Question about Brother MFC-8640D Printer

2 Answers

Error message-machine errror 6c - Brother MFC-8640D Printer

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Actualy the fuser has overheated and as a result probably has died.
the best thing to do is to replace the fuser and power suply (probably there is a short in the fuser drive thyristor causing the fuser to have been overheated).
After replacement of fuser and power suply you should reset the fault in service mode by doing the following:
1- press the Menu button,*, 2, 8, 6, and 4 keys in this order within 2 seconds.
2- press the keys 9 and 1 in this order to clear nv-ram
3- after nvr-init is done press key 9 twice to exit maintenance mode
4- power the printer off and on.

Posted on Oct 09, 2008


The fuser in not reaching operating temperature, probably the fuser has gone dead

Posted on Oct 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Errror message on pcr 208 register

It's strange that there is not an error number displaying but normally you would press clear (C) to clear an error. If it stays, there is a more serious problem and you aren't going to know what it is without an error number.

Feb 08, 2013 | Casio Parts Cash Register PC Desktop

1 Answer

Printer is giving me an errror message

this happen when you start the machine! or when you try printing or scanning?

Nov 23, 2011 | HP Deskjet F2210 InkJet Printer

1 Answer

Am getting a functional errror on our gestetner dsc424 to replace developer units magenta and yellow. replaced both toners, but error message will not clear, even after turning off and then on again. can...

Did you mean what you are saying?
If the machine are telling you to change the DEVELOPER UNIT why did you change the toner and hoped to reset the massage?????????????
If the machine are telling you to change the developer unit you need to change the developer unit!!!!!
Do that and your problem is solved

Sep 09, 2011 | Gestetner DSc424 Color Copier

2 Answers

6c10 errror message on canon mp640, tried suggested moving of printcartridge holder, no go. Any suggestions?

Hi, I solved this by doing a "cleaning roller" (dont know the right word in english) from the settings -> maintenance menu of the MP640. Good luck!

Oct 24, 2010 | Canon MP640 All-In-One InkJet Printer

2 Answers

How to reset blackberry with error message jvm error 513

JVM error its a java errror. try to remove memory card and then reset will solve the problem. may be your memory contain virus. connect your mobile to pc nad scan it with good antivirus.....

Nov 06, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Open cover show in fax - means what is the problem

this is telling you that the fax has encountered an error if you open the scanner cover this is where you put the doc in to send and close then open the front covers check that the cartridge is set properly and lastly check the paper path to see if there is a jam.. hope this help if you get an errror message describing fault let me know may be able to help more

Jun 06, 2009 | Brother IntelliFAX 4100 Laser Fax

1 Answer

Lid Error

Most systems either have a photo interrupter or a switch on the top to let the copier know its closed. Since you had it moved most likely they knocked it out of its position.Or broke the tab or plunger off.

Oct 17, 2007 | Konica Minolta DiALTA Di200 Copier

1 Answer

Error code meaning

this errror not related to psu section.After repairing this error occurs means its ncu or m.b. not properly packed, where machine last repaird send to that service centre check with this problem.

Dec 27, 2006 | Panasonic KX-FHD331 Plain Paper Thermal...

Not finding what you are looking for?
Brother MFC-8640D Printer Logo

536 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

478 Answers


Level 3 Expert

379 Answers


Level 3 Expert

830 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides