whirlpool GHW9150 Front Load Washer

3 Answers

Whirlpool Duet model number GHW9100LW2-control lock button stuck on red, cant do anything else. Tried pushing the pause cancel button nothing......An ideas? Thanks!


Press the "End of Cycle Signal" button, the last button on the bottom right, for 5-10 seconds. That should resolve the problem.

Uppi

Sep 07, 2007 | LG WM2077CW Laundry XL Front Load...

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

979 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

prem mathew

Level 3 Expert

662 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...