I am trying to pair my 220 with my blackberry 9600. This is my 3rd BB. It won't let me pair this phone. Do I have to clear the other pairings? I no longer have these phones. Is there something else I need to do? The phone says audio device found but not plantronics 220 like the other 2 times

Hello,

To pair your BB to parrot go to connections
check whether the Bluetooth is ONthe search for devicesand when the name of the system comes..pair with the device.
Thank You.

You need to put the bluetooth into pairing mode.

tell the person with bt112 bluetooth to pair with you.. their will be a thing that pops up on your phone that says enter pair code just put 1234

Ok, well the password is something that you set from your blackberry device while you are in the process of paring.
So when you begin to pair the device your BB will ask you for a password, that's how you set the password. Then whatever password you chose when your BB asks for one will be the same password you use on the BT108 device.

try this, pair from the tomtom and not your BB, set your blackberry's bluetooth to discoverable.

from the tomtom search for BT devices, your BB should show up, connect to it, and when asked for a passkey try entering 1234 or 0000. if those dont work your BB should show that the tomtom is attempting to connect and should ask you whether to accept or deny, it may then ask for a passkey which you specify on your BB which you then enter on the tomtom

Just put your jawbone in pairing mode, usually by press and holding the on button for about 10 seconds. you should see the light flash blue and red alternately.The go to options on your BB and bluetooth then press the ball and add device you will have an option for allow another to find me, click it and when your jawbone pairs put in the default code which should be 0000 or 1234
you device will pair and your set

How to pair a Motorola HS850 bluetooth headset How to place a Motorola HS 850 bluetooth headset into paring mode:

1. Close the boom to turn the unit off.
2. Hold down the call button until the blue light comes on.
3. While holding down the call button, swing the boom open.

The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.

I paired my BT4051 with my BB curve just fine. I held down the power button on the Jabra until the blue light was solid and then added the device through my BB's bluetooth setup under options.

1. Go to Options/Bluetooth
2. Select device found
3. Select device properties
4. At Trusted select yes
It'll never ask again

Power it off
Press the power on button for at least 10 seconds, until it keep the blue ligth on and then pair it with your BB

;)