Question about Zenith R56W36 56" Rear Projection Television

2 Answers

Converence howe to fix converence using the remote

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I turn my tv on but all i get is sound and a blank screen

Posted on Nov 11, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 173 Answers

Green is fixed so you have to move red and blue to green.
by using the remote you may find a simple converge function and open this and using arrow keys move the blue or red first to center of screen, repeat for other color you should see the lines moving toward a a white center point.

if the lines do not move with remote try manual ...menu on the set. if still no movement you have a problem on the convergence board and need a tech to fix.

A service manual will explain complex convergence to the detail .
but this might take hours to get it right.

Posted on Aug 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mitsubishi ws - 5074 does it have a reset button


There is an A/V reset button on the front panel of the TV.
There is a converence reset in the user menu.
To do a full system reset ( new out of box ) - press home 1 2 3 on the remote control. This will bring up the reset menu. Hit enter on the remote and your TV will reset to factory specs.

Mar 19, 2013 | Mitsubishi VS-60719 60" Rear Projection...

1 Answer

Problems aligning convergence hc-p4753 projection


Hi,if the converence is wildly pinched in say one corner compared to the other colours then it is most likely that your convergence circuits have failed for that colour. - Warning,Not an easy fix without circuit schematics and can also be costly for the IC's too

Mar 19, 2010 | Samsung Televison & Video

1 Answer

Jvc 56in. rear projection. wavy lines, double visioned


you need to change converance chips do both STK392-120 you can also use 150

Apr 25, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Blue converence was intermitten now out on sides


If the IC's say have STK printed on them, then they are the convergence IC' s. should be three of them, replace all 3 , and the burned green coils, sometimes these burn as they supply the volts to the STK's. good luck, be safe..

Mar 11, 2009 | Sony KP-61V45 61" Rear Projection...

1 Answer

Kp46v15 converence


You need to replace STK4278-L quantity 2 on D board
Above part is available in part store.

Mar 02, 2009 | Sony KP-61V45 61" Rear Projection...

1 Answer

Replacement or instruction needed to fix T.V. Convergence


The conversion amp ICs. Let me know if you need more info.

Mar 04, 2008 | Televison & Video

1 Answer

Pioneer SD-P50A2 TV


Try soldering your convergence amplifier ICs. Sounds like it has a bad solder conection on the ICs. Check them good with a magnifying glass. Hope this helps you out. Let me know.

Jan 16, 2008 | Televison & Video

1 Answer

Zenith 50" R56W36


maybe on your remote press menu and find converence and use the keys to move the red first over the green then move the blue over the yellow ..by standing back and just using the remote....should end up with white lines. and dont hit that button again once set. a tech should do this quickly and charge you minium.

Aug 16, 2007 | Zenith R56W36 56" Rear Projection...

3 Answers

JVC AV-56WP74


sounds like a power supply7 problem such as a power regulator is bad or maybe the Horizonbtal deflection cu8rcuity is defective. sounds like something if you ask me? should be taken care of by the pros??? Im sorry not being able to assist you better but these sets have hundreds of volts nin them and shoulnt be played with by an unauthoized service company.. Good Luck

May 19, 2006 | JVC AV-56WP74 56" Rear Projection...

Not finding what you are looking for?
Zenith R56W36 56" Rear Projection Television Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69878 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...