I need parts on hamilton beach cup holder model no.941-1 drink mixer

SOURCE: Replacement beaters for Hamilton Beach Hand/Stand Mixer Model 64586

Call the factory. they will point you in the right direction. number online!

SOURCE: Hamilton beach 950 cover removal

Look on the underside, under the feet. You may be able o find screws there that attach the front portion..

SOURCE: Hamilton Beach Model 27 (antique milkshake blender)

First off, check the supply cord. They usually dry out and the insulation crumbles, particularly at the point where they enter the body or motor. They short out. I've replaced cords on antique stand mixers I own. It can be a tricky operation.
Is the motor seized? Can you turn it by hand? (NOT plugged in, of course.)
If all else fails, send it to me and I'll fix it for a reasonable fee, if it is fixable at all.
dudeboy

SOURCE: Looking for manual on hamilton beach drink master

http://www.retrevo.com/s/Hamilton-Beach-730C-review-manual/id/19493ci056/t/1-2/

Hope this helps
Thanks for using Fixya
Have a nice day!

SOURCE: Looking for manual on hamilton beach drink master

http://www.hamiltonbeach.ca/use_care/download.php?f=750RC.pdf <- will that one do ?