New kodak easy share c85 put in scan disk 8gb cannot format

What model Kodak EasyShare camera? Some of them only work with SD cards, not with SDHC cards. The same applies to kiosks. Make sure the slot is marked "SDHC' and not simply "SD".

If the Camera is new or the SD Card is new then you don't have much problem,
use the installation CD that comes with the camera to install it driver on a computer, so can use the USB cord to explore the camera. on the computer, try to locate the SD Card and format it. then you can use the camera again.
If you have files on the digital camera then i am afraid you might have connected the camera earlier with a virus infected device. there is no choice but to fellow my step either to scan it with computer or better still format it with computer.
Hope to know the outcome!!

Is it a new SD card? Did it work before?
I have had similar problems with smaller SD cards, and I ended up just buying a 2GB, which works fine.

The Z760 works with MMC and SD cards. While an SDHC card will fit into the slot, it is electronically incompatible and will not work.

Hello,
kodak recommends max size of 1gig for the C330 some larger sizes might work but they don't reccomend.

Hope this helps

The V530 works with SD cards. Your new 8GB card is an SDHC card. While SDHC cards will fit into the slot, they are electronically incompatible and will not work. You need to go with SD cards, 2GB and smaller.

No. Can you get into the camera menu when you turn the camera on? If so, go to "format" by way of the menu rather than clicking on continue. Also, be sure the slide switch on the side of the card is in the unlocked position.

Go to radioshack they have a USB card reader for $20.00 that will scan 52 variations. Just plug it in your USB port and you are good to go. The reason your computer will not do it is because it cannot handle a 4GB card. Use a two GB and you should be good.

1. Insert the memory card into the camera. Make sure the card is firmly seated (push in the card until it clicks into place).
2. Turn on the camera.
3. Press the Menu button, then go to the Setup Menu.
4. Scroll up or down to the Format option, then press the OK button.
5. Follow the prompts to format the memory card.

Retrieved from www.kodak.com.

Try this: "options" then "media Card." Once inside the "media card" section, hit the function key (I suspect this is where you couldn't select the option) and select "format card."